Top 9 Solder Flux Remover – Welding Equipment & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. MG Chemicals

#ad

MG Chemicals 4140A Flux Remover for PC Boards, 1 Quart Bottle

#ad
MG Chemicals #ad - Rohs compliant. Safe on most plastics. Suitable for use in food facilities as a Non-Food Chemical – Canadian and NFS recognition letters available on request. Use when a general-purpose zero residue flux remover is required. Removes rosin, non-rosin, and no clean fluxes as well as ionic and non-ionic residues.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height3.02 Inches
Length3.02 Inches
Weight1.54 Pounds
Width9.57 Inches
Part Number4140A-945ML
Model4140A-945ML
Warranty[email protected]

2. Lesnow

#ad

Lesnow solder wick braid with flux Super 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components

#ad
Lesnow #ad - The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency. The solder wicks can be used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, desoldering computer parts such as a motherboard, remove relays and other components from printed circuit boards, unsoldering old wire from devices, clean alloy on smd components and more.

The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.

This desoldering wick has geometrically-precise weave with copper and rosin, once the desoldering wick and the solder has been heated, work from the tip of the desoldering wick, the solder braid can quickly absorbed molten solder and left a clean working area.1 pieces of no-clean solder wicks, each wick is about 10ft long and 01 inch in width, enough quantity and length for your daily needs.
BrandLesnow #ad
ManufacturerLesnow-FT #ad
Height0.5 Inches
Length5 Inches
Weight0.5 ounces
Width4 Inches
Part NumberLesnow-FT-01

3. MG Chemicals

#ad

425g 14.90 oz Aerosol Can, MG Chemicals, 413B-425G 413B Heavy Duty Flux Remover

#ad
MG Chemicals #ad - Use when an aggressive flux remover is required. Excellent for dissolving flux on the solder side of PC boards. Suitable for use with rosin, non-rosin, and no clean fluxes. Will harm delicate plastic components. Excellent for use in spot removing hard burnt on flux from the component side of PC boards.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Weight1.12 Pounds
Part Number413B-425G
Model413B-425G
Warranty[email protected]

4. Tech Spray

#ad

General Purpose Defluxer, 10 oz Can, Tech Spray 1621-10S EcoLine Flux Remover

#ad
Tech Spray #ad - Non-ozone depleting. Safe on most plastics. Epa snap approved. Zero residue. Rapidly evaporating.
BrandTech Spray #ad
ManufacturerTech Spray #ad
Height7.9 Inches
Length2.5 Inches
Weight0.63 Pounds
Width2.6 Inches
Part Number1621-10S
Model1621-10S

5. Ferraycle

#ad

No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance 6 Pieces

#ad
Ferraycle #ad - Suitable size: the rosin pen measures about 14. 3 cm/ 5. 6 inches in length, and the solder braided wick is about 1. 5m/ 59 inches long and 2. 5mm/ 01 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing. Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.

Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, no leaking and safe for protecting the flux, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, preventing you from touching the organic solvents.

Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, electronics welding, etc. Home repairs and correcting small PCB board errors and through hole solder joints, bringing a lot of convenience to your work and improving efficiency. Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
BrandFerraycle #ad
ManufacturerFerraycle #ad
Part NumberFerraycle-Flux Pen-17

6. Rainbow Art Glass, Inc.

#ad

C.J.'s Flux Remover, Convenient Pour Spout, 8oz. Bottle, Environmentally Friendly, The Finest for Over 40 Years

#ad
Rainbow Art Glass, Inc. #ad - Allows copper patina to produce a bright shiny finish, NOT RECOMMENDED FOR ELECTRONICS. Prevents oxidation crust from improper cleaning. Environmentally Safe, Non-Caustic. Convenient pour spout! Thoroughly removes greasy messes and residues from all types of flux and solder.
BrandRainbow Art Glass, Inc. #ad
ManufacturerRainbow Art Glass #ad

7. MG Chemicals

#ad

MG Chemicals 4140A-P Flux Remover Pen, 11.5mL,Clear

#ad
MG Chemicals #ad - Use when a general-purpose zero residue flux remover is required. Removes rosin, non-rosin, and no clean fluxes as well as ionic and non-ionic residues. Safe on most plastics. Rohs compliant. Suitable for use in food facilities as a Non-Food Chemical – Canadian and NFS recognition letters available on request.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height2.02 Inches
Length1.01 Inches
Weight0.02 Pounds
Width7.56 Inches
Part Number4140A-P
Model4140A-P
Warranty[email protected]

8. Lesnow

#ad

Soldering Wick Disassemble Electrical Components,copper desolder wick Braid, Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool

#ad
Lesnow #ad - The braided solder wicks are suitable for labs, unsoldering old wire from devices, can be used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, home and industry welding work, remove relays and other components from printed circuit boards, desoldering computer parts such as a motherboard, clean alloy on smd components and more.

1 pieces of no-clean solder wicks, each wick is about 10ft long and 012 inch in width, enough quantity and length for your daily needs. If for any reason you are not 100% satisfied with lesnow solder cores, we support you with a full refund. If you have any questions about the use of the product or the product is damaged, please contact us and our engineers will solve the problem for you as soon as possible.

This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area. If you are using the solder wick for the first time, in order to prevent burns, it is recommended to use a multi-point flux to assist in cleaning,At the same time, do not directly touch the solder core at close range during use.
BrandLesnow #ad
ManufacturerLesnow-DW #ad
Part NumberLesnow-DW3030

9. BEEYUIHF

#ad

BEEYUIHF 3M/10ft 1.5mm Desoldering Wick Braid, Solder Wick Braid with Flux, No-clean Solder Remover Wire Kit,Cable Remover Tool Solder Sucker,W 0.06'' L 9.8' Pack of 2Pcs

#ad
BEEYUIHF #ad - Beeyuihf desoldering wick with flux size: w 006'' l 9. 8'; width:1. 5mm, length: 3m/10ftPack of 2Pcs. Increase the speed of cleaning the PCB pad. Solder remover wire materials:the tin suction line is woven with flat needles, soft design, fast heat conduction, not only improving work efficiency and quality, suitable for rapid tin suction, but also more clean.

The braided desoldering Wicks are made of 100% copper wires with a fine braid design. Wide range of use:the braided solder wick is suitable for studio, professional repair, school, laboratory, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, home, Increase the speed of cleaning the PCB pad.

Speed up the speed of absorbing tin and low residue of flux. Desoldering wick advantage: refined chemical formula, clean tin absorption. Fast heat conduction, resistant to oxidation and corrosion, suitable for various electronic PCB circuit boards. The desoldering wicks feature: oxidation resistivity and anti-corrosion protection, good thermal conductivity. Bring convenience to your welding work.
BrandBEEYUIHF #ad
ManufacturerBEEYUIHF #ad
Weight0.07 Pounds
ModelI001-XD300-Set