Top 9 Table Saw Fence – Power Saw Fences

As an Amazon Associate I earn from qualifying purchases.

1. Delta


36-T30T3, Delta, 30 in. DELTA T3 Fence System

Delta #ad - One piece square tubular rail. 4mm. Length: fence 37 inch, Rail 57-1/2 inch. Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments. Mounting design attaches to Delta table saws including Contractor Saw, Hybrid Saw, and Unisaw models. Max rip to left of Blade-13-1/2 inch. Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch 0 Easy-gliding, steel tube fence body to handle Quick, precision ripping, and square cuts.
BrandDelta #ad
ManufacturerDelta #ad
Height2.5 Inches
Length37 Inches
Width6 Inches
Part Number36-T30T3
Warranty2 Year

2. Vega


Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right

Vega #ad - Table saw fence system; saw not included. 36-inch fence bar 26 inches to right, 8 inches to left of blade; micro adjustment and auxiliary table support. Table saw fence system fits a variety of saws. Steel construction; assembly required. 34 pounds.
BrandVega #ad
ManufacturerVega #ad
Height4 Inches
Length54 Inches
Width8 Inches
Part NumberZQ-1121-02-02

3. Shop Fox


57-Inch, Shop Fox W1716 Aluma-Classic Fence with Standard Rails

Shop Fox #ad - Standard 57-inch rails provide 30-inch maximum rip to the right of the blade. Wide right angle design for maximum accuracy and support. Steel and aluminum fence body for durability, strength, and reduced weight. Easy single locking cam action lever. Fits most table saws easily.
BrandShop Fox #ad
ManufacturerWoodstock International INC #ad
Height7 Inches
Length17.25 Inches
Width61 Inches
Part NumberW1716

4. Fulton


Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

Fulton #ad - The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. When not in use the flip stop can be flipped up and out of the way. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.

1 hole is at 90 degrees while the 6 holes on both sides are at 22. 5, 45, 30, 67.55 and 90 degrees. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting.

Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The head is mounted to a solid steel miter bar that measure 18” in length and is. 353” thick by. 730” wide. The fence comes with a flip stop that makes repetitive cuts a breeze.
BrandFulton #ad
ManufacturerFulton Woodworking Tools Inc. #ad
Part Number11567

5. iGaging


IGaging 35-0928 Digital Saw Gauge

iGaging #ad - Test your table saw alignment, fence alignment. Tool. Designed for completing numerous tests in your shop.
BrandiGaging #ad
ManufactureriGaging #ad
Weight1.11 Pounds
Part Number35-0928



DEWALT 514013598 Fence Assembly

DEWALT #ad - Fits various DEWALT models. Part number 514013598. This is an o. E. M authorized part. Oem part number 514013598. This is an o. E. M. Part. This is a dewALT replacement part.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height1 Inches
Length1 Inches
Width1 Inches
Part Number514013598



MTS01A, Extended Desktop, 15-Amp 24T Blade 4800 RPM 45ºBevel Cutting With Pusher, Rip Fence, Miter Gauge, TACKLIFE Table Saw 10 Inch, Heavy-Duty Metal Stand

TACKLIFE #ad - Aluminum extension table:the dimension of flat tabletop is 25. 3''x 28. 3'', the extension length is up to 3. 9'' on both sides providing more stability when cutting long wood. The 2-2-1/4" dust collection port can be connected with the vacuum cleaner to keep the table surface clean.

Metal Stand provides good stability. Max cut depth is 2-4/5'' at 90°and 2'' at 45°. The 10'' 24t carbide-tipped blade is aligned with the riving knife well. Miter angle can be adjusted from -45°to +45°. More intimate designthe :transparent blade guard keeps visibility. The outside of the table saw comes with a wrench hook for easy operation. Cross piece is molded aluminum, which is durable and stable.

Flexible 90° & 45° bevel cutting:bevel tilt angle handle allows a left bevel cutting from 0-45° easily. Extending the applications of the saw table. The specially coated aluminum table surface has excellent oxidation resistance and deformation resistance. Rip fence&miter gauge: the fence can be placed on both sides according to your need. Max rip capacity is 16.
ManufacturerTACKLIFE #ad
Height43.31 Inches
Length36.22 Inches
Weight47.4 Pounds
Width26.77 Inches
Part Number1

8. Milescraft


Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

Milescraft #ad - Dual slide motion-side to side and forward action for quick and easy setup. Split rail miter bar construction-provides maximum hold. Pre-load tension design maintains consistent pressure across face of the feather board. 5/8" and 3/4" metal miter bars fit all standard miter slots.

Unique pre-load tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back. All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.

This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction. Split rail miter bar construction-provides maximum hold. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. Dual slide motion-side to side and forward action for quick and easy setup. Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2.85 Inches
Length8.9 Inches
Weight1 Pounds
Width10.5 Inches
Part Number1406

9. Fulton


Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

Fulton #ad - The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. The flip stop can can simply be flipped it up and out of your way when not in use. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process.

While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This fence will fit most available after market and factory table saw miter gauges, however some modification may be required. The fulton aluminum miter fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts.

On the back, there is an offset track for mounting the fence to a miter gauge. Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. The aluminum miter fence has been cut at 45 degrees on both ends of the fence. The fence can be mounted to low profile miter gauges or standard profile miter gauges simply by flipping the fence over to accommodate your miter gauge.
BrandFulton #ad
ManufacturerFulton Woodworking Tools and Accessories #ad
Part Number11563