As an Amazon Associate I earn from qualifying purchases.
1. RUYUFE #ad
Lid Support for Toy Box and Upward Top-Opening Flap Doors, RUYUFE Lid Stay 105 Degree Open with Soft Close, Easy to Install #adRUYUFE #ad
- This lid stay is deal for upward opening flaps, piano or butt hinges. Easy to install lid support-- updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Lid stay slow closing -- lid stay support built-in hydraulic dampening device. Keep lid hinge stay opening, cabinetry, vertical cabinet doors and storage box, such as toy boxes and vanity lids, WIDE USAGE -- Never worry again about having to prop the lid open.
Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas.
Sturdy lid stay with soft close-- the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. This lid support will hold the lid open until you are ready to close. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
2. Ravaver #ad
26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs Black, Ravaver Toy Box Hinges Soft Close #adRavaver #ad
- Strong support: for lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs. Gentle closing: all-new hydraulic slow-down mechanism for improved stability and safety.
Never worry about having to prop the lid open. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.
Lock lid open securely: hold your lid open at max 90 degrees until you are ready to push it shut. Note: one hinge for left-hand mounting, and the other one for right-hand mounting. Before purchasing: do not support the lid at width over 45in and height over 28in. Only takes 5 minutes to get installed by following the placement measurement card.
3. Apexstone #ad
Apexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Chest Toy Box Safety Hinge Soft Close Hinge, Set of 2 #adApexstone #ad
- Lids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers. Soft down the door/lid which the side length is less than 30 Inch, the WEIGHT is Less than 33 Lbs.
We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our SOFT DOWN LID GAS STRUT did not work well, refund or return.
Length center-to-center: 8. 7 inch220 mm, extended Length Center-to-Center:14. 2 inch360 mm. How to install&adjust it:just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.
4. Ryf #ad
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs #adRyf #ad
- Easy to install lid support --the lid hinge is used for side mounting and top mounting. Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
Installing screws and Allen wrench in package. Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function. Wide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Only mark two points for drilling holes, and screw each mounting bracket into its respective place.
5. Worldity #ad
Piano, Toy Box Lid Support Hinge, Worldity 2 Pack Box Lid Support Hinge Small, Lid Support Hinge Soft Close for Toy Box, Cabinets, Folding Slow Closing Cabinet Hinges, Max Weight Support 35lbs #adWorldity #ad
- Intimatest service: customers’ satisfaction is our top priority. High quality material: made of high quality zinc alloy, more stronger corrosion resistance and durability, to ensure that the lid hinge has high functionality.
Which provides you with a long-term service. They are soft closing with adjustable friction pressure, so that it doesn't slam closed, and weighing up to 35lbs. Before again, so if you measure its placement accurately, only need to trace the points for quick installation.
Finger savers: lid support hinge can be adjusted to 0-180°with hexagonal wrench. We provide 360 days free replacement, if you have any question about our soft close cabinet hinge, please feel free to contact us and we will reply within 4 hours.
Easy to install: instructions were graphic with dimensions and text description, it will work fine. Smooth operation: works good for holding open cabinet door and toy box, and these heavy duty hinges can really hold up the lid so it will not smash fingers. It is recommended to tighten hinge to make sure it doesn't drop too fast.
6. NAIERDI #ad
Toy Box Hinges, Kitchen Cabinet Hinges, Black Piano Hinge, Soft Close Hinges, Lift Support, NAIERDI 4 Pack 100N/22lb Gas Spring, Lid Support, Gas Strut #adNAIERDI #ad
- Applications * this gas spring lift is suitable for various kitchen cabinets, toy box, trunks and rv cabinets and so on. 1 year quality warranty * naierdi offers 1 year 100% satisfactory warranty.
Stable & rust protection* quality hinge head makes hinges stable. Come with clear instructions so you can install it with no effort. Total length :1063 inch, travel length: 3. 63 inch. 100n gas spring * pressure: 100n/22lb per strut, 4 struts included.
If there's a product quality issue or installation problems, please feel free to contact us. Soft-close hinges * these lid hinges can help open/close your kitchen overhead cabinets or toy box slowly to prevent from slaming or bumping. We will refund or replace your order to provide a best solution! Copper core piston and zinc plating prevent it from rusting.
7. MORINBO #ad
Easy to Install Pack of 2, Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors #adMORINBO #ad
- Know before purchasing updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting.
2-way installation morinbo hinges can be installed on top opening or upward opening lids. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
Compact design of lid stay hinge the compact design allows for installation in tight fit areas. Sturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers.
They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports 6lbs-20lbs. Easy to install comes with an exclusive original design installation card, only takes 5 minutes to complete the installation by following the install placement measurement card and installation video.
8. WANLIAN #ad
2 Pack Gas Spring, Gas Strut, Toy Box Hinges, Lid Support, Lift Supports, Kitchen Cabinet Hinges. 150N/33lb/15KG, Gas Shocks, Soft Close Hinges #adWANLIAN #ad
- Soft close hinges: this lid hinge can stop your toy box lid or cabinet door from slamming down, protect your fingers from being pinched. We will refund or replace your order to provide a best solution! Applications: this gas spring lift is suitable for window bench seat with storage box, windows, toy box, rv cabinets or kitchen cabinets and so on.
Heavy duty gas strut: 150n/33lb /15kg per strut, Total Length: 1063 inch, travel Length: 3.
63 inch. If there's a product quality issue or installation problems, please feel free to contact us. No-rusty: copper core piston and zinc-plating material keep gas strut away from rusting. 1 year quality warranty: sen offers 1 year 100% satisfactory warranty.
9. Pinnacle #ad
Soft Close Lid Support Hardware for Storage Bench & Toy Box Lids, Total Safely Supports 20lbs Supplements Flat Folding Hinges Drop Cabinet Doors 1 Pair 2 by Pinnacle Woodcraft #adPinnacle #ad
- Arm ball bearings insure smooth and long lasting operation. Hardware included: 1 pair2 total of soft close arms and all the mounting hardware along with a hex wrench for adjusting the arm tension and the opening angle.
Durable: the heavy duty zinc alloy hardware supports up to 20 lbs. Prevents pinched fingers: the adjustable hex screw allows for the setting of the soft closing tension to the weight of unit. Not included: Flat Folding Hinges.
Flexibe installations: the support hardware allows for right or left installations; adding the safe closing feature to toy benches, bench seats, storage benches, and drop cabinet doors. When the tension is set properly, this soft close hardware prevents pinched fingers or similar injuries. Per pair, and easily supports wooden bench lids up to five feet long when used along with flat folding hinges. 1 pair 2 Total.