As an Amazon Associate I earn from qualifying purchases.
PSI Woodworking #ad - This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, 8-1/4" Super Finishing Jaws CJAWXL, 5" Small Flat Jaws CJAWFJ1, Pen Blank Drilling Jaws CJAWPEN, Set of 2 Alligator Jaws LCALJAWS, and more!.
5" diameter and weighs 2. 60 lbs. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4".
Faddare #ad - Application: design of three/four jaws, self-centering, grinding machines, milling machines, widely used for woodworking lathe. Type b: 1pc x connecting rod, 1pc x Three Jaw Chuck, 2pcs x Short Sticks.
Compact size: the compact chuck is small in volume, small size, easy to use. Material: made up of zinc alloy material, anticorrosion, not easy to rus-t, durable and sturdy. The chuck is suitable for machine tools and accessories for general lathes, economical CNC lathes, drilling and machine accessories, etc.
RATTMMOTOR #ad - Diameter:80mm; max input torque: 40N. M;. Grease must be emptied out from the threaded holes of chuck before mounting. Internal jaw clamping range: 2-22mm; Internal jaw jamming range: 25-70mm; External jaw clamping range: 22-63mm.
Mophorn #ad - Of high precision: the 4-jaw lathe chuck works accurately, bearing tolerance of ≤007 mm 0003 in to ensure satisfying metal processing. So it is rigid and durable.
Enhanced flexibility: the t chuck key of the lathe part allows the installation of various workpieces. Reversible jaw set: the lathe chuck is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes.
SYCOOVEN #ad - Independent jaws: 3-jaw design, compact size, easy to use. Each jaw can be adjusted separately, clamping rectangle and irregular shaped workpieces can be achieved.
Applicable: both sides of jaw teeth and guides are ground and hardened and the chuck is suitable for machine tools and accessories for general lathes, economical CNC lathes, grinding machines, milling machines, etc.
JNYLLN #ad - Compact sizethe compact chuck is small in volume, easy to use. Featureshigh strength and hardness, small size, comfortable to wear. Accuratewith high centering accuracy as well as a large clamping range.
SENDUO #ad - These can help you better install the chuck on the lathe. The wood screw and sliding T-handle chuck key provides additional grip strength help you hold the workpiece better in the process. Will greatly extend the service life of the chuck.
It just needs to clamp the workpiece according to your needs, fast and convenient. High performance jaws：the 4 jaws lathe chuck has the function of self centering with superior gripping force, which is simple, it does not need to be repeatedly calibrated during clamping.
Free accessories：we will provide you with a set of installation tools. Applicable workpiece size：the package contains a set of round jaws. The chuck has 1" x 8 TPI Thread. Applicable to hold bowls, spindles, and other bulky wood lathe projects. Excellent quality：the 2. 75inch self-centering keyed lathe chuck body is made of high-quality steel.
BestEquip #ad - Variable speed: 0-2250RPM. Swing over bed: 8-1/4" 210 mm and swing over cross Slide: 15-3/4" 400mm offers more possibilities for large size or/and heavy workpieces. Infinitely variable speed: the mini metal lathe with metal gears is driven by powerful motor.
Backsplash guard included. Equipped with all-metal gears. 4-way turret tool post 3/8" max tool size. The led screen shows you a clear and accurate speed for accurate working.
Steady rest works as end support ensuring chatter-free operation. Spindle Accuracy: 00004-00012" 001-003 mm. Professional compound rest: the mini lathe machine quick change tool post can achieve positions of internal cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, face cutting, moving blades freely with feed rod.
1. PSI Woodworking
#adPSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
#ad5" diameter and weighs 2. 60 lbs. 1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4".
More information #ad
Includes: 1 barracuda2 chuck body, 1 woodworm screw chuck, 4 self-centering jaw sets, 8 screws, 1 gear key, 1 Allen wrench, 1 spindle adapter, 1 storage case. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. With the variety of included jaws, spindles, The CSC3000C will mount most turning projects onto your Lathe; including bowls, other small turning projects, pens, and much more. Barracuda2 chuck body is 3.| Brand | PSI Woodworking #ad |
| Manufacturer | PSI Woodworking #ad |
| Height | 5.25 Inches |
| Length | 10.2 Inches |
| Weight | 8.6 Pounds |
| Width | 5 Inches |
| Part Number | CSC3000C |
| Model | CSC3000C |
| Warranty | 2 Years Under Normal Use |
More information #ad
2. Faddare
#adElectric Drill Chucksize:Type B, Mini Lathe Chuck Set, 3/4 Jaw Mini Lathe Chuck Self Centering Lathe Chuck Connecting Rod Zinc Alloy Z011 Extension Three Four Jaw Chuck and Connecting Rod Set
#adCompact size: the compact chuck is small in volume, small size, easy to use. Material: made up of zinc alloy material, anticorrosion, not easy to rus-t, durable and sturdy. The chuck is suitable for machine tools and accessories for general lathes, economical CNC lathes, drilling and machine accessories, etc.
More information #ad
Accurate: with high centering accuracy as well as a large clamping range. High strength and hardness, comfortable to wear. Type c: 1pc x connecting rod, 1pc x Four Jaw Chuck 1pc x Wrench. Package include: type a: 1pc x connecting rod.| Brand | Faddare #ad |
| Manufacturer | Faddare #ad |
| Height | 0.43 Inches |
| Length | 2.36 Inches |
| Width | 2.36 Inches |
| Part Number | 16231382760979 |
More information #ad
3. vector tools
#adMINI METAL LATHE TAIL STOCK DRILL CHUCK TOOL WITH MT2 MORSE TAPER ARBOR MT 2
#advector tools #ad - Shank length: 3 1/8". Mandrel taper: MT2. Capacity: 5/64'' to 1/2''. Mandrel material: 1010 low carbon steel. Mounting holes: Jacobs taper #33.More information #ad
| Brand | vector tools #ad |
| Manufacturer | J&R Quality Tools #ad |
| Height | 4 Inches |
| Length | 6 Inches |
| Width | 4 Inches |
More information #ad
4. RATTMMOTOR
#adRATTMMOTOR 4-Jaw K12-80mm Self-centering Linkage Lathe Chuck with Chuck Wrench for CNC Router Engraving Milling Machine
#adMore information #ad
Max speed: 4000R/min. Mode name: k12 series 4-Jaw self-centering chuck.| Brand | RATTMMOTOR #ad |
| Manufacturer | RTM #ad |
| Part Number | K12-80 |
More information #ad
5. Mophorn
#adMophorn K72-125 Lathe Chuck 5 Inch 4-Jaw,Lathe Chuck Independent Reversible Jaw,Metal Lathe Chuck Turning Machine Accessories,for Lathes Machine
#adEnhanced flexibility: the t chuck key of the lathe part allows the installation of various workpieces. Reversible jaw set: the lathe chuck is equipped with three inward stepped jaws that can be stepped inward or outward to hold raw materials of different shapes.
More information #ad
It is suitable for installation on a metal lathe chuck and clamping workpieces of various shapes. Remarkable versatility: this chuck has a compact construction. The 4-jaw mini lathe chuck body is made of cast iron that has passed rigorous quality tests. And easy operation reduces changeover time for your convenience. Premium material: diameter: diameter: 125 mm 4. 92 in.| Brand | Mophorn #ad |
| Manufacturer | Mophorn #ad |
| Part Number | K72 |
| Model | K72-125 Lathe Chuck 5 Inch 4-Jaw |
More information #ad
6. SYCOOVEN
#adZ011 Three-Jaw Chuck Zinc Alloy 3-Jaw Chuck Lathe Chuck Clamp Accessory for Mini Metal LatheSize:B
#adApplicable: both sides of jaw teeth and guides are ground and hardened and the chuck is suitable for machine tools and accessories for general lathes, economical CNC lathes, grinding machines, milling machines, etc.
More information #ad
Model: z011; outside diameter: 12-65mm/05-2. 6inch; inner diameter: 1. 8-56mm/01-2. 2inch. High quality: lathe chuck high quality 3-jaw chuck has been widely applied in machine tool accessories. All guideways and bearing surfaces are precisely machined. Quality material: made of high quality material, wear-resistant, strong and durable.| Brand | SYCOOVEN #ad |
| Manufacturer | SYCOOVEN #ad |
| Height | 0.31 Inches |
| Length | 2.36 Inches |
| Weight | 0.51 Pounds |
| Width | 2.36 Inches |
| Part Number | 16230347547456 |
More information #ad
7. JNYLLN
#adMini Lathe Chuck with Connecting Rod and Short Sticks, Self Centering Wood Turning Chuck, Power Lathe Accessory, JNYLLN Z011 3-Jaw Lathe Chuck
#adMore information #ad
Materialmade up of high carbon steel material, not easy to rust, anticorrosion, durable and sturdy. Applicationdesign of three/four jaws, self-centering, widely used for woodworking lathe.| Brand | JNYLLN #ad |
| Manufacturer | JNYLLN #ad |
| Height | 0.31 Inches |
| Length | 2.36 Inches |
| Width | 2.36 Inches |
| Part Number | 16184695371249 |
More information #ad
8. SENDUO
#adSENDUO 2.75-Inch Wood Lathe Chuck ,4-Jaw Precision Self-Centering Key Lathe Chuck,1Inch x 8TPI Mini Thread Wood Turning Chuck Wood Lathe Accessories for Bowls Vases
#adIt just needs to clamp the workpiece according to your needs, fast and convenient. High performance jaws：the 4 jaws lathe chuck has the function of self centering with superior gripping force, which is simple, it does not need to be repeatedly calibrated during clamping.
More information #ad
Outer jaws spread inside of workpieces with pilot holes ranging from 1. 4" to 2. 5". The sturdy chuck can withstand high-intensity work without damage. Application:this complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. Free accessories：we will provide you with a set of installation tools. Applicable workpiece size：the package contains a set of round jaws. The chuck has 1" x 8 TPI Thread. Applicable to hold bowls, spindles, and other bulky wood lathe projects. Excellent quality：the 2. 75inch self-centering keyed lathe chuck body is made of high-quality steel.
| Brand | SENDUO #ad |
| Manufacturer | SENDUO #ad |
| Part Number | 1 |
More information #ad
9. BestEquip
#adFor Various Types of Metal Turning, Mini Lathe with 3-Jaw Chuck, 8" x 16" Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, BestEquip Metal Lathe, Bench Top Metal Lathe
#adBacksplash guard included. Equipped with all-metal gears. 4-way turret tool post 3/8" max tool size. The led screen shows you a clear and accurate speed for accurate working.
More information #ad
To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Operate either manually or with the adjustable auto feed rate. 400mm large swing range: the benchtop lathe is equipped with a 3-jaw chuck. Steady rest works as end support ensuring chatter-free operation. Spindle Accuracy: 00004-00012" 001-003 mm. Professional compound rest: the mini lathe machine quick change tool post can achieve positions of internal cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, face cutting, moving blades freely with feed rod.
| Brand | BestEquip #ad |
| Manufacturer | BestEquip #ad |
| Height | 20 Inches |
| Length | 38 Inches |
| Width | 20 Inches |
| Part Number | Metal Lathe 8x16 Inch |
| Model | Metal Lathe 8x16 Inch |
More information #ad
