As an Amazon Associate I earn from qualifying purchases.
Laguna Tools #ad - Laguna ceramic guides | hi/low aluminum fence | Worm Gear Rack & Pinion | Massive Cast Trunion 8"X13". Blade width: 1/8" | footprint: 17 1/2" x 22 1/2" | Quick release tension | magnetic blade guard.
Laguna Tools #ad - Motor: 3hp, 220v, 1 ph. Window for tension. Min-max blade width: 1⁄8 in. Resaw capacity: 16 in. 1 1⁄4 in. 220v outlet on back for light. Disc-brake with micro switch. Throat: 18 in. Blade length: 145 in. Magnetic starter. Recommended breaker: 20 amp. 12 amp.
IMPRESA #ad - This increases their efficiency and life expectancy. Wide range of compatibility: fits jet jwbs-14dxpro, & powermatic pwbs-14, jwbs14os, grizzly g0457 g0555 g0555p g0555x g0580 t21005 g1019 g1019z, jwbs-14cs, PWBS-14CS.
Any band saw that requires a 14" x 1" x 0095" tire. Increased productivity & efficiency: There's reduced down time with these durable & reliable 2 pack of band saw tires.
Jet #ad - Durability: robust stamped steel doors with welded steel pin hinges. In. Large work piece support: Deep table with a massive 360 sq. Of cast iron work surface.
Taytools #ad - This magnetic fence can be used on any bandsaw or drill press with a magnetic ferrous table. Specifications: 18” long by 3” tall, so it will work with most 10” to 18” bandsaws. Slots will accept 1/4-20 hex head bolts or Taytools 1/4” or 5/16” T bolts. One can be installed and used without installing an aftermarket bandsaw fence with guide rails and can be used on bandsaws where the blade slot exits to the front of saws that will not accept aftermarket fences.
Adjustable t fence allows the fence angle to be set to compensate for blade drift.
Comes standard with two 150-pound breakaway strength 90-degree switchable magnets Fence to table angle is calibrated to 90 degrees out of the box and will never need to be adjusted and fence is milled straight. Multiple t slots on fence will accept numerous stops, auxiliary fences, and jigs. It can be quickly and easily installed and removed from a bandsaw or drill press table by simply turning on/off the two magnet levers. One will not work on saws with cast or plastic tables.
POWERTEC #ad - Simple, effective cam lever action means device is securely locked in place. Arrives fully assembled, right out of the package. By using the handy adjustable cam, the clamp can adjust from 11-3/8-Inch up to 12-Inch.
1. Laguna Tools
#adBlack, Laguna Tools 220v 2.5hp Bandsaw with 12” Resaw and 38” Table Height, Model mband14bx220-250
#adMore information #ad
Blade width: 3/4" | pyramid-shaped spine. Part. 7degree table tilt left | 2 x 4" Dust ports | blade length: 115" | cast iron wheels. This is an o. Magnetic starter | dual light mount | 45Degree table tilt right max. Min. M. 12" resaw | height: 70 1/4" 21 1/2" x 16" | table height: 38". E.| Brand | Laguna Tools #ad |
| Manufacturer | Laguna Tools #ad |
| Height | 70.25 Inches |
| Length | 22.5 Inches |
| Weight | 260 Pounds |
| Width | 17.5 Inches |
| Part Number | mband14bx220-250 |
| Model | mband14bx220-250 |
| Warranty | New woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers' defective workmanship, parts and materials. |
More information #ad
2. Laguna Tools
#adLAGUNA TOOLS 18 In. Bandsaw 220 V 3 HP 16 I
#adMore information #ad
| Brand | Laguna Tools #ad |
| Manufacturer | LAGUNA TOOLS #ad |
| Height | 23.5 Inches |
| Length | 81 Inches |
| Weight | 440 Pounds |
| Width | 33.5 Inches |
| Part Number | MBAND18BX2203 |
| Model | MBAND18BX2203 |
| Warranty | 2 year manufacturer |
More information #ad
3. KREG
#adBlue, Kreg KMS7200 Bandsaw Fence
#adKREG #ad - Fits most 14-inch band saws for versatility. Adjustable in two dimensions for setting parallel with the blade. Easy to attach and remove for less downtime and more productivity.More information #ad
Precision lens cursor for pinpoint accuracy and dimensions-mounting rail is 26 inch660mm long, fence is 18 inch 457mm long. Incredibly strong and rigid for optimal durability and tighter workpieces.| Brand | KREG #ad |
| Manufacturer | Kreg #ad |
| Height | 8 Inches |
| Length | 2.5 Inches |
| Weight | 8.77 Pounds |
| Width | 32.25 Inches |
| Part Number | KMS7200 |
| Model | KMS7200 |
| Warranty | limited |
More information #ad
4. IMPRESA
#adFIts 14 inch x 1 inch x .095, 2 Pack Urethane Band Saw Tires, No Adhesive Needed, Compatible with Branded Bandsaws Including Jet Grizzly, & Powermatic
#adAny band saw that requires a 14" x 1" x 0095" tire. Increased productivity & efficiency: There's reduced down time with these durable & reliable 2 pack of band saw tires.
More information #ad
Won't dry out: urethane doesn't dry out when compared to plastic or rubber tires. The value 2 pack provides excellent value and quality. Long life: these band saw tires are superior to factory tires, or replacement rubber or plastic tires. No adhesive needed: easy to install & remove with no need for adhesive. The tires stretch to fit the wheel tightly.| Brand | IMPRESA #ad |
| Manufacturer | Impresa #ad |
| Part Number | 2Bandsaw14x1 |
More information #ad
5. Jet
#ad1-3/4HP, 14-Inch Woodworking Bandsaw, 1Ph 115/230V 714400K, JET JWBS-14SFX
#adMore information #ad
Dust collection efficiency: Dual 4” dust ports. Strength and rigidity: Oversized lower bearing bolt pattern. Accurate cuts: Larger, machined aluminum fence surface with easily visible measurements.| Brand | Jet #ad |
| Manufacturer | JET Tools #ad |
| Height | 37 Inches |
| Length | 75.5 Inches |
| Weight | 272 Pounds |
| Width | 27 Inches |
| Part Number | 714400K |
| Model | 714400K |
| Warranty | 5-Year |
More information #ad
6. Taytools
#adTaytools 388220 Magnetic Bandsaw and Drill Press Fence with Switchable Magnets 18-Inch-Long x 3-Inch-Tall Fence with Blade Drift Adjustment
#adAdjustable t fence allows the fence angle to be set to compensate for blade drift.
More information #ad
Using the t fence, the fence can be set to accommodate for blade drift. Magnets can be installed in one of four locations to accommodate for various bandsaw table sizes and additional magnets can be added up to four to increase holding power. Comes standard with two 150-pound breakaway strength 90-degree switchable magnets Fence to table angle is calibrated to 90 degrees out of the box and will never need to be adjusted and fence is milled straight. Multiple t slots on fence will accept numerous stops, auxiliary fences, and jigs. It can be quickly and easily installed and removed from a bandsaw or drill press table by simply turning on/off the two magnet levers. One will not work on saws with cast or plastic tables.
| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 4 Pounds |
| Width | 0 Inches |
| Part Number | 388220 |
| Model | 388220 |
More information #ad
7. RIKON Power Tools
#ad10-Inch, RIKON 10-305 Bandsaw With Fence
#adRIKON Power Tools #ad - Rip fence- a quality rip fence is now included. Solid steel design- the 10-305 is a scaled down version of the popular 10-345 and 10-325. Motor - 1/3hp motor provides ample power for cutting bowl and pen blanks. Frame is made of steel plate, stronger than plastic frames used by other manufactures.More information #ad
Cast iron table-large 13-3/4-inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size. Easily removed to do free hand work. Micro adjustable guide Post- Raise and lower the guide post height with the turn of a handle.| Brand | RIKON Power Tools #ad |
| Manufacturer | Rikon #ad |
| Height | 13 Inches |
| Length | 35.5 Inches |
| Width | 18 Inches |
| Part Number | 10-305 |
| Model | 10-305 |
| Warranty | 5 Year Warranty |
More information #ad
8. Carter
#adCARTER MAGFENCE II Universal Magnetic Fence
#adCarter #ad - Two powerful, switchable magnets for quick, precise adjustments. Easily removed to use with multiple equipment. 16" long, 3-1/2" tall l-shaped aluminum extrusion with multiple T-slots.More information #ad
Attaches magnetically for universal fit on most ferrous metal tables. Compatible with all MAGFENCE II accessories.| Brand | Carter #ad |
| Manufacturer | Carter Products #ad |
| Height | 3.5 Inches |
| Length | 16.3 Inches |
| Width | 3.5 Inches |
| Part Number | MFII |
More information #ad
9. POWERTEC
#adPOWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw and Similar Band Saws with a Work Table Size of 11-1/8” to 11-13/16”
#adMore information #ad
Sturdy extruded aluminum construction means it's solid and durable. Provides for straight parallel cuts. Hassle free to store and move about - weighing in at 13. 4 ounces.| Brand | POWERTEC #ad |
| Manufacturer | Southern Technology LLC #ad |
| Height | 2.1 Inches |
| Length | 12.2 Inches |
| Weight | 0.64 Pounds |
| Width | 4.2 Inches |
| Part Number | BS900RFA |
| Model | BS900RFA |
More information #ad
