Top 9 Mini Lathe Chuck – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking


PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking #ad - Includes: 1 barracuda2 chuck body, 1 gear key, 1 spindle adapter, 1 Allen wrench, 8 screws, 4 self-centering jaw sets, 1 woodworm screw chuck, 1 storage case.1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4".

Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, 8-1/4" Super Finishing Jaws CJAWXL, Set of 2 Alligator Jaws LCALJAWS, pen blank Drilling Jaws CJAWPEN, 5" Small Flat Jaws CJAWFJ1, and more!. Barracuda2 chuck body is 3. With the variety of included jaws, spindles, pens, other small turning projects, The CSC3000C will mount most turning projects onto your Lathe; including bowls, and much more.5" diameter and weighs 2. 60 lbs.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
Warranty2 Years Under Normal Use

2. Faddare


Mini Lathe Chuck Set, 3/4 Jaw Mini Lathe Chuck Self Centering Lathe Chuck Connecting Rod Zinc Alloy Z011 Extension Three Four Jaw Chuck and Connecting Rod Set, Electric Drill Chucksize:Type B

Faddare #ad - Application: design of three/four jaws, drilling and machine accessories, milling machines, widely used for woodworking lathe. Type c: 1pc x connecting rod, 1pc x Four Jaw Chuck 1pc x Wrench.

Accurate: with high centering accuracy as well as a large clamping range. The chuck is suitable for machine tools and accessories for general lathes, grinding machines, self-centering, economical CNC lathes, etc. High strength and hardness, small size, comfortable to wear. Material: made up of zinc alloy material, not easy to rus-t, anticorrosion, durable and sturdy. Compact size: the compact chuck is small in volume, easy to use. Package include: type a: 1pc x connecting rod. Type b: 1pc x connecting rod, 1pc x Three Jaw Chuck, 2pcs x Short Sticks.
BrandFaddare #ad
ManufacturerFaddare #ad
Height0.43 Inches
Length2.36 Inches
Width2.36 Inches
Part Number16231382760979

3. vector tools



vector tools #ad - Mandrel material: 1010 low carbon steel. Shank length: 3 1/8". Capacity: 5/64'' to 1/2''. Mounting holes: Jacobs taper #33. Mandrel taper: MT2.
Brandvector tools #ad
ManufacturerJ&R Quality Tools #ad
Height4 Inches
Length6 Inches
Width4 Inches



RATTMMOTOR 4-Jaw K12-80mm Self-centering Linkage Lathe Chuck with Chuck Wrench for CNC Router Engraving Milling Machine

RATTMMOTOR #ad - Mode name: k12 series 4-Jaw self-centering chuck. Max speed: 4000R/min. Diameter:80mm; max input torque: 40N. M;. Internal jaw clamping range: 2-22mm; Internal jaw jamming range: 25-70mm; External jaw clamping range: 22-63mm. Grease must be emptied out from the threaded holes of chuck before mounting.
ManufacturerRTM #ad
Part NumberK12-80

5. Mophorn


Mophorn K72-125 Lathe Chuck 5 Inch 4-Jaw,Lathe Chuck Independent Reversible Jaw,Metal Lathe Chuck Turning Machine Accessories,for Lathes Machine

Mophorn #ad - The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. Of high precision: the 4-jaw lathe chuck works accurately, bearing tolerance of ≤007 mm 0003 in to ensure satisfying metal processing.

Premium material: diameter: diameter: 125 mm 4. 92 in. So it is rigid and durable. Reversible jaw set: the lathe chuck is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes. Enhanced flexibility: the t chuck key of the lathe part allows the installation of various workpieces. It is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes. And easy operation reduces changeover time for your convenience. Remarkable versatility: this chuck has a compact construction.
BrandMophorn #ad
ManufacturerMophorn #ad
Part NumberK72
ModelK72-125 Lathe Chuck 5 Inch 4-Jaw



Z011 Three-Jaw Chuck Zinc Alloy 3-Jaw Chuck Lathe Chuck Clamp Accessory for Mini Metal LatheSize:B

SYCOOVEN #ad - Model: z011; outside diameter: 12-65mm/05-2. 6inch; inner diameter: 1. 8-56mm/01-2. 2inch. High quality: lathe chuck high quality 3-jaw chuck has been widely applied in machine tool accessories.

Independent jaws: 3-jaw design, easy to use. Each jaw can be adjusted separately, compact size, clamping rectangle and irregular shaped workpieces can be achieved. All guideways and bearing surfaces are precisely machined. Applicable: both sides of jaw teeth and guides are ground and hardened and the chuck is suitable for machine tools and accessories for general lathes, milling machines, economical CNC lathes, grinding machines, etc. Quality material: made of high quality material, wear-resistant, strong and durable.
ManufacturerSYCOOVEN #ad
Height0.31 Inches
Length2.36 Inches
Weight0.51 Pounds
Width2.36 Inches
Part Number16230347547456



Self Centering Wood Turning Chuck, JNYLLN Z011 3-Jaw Lathe Chuck, Power Lathe Accessory, Mini Lathe Chuck with Connecting Rod and Short Sticks

JNYLLN #ad - Featureshigh strength and hardness, small size, comfortable to wear. Compact sizethe compact chuck is small in volume, easy to use. Accuratewith high centering accuracy as well as a large clamping range. Applicationdesign of three/four jaws, self-centering, widely used for woodworking lathe. Materialmade up of high carbon steel material, not easy to rust, anticorrosion, durable and sturdy.
BrandJNYLLN #ad
ManufacturerJNYLLN #ad
Height0.31 Inches
Length2.36 Inches
Width2.36 Inches
Part Number16184695371249



SENDUO 2.75-Inch Wood Lathe Chuck ,4-Jaw Precision Self-Centering Key Lathe Chuck,1Inch x 8TPI Mini Thread Wood Turning Chuck Wood Lathe Accessories for Bowls Vases

SENDUO #ad - Inner jaws tighten around workpieces varying from 1" to 1. 9". Applicable workpiece size:the package contains a set of round jaws. Will greatly extend the service life of the chuck. These can help you better install the chuck on the lathe.

The wood screw and sliding T-handle chuck key provides additional grip strength help you hold the workpiece better in the process. Application:this complete lathe chuck set includes a precision jaw and a set of installation tools, spindles, which bring much convenience to your operation. Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.

High performance jaws:the 4 jaws lathe chuck has the function of self centering with superior gripping force, it does not need to be repeatedly calibrated during clamping. Free accessories:we will provide you with a set of installation tools. Excellent quality:the 2. 75inch self-centering keyed lathe chuck body is made of high-quality steel. Outer jaws spread inside of workpieces with pilot holes ranging from 1. 4" to 2.
BrandSENDUO #ad
ManufacturerSENDUO #ad
Part Number1

9. BestEquip


Mini Lathe with 3-Jaw Chuck, BestEquip Metal Lathe, Bench Top Metal Lathe, 8" x 16" Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, for Various Types of Metal Turning

BestEquip #ad - Swing over bed: 8-1/4" 210 mm and swing over cross Slide: 15-3/4" 400mm offers more possibilities for large size or/and heavy workpieces. Spindle Accuracy: 00004-00012" 001-003 mm. The led screen shows you a clear and accurate speed for accurate working.

Supportive & protective: soft start, change-over switch for clockwise or counter-clockwise spindle rotation. 400mm large swing range: the benchtop lathe is equipped with a 3-jaw chuck. Professional compound rest: the mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. Variable speed: 0-2250RPM. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel.

Steady rest works as end support ensuring chatter-free operation. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Travel: compound rest 2-1/8" 54mm, cross slide 3" 76mm. 4-way turret tool post 3/8" max tool size. Equipped with all-metal gears. Infinitely variable speed: the mini metal lathe with metal gears is driven by powerful motor.
BrandBestEquip #ad
ManufacturerBestEquip #ad
Height20 Inches
Length38 Inches
Width20 Inches
Part NumberMetal Lathe 8x16 Inch
ModelMetal Lathe 8x16 Inch