Top 9 Upcut Spiral Bit – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.06 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

2. EANOSIC

#ad

Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving, 2” Cutting Length, EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long 4 inch, 1/2” Cutting Diameter

#ad
EANOSIC #ad - Premium quality: the spiral upcut router bits Made of solid carbide Tungsten steel, it is high-wearable and has a long life. And also for carbon steel, soft alloy steel, tool steel, OAK, aluminum alloy.

The cnc end mill router bits apply to various wood: such as plywood, MDF, cast iron, and any hardwood working and Long service life for sharp. Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length. You can decrease the times of changing cutters, save production time. The router bit suit for CNC router and any plunge routers with 1/2" collet. Spiral bits used for side milling, cycles and dados with clean edge and bottom, finish machining, etc. End mill bits can smoothly upcut groove and slots, end milling, Mortises, better than straight bits.
BrandEANOSIC #ad
ManufacturerEANOSIC #ad
Part NumberTungsten steel-4 inch

3. SpeTool

#ad

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank, 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Solid carbide up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Industrial quality control to ensure best performance. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Mortises, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-U

4. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Cycles and dado with clean edge and bottom, Plunge Mortises, better than straight bits. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

5. Whiteside Router Bits

#ad

Up Cut Solid Carbide 1/2-Inch Cutting Diameter and 2-Inch Cutting Length, Whiteside Router Bits RU5200T Three Flute with Spiral Bit

#ad
Whiteside Router Bits #ad - Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height6 Inches
Length3 Inches
Weight1 Pounds
Width4.5 Inches
Part NumberRU5200T
ModelRU5200T

6. SpeTool

#ad

Carving, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Cut, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U

7. SpeTool

#ad

1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, Carving

#ad
SpeTool #ad - The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-3/8-1/2-U

8. SpeTool

#ad

1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving, SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank

#ad
SpeTool #ad - Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. Industrial quality control to ensure best performance. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPLD1/4-1/4-U

9. Freud

#ad

Freud 1/4" Dia. Solid Carbide Up Spiral Bit with 1/4" Shank 75-102

#ad
Freud #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 1/4", cutting length h 1", 2 Flutes, 1/4" Shank. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.08 Pounds
Width1 Inches
Part Number75-102
Model75-102