Wireless Remote Control – LD12-ELITE Electric Heavy Duty Recovery Winch – by Driver Recovery Products – 12,000 lbs. Capacity

#ad
Driver Recovery Products LD12-ELITE #ad - A hand held wired remote control with 12' cord allows the line-out and line-in controls to be operated at a distance. Long drum. The series-wound motor allows consistent power through the duty cycle as opposed to magnet motors that may falter when they heat up. When disengaged, the drum will freespool, meaning the rope can be pulled without the motor.

The winch is easy to install; just mount the winch, connect the power, and ground. Premium 87 ft. Wireless remote control. The roller fairleads use wave washers and c-clips to secure the rollers, and dowel-pin bearings and composite bushings on the multi-directional rollers mean smooth operation even at extreme angles.

Wireless Remote Control - LD12-ELITE Electric Heavy Duty Recovery Winch - by Driver Recovery Products - 12,000 lbs. Capacity #ad - A wireless controller with battery is also included with a 75' range. Abrasion-resistant wire rope on 2 1/2 in. High, and weighs 90 pounds. Measures 21 1/4 in. The motor is reversible so the cable can be wound out or in. Industry standard 10" x 4-1/2" mounting bolt pattern. An upgraded direct-current 12-volt DC motor delivers maximum torque.

Diameter x 8 13/16 in.

#ad



Driver Recovery Products Waterproof Soft Winch Dust Cover - fits Model LD12-ELITE and X12-TITANIUM and Other winches

#ad
Driver Recovery Products 13 #ad - Made of water-resistant nylon. Protects winch from the elements. Deep. Measures 21 in. Designed for use with the driver recovery products ld12-elite and x12-titaniuM winch, 000 to 17, this soft winch cover conforms to many shapes and can be used with a variety of winches in the 8, 000 pound capacity range. Tall x 6-1/2 in.

Driver Recovery Products Waterproof Soft Winch Dust Cover - fits Model LD12-ELITE and X12-TITANIUM and Other winches #ad - Wide x 9-1/2 in. Stretched to its full size, the cover measures about 21" wide, 9-1/2" tall, and 6-1/2" deep. Sewn-in elastic band around the edges for secure fit. It conceals the winch to protect it from the elements, and is made of water-resistant nylon with a sewn-in elastic band around the edges so it fits securely around the winch.

#ad



Driver Recovery Products Bumper Hitch Receiver Winch Mount Mounting Plate

#ad
Driver Recovery Products FBA_W-MOUNT-3 #ad - Pack of mounting hardware included. Tall x 6-1/2 in. Wide x 9-1/2 in. Fairlead opening is centered to bolt patterns for perfect fairlead alignment. The front of the mount is pre-drilled for a standard 10" hawse or roller fairlead mounting holes are 10" on center and mouth opening is 8-13/16" x 1-1/4". Protects winch from the elements.

Driver Recovery Products Bumper Hitch Receiver Winch Mount Mounting Plate #ad - Standard 10" on center fairlead bolt pattern. The mounting plate area measures 14-5/8" long, 7" deep and 4" tall. Made of 3/16" high strength steel. Sewn-in elastic band around the edges for secure fit. Made of water-resistant nylon. Standard 10" x 4-1/2" winch mount pattern. Measures 21 in. Super-duty construction; fabricated from a single piece of ultra-high tensile strength, 3/16" steel plate.

Handle length: 7-1/8". Mount is coated with an epoxy grade finish which is significantly less likely to chip and rust than powder coated models. Ideal for 8000 lbs to 13, 000 lbs winches. Anti-rust powder coat finish. Deep.

#ad



by Driver Recovery Products - Waterproof Soft Winch Dust Cover - fits model LD17-PRO and many other large winches

#ad
Driver Recovery Products 13 #ad - Stretched to its full size, the cover measures about 21" wide, 10-1/2" tall and 8" deep. Tall x 8 in. Ideal for 8000 lbs to 13, 000 lbs winches. Wide x 10-1/2 in. Made of water-resistant nylon. Measures 21 in. Protects winch from the elements. Standard 10" on center fairlead bolt pattern. Made of 3/16" high strength steel.

by Driver Recovery Products - Waterproof Soft Winch Dust Cover - fits model LD17-PRO and many other large winches #ad - Designed for use with the driver recovery products ld12-elite and x12-titanium winch, 000 to 17, this soft winch cover conforms to many shapes and can be used with a variety of winches in the 12, 000 pound capacity range. It conceals the winch to protect it from the elements, and is made of water-resistant nylon with a sewn-in elastic band around the edges so it fits securely around the winch.

Measures 21 in. Protects winch from the elements. Deep. Sewn-in elastic band around the edges for secure fit. Made of water-resistant nylon. Anti-rust powder coat finish. Standard 10" x 4-1/2" winch mount pattern.

#ad



Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer

#ad
Driver Recovery Products FBA_QC-1 #ad - Size: connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set. The connectors are designed for low voltage use 12-36 volts DC. Terminal pins are 035" in diameter and can accept up to a 4 gauge wire. The set is compatible with any winch, but the ends may not match the connectors included with other brands.

Sewn-in elastic band around the edges for secure fit. Standard 10" on center fairlead bolt pattern. Current rating: for high-current use; true rated capacity 175 amps. Wide x 10-1/2 in. The set is easy to use; just insert the wires into the terminal pins, crimp or solder. The connectors are suited for high-current use with winches rated 8, 000 pounds or higher.

Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer #ad - Standard 10" x 4-1/2" winch mount pattern. Measures 21 in. They are mated, meaning they connect in only one direction polarity. The pins can then be inserted into the connector housing and lock in place. Universal: allows quick connect and disconnect for winches or other electrical devices. Made of water-resistant nylon.

#ad



2 Gauge 32 ft. Hi-Amp Universal Quick-Connect Wiring Kit for Trailer Mounted Winch

#ad
PolePalUSA #ad - Universal 3pc 32ft Quick disconnect trailer mounted winch, rear of vehicle winch wiring kit. Ask about dust covers, extra connectors, wire lugs, master jump sets, and more. Winch side, and 5 ft. Vehicle side, 12 ft. Shipping charges are not refundable Protects winch from the elements. Includes rubber dust cover red to winch positive, black to winch negative.

18-24 inch high amp, extreme grab parrot clamps one end and Anderson/SMH 175 connector other end for connecting winch to a battery or allowing this set to be used as a jumper cable set. Tall x 8 in. Measures 21 in. Example: 15 ft. 1 - 18-24 inch high amp, extreme grab parrot clamps one end and Anderson/SMH 175 quick connect other end for connecting winch to a battery or allowing this set to be used as a jumper cable set.

2 Gauge 32 ft. Hi-Amp Universal Quick-Connect Wiring Kit for Trailer Mounted Winch #ad - We can build a kit to your exact specs within 32 feet at no additional cost. This 32 foot kit includes: 1 - 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye end lugs with extra hold. Voltage: designed for low-voltage 12-36 volts DC use. Wide x 9-1/2 in. Deep. Standard 10" on center fairlead bolt pattern.

#ad



Energizer 1 Gauge 800A Permanent Installation kit Jumper Battery Cables with Quick Connect Plug 30 Ft Booster Jump Start - 30 Ft Allows You to Boost a Battery from Behind a Vehicle

#ad
ENERGIZER #ad - Ideal for 8000 lbs to 13, 000 lbs winches. Deep. Current rating: for high-current use; true rated capacity 175 amps. Measures 21 in. 1 gauge 30ft booster battery jumper cables with Permanent installation kit and Quick Connect. Booster cable comes with a travel bag - Ideal for use with full size cars and cargo vans, mid-size pickup truck and freight hauling vehicles.

800a heavy duty professional grade clamps. Voltage: designed for low-voltage 12-36 volts DC use. 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye. Standard 10" on center fairlead bolt pattern. Tall x 6-1/2 in. Made of water-resistant nylon. Wide x 10-1/2 in. Made of 3/16" high strength steel.

Energizer 1 Gauge 800A Permanent Installation kit Jumper Battery Cables with Quick Connect Plug 30 Ft Booster Jump Start - 30 Ft Allows You to Boost a Battery from Behind a Vehicle #ad - Wide x 9-1/2 in. Protects winch from the elements. Universal: allows quick connect and disconnect for winches or other electrical devices. Sewn-in elastic band around the edges for secure fit. Anti-rust powder coat finish.

#ad



TGL 3 inch, 8 Foot Tree Saver, Winch Strap, Tow Strap 30,000 Pound Capacity

#ad
TGL 3-8TS #ad - Protects winch from the elements. Protects winch from the elements. Sewn-in elastic band around the edges for secure fit. Deep. Tall x 8 in. Deep. Tall x 6-1/2 in. Current rating: for high-current use; true rated capacity 175 amps. Measures 21 in. Standard 10" x 4-1/2" winch mount pattern. 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye.

Copper clad aluminum Tangle free cables remains flexible even at -40°C. 1 gauge 30ft booster battery jumper cables with Permanent installation kit and Quick Connect. Booster cable comes with a travel bag - Ideal for use with full size cars and cargo vans, mid-size pickup truck and freight hauling vehicles.

TGL 3 inch, 8 Foot Tree Saver, Winch Strap, Tow Strap 30,000 Pound Capacity #ad - 800a heavy duty professional grade clamps. Great truck cable for installation on towing trucks. Made of water-resistant nylon. We do random testing on every production run to make sure our straps meet our expectations. 3", tree saver with 30, 8' heavy duty winch strap, 000 LBS limit. Size: connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set.

Ce, tuv certified tow strap at or above the listed limits.

#ad



HYCLAT 2-4 Gauge 175 A Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

#ad
HYCLAT CECOMINOD038518 #ad - Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. Package include: 2x polycarbonate cover; 2x hard plastic boot caps; 4x terminal pins. Standard 10" x 4-1/2" winch mount pattern. Wide x 10-1/2 in. Sewn-in elastic band around the edges for secure fit.

Voltage: designed for low-voltage 12-36 volts DC use. Ce and tuv tested at or above listed limits. Universal: allows quick connect and disconnect for winches or other electrical devices. Deep. Tall x 6-1/2 in. Copper clad aluminum Tangle free cables remains flexible even at -40°C. Tall x 8 in. 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye.

HYCLAT 2-4 Gauge 175 A Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer #ad - Includes rubber dust cover red to winch positive, black to winch negative. 18-24 inch high amp, extreme grab parrot clamps one end and Anderson/SMH 175 connector other end for connecting winch to a battery or allowing this set to be used as a jumper cable set. Size: connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set.

#ad



Orion Motor Tech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect Disconnect Plug Kit Recovery Winch Trailer, 12-36V DC 4 Pcs

#ad
Orion Motor Tech 13 #ad - Measures 21 in. Measures 21 in. Voltage: designed for low-voltage 12-36 volts DC use. 1-year warranty; 100% replacement or 100% refund. 3. Simple installation. Made of water-resistant nylon. 3" wide, tree saver, 8' long heavy duty winch strap, tow strap.30, 000 pound capacity. Reinforced loops protect against abrasion.

Yellow color with black, reinforced loops. Ce and tuv tested at or above listed limits. The bottom of the device features a fitted rubber boot to protect against dust, moisture and corrosion. The terminal pins accept wire from 2 to 4 gauge. Direct-current use high-voltage connectors usually have a socket and plug arrangement, or power end, so the socket, can be fully enclosed.

Orion Motor Tech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect Disconnect Plug Kit Recovery Winch Trailer, 12-36V DC 4 Pcs #ad - Includes rubber dust cover red to battery positive, black to battery negative. 6 foot 2 gauge winch side quick disconnect cable, including high contact 3/8 eye end lugs. Made of 3/16" high strength steel. Universal: allows quick connect and disconnect for winches or other electrical devices. Ideal for 8000 lbs to 13, 000 lbs winches.

#ad



Commercial Automotive Vehicle Booster Cables - ABN Jumper Cables, 25ft Long, 2-Gauge, 600 AMP - Motorcycle Car ATV

#ad
ABN 9012 #ad - Insert the wires into the terminal pins, then solder or crimp them. Ce and tuv tested at or above listed limits. The handles are designed for safe, secure clamping, and the cables are color coded to prevent crossing wires. Tall x 6-1/2 in. Protects winch from the elements. They offer tangle-free flexibility engineered for warm and cold climates, and the heavy-duty 2-gauge cable is 25 feet long for optimal reach.

Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either ends is suitable for connection to the power or load side. Made of 3/16" high strength steel. Package contents: package includes 1 set of ABN Jumper Cables 25' Feet, 2-Gauge, 600 AMP for your convenience.

Commercial Automotive Vehicle Booster Cables - ABN Jumper Cables, 25ft Long, 2-Gauge, 600 AMP - Motorcycle Car ATV #ad - Forget about getting stuck with a dead battery. Be prepared: keep the abn jumper cables, 25' feet long, 2-gauge, 600 amp - commercial Automotive Vehicle Booster Cables - Motorcycle Car ATV in your trunk or car emergency kit so you can safely boost jump your vehicle whenever need. Easy to use: color identification of cables prevents crossing of wires; Red + Black -; Tangle-free cables; For RVs, tractors, buses, semis.

Built to last: heavy-duty 2-gauge cable constructed with solid copper clamps to administer optimal contact; Serrated jaws; High-tension parrot clamps; Non-slip rubber coating offers a secure connection grip. Voltage: designed for low-voltage 12-36 volts DC use. Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.

#ad