Top 9 CHP Flush Cutter – Wire Cutters

As an Amazon Associate I earn from qualifying purchases.

1. Hakko

 #ad

Red, Hakko-CHP-170 Micro Cutter

#ad
Hakko #ad - 2. 5mm heat-treated carbon steel construction provides durability and long life. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. 21-degree.
BrandHakko #ad
ManufacturerQuality Hand Tools #ad
Height0.8 Inches
Length5.9 Inches
Weight0.04 Pounds
Width3.6 Inches
Part NumberCHP-170
ModelCHP-170

2. Hakko

 #ad

HRC 58, Wide Head, Hakko CHP TRR-58-G Macro Soft Wire Cutter, 21-Degree Angled Jaw, Flush Cut, 14mm Jaw Length, 3.0mm Hardened Carbon Steel Construction, 10 Gauge Maximum Cutting Capacity

#ad
Hakko #ad - Hrc 58-rated 3. 0mm heat-treated carbon steel construction provides durability and long life. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Dolphin-style nonslip hand grips provide comfort and control, curved fore-edge protects hands from cutting surfaces, and Parkerized surfaces prevent glare and increase corrosion resistance. Flush-cut medium soft-wire cutter has 14mm long jaw with angled head for cutting rubber seals and flush-cutting applications on copper and soft wire up to 10 gauge 2. 5mm. 21-degree angled cutting surface eases access in component-dense areas.
BrandHakko #ad
ManufacturerQuality Hand Tools #ad
Weight0 Pounds
Part NumberTRR-58-G
ModelTRR-58-G

3. Hakko USA / CHP

 #ad

Hakko CHP Micro Cutter, Clean Cut, 16 AWG 2 pack Original Version

#ad
Hakko USA / CHP #ad - Authentic chp product, by Hakko USA. Max cut: 16 awg, note: Max cut is determined with copper wire. Pack of 2 Micro Cutters. Cut type: Flush. Steel type: 2. 5 mm, rockwell Hardness RHC: 56.
BrandHakko USA / CHP #ad
ManufacturerHakko USA #ad
Part NumberCHP-170
ModelCHP-170

4. Hakko

 #ad

21-Degree Angled Jaw, 2.5mm Hardened Carbon Steel Construction, Hakko Micro Soft Wire Cutter, Flush Cut, 8mm Jaw Length, 1.5mm Stand-off, 16 Gauge Maximum Cutting Capacity 3-Pack

#ad
Hakko #ad - 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1. 5mm stand-off. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Drake off road tools 2. 5mm heat-treated carbon steel construction provides durability and long life. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.
BrandHakko #ad
ManufacturerDrake Off Road Tools #ad
Height1 inches
Length5.41 inches
Width4.5 inches
Part NumberDrake Off Road Tools
ModelDrake Off Road Tools

5. Hakko

 #ad

CHP-170 Micro Cutter 3 Pack

#ad
Hakko #ad - Drake off road tools 2. 5mm heat-treated carbon steel construction provides durability and long life. Flush-cut micro soft-wire cutter has 8 mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm chopper and soft wire. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. 21-degree.
BrandHakko #ad
ManufacturerHakko #ad
Part NumberCHP-170 3 Units
ModelCHP-170 3 Units

6. EURO TOOL

 #ad

C.h.p Milano Angled Flush Cutter, 5-1/4 Inches | PLR-489.00

#ad
EURO TOOL #ad - 6-1/4 inches 160 millimeter long. Made in Italy. Ideal for heavier cutting jobs and cutting small sprues. Return spring; high friction ergonomic grips; Maximum cut is 22 gauge copper wire. Made of high grade tool steel; Blackened non-glare head with a 48 degree angled head.
BrandEURO TOOL #ad
ManufacturerEurotool #ad
Height0.1 Inches
Length8.2 Inches
Weight0.12 Pounds
Width3.1 Inches
Part NumberPLR-489.00
ModelPLR-489.00

7. IRWIN

 #ad

4-1/2-inch 2078925, Diagonal, Flush Cut, IRWIN VISE-GRIP Pliers with Spring

#ad
IRWIN #ad - Nickel-chromium steel construction for overall strength and durability. Irwin vise-grip pliers provide high leverage for greater force at the jaw of the pliers. Protouch grips provide extra comfort and help reduce hand fatigue. Also works as a wire cutter. Induction-hardened cutting edge stays sharp longer.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height1 Inches
Length7.13 Inches
Weight0.23 Pounds
Width3.25 Inches
Part Number2078925
Model2078925
WarrantyFull Lifetime Guarantee - Each IRWIN hand tool is warranted to be free from defects in material and workmanship for the life of the tool under normal wear and tear, except for damage caused by misuse or alteration.

8. IGAN

 #ad

Blue, 5 Pack, Precision Electronic Model Sprue Wire Clippers Cutter, IGAN-330 Wire Flush Cutters

#ad
IGAN #ad - 3. Compact design: longer cutting jaws make flush cuts and fast cuts in tight spaces. 2. High hardness cr-v: made of heat-treated chrome vanadium steel with angled head, rockwell hardness 60C.

One of the strongest 5-inch flush cutter. The opening spring can help save force. 4. Comfortable grip: Ergonomically designed non-slip rubber handle for comfortable operation. 5. Ideal shear pliers for electronics, jewelry making, Zip ties, Plastic sprue cutters and more.1. Ultra sharp wire cutter: 13mm long upgraded jaw can achieve flush-cutting applications on up to 12 gauge 2. 0mm copper and soft wire. Each customer will get our worry-free 12-month warranty and friendly customer service.
BrandIGAN #ad
ManufacturerIGAN #ad

9. Miular

 #ad

4 Pack, Small Wire Cutters Flush Cutter, 5 Inch Flush Cut Pliers for Precision Cutting Crafting

#ad
Miular #ad - Flush-cutting applications on up to 20 gauge09mm copper and soft wire. Versatile hobby cutters: micro cutters can be used as a sprue cutters, zip tie cutter, wire snips, or guitar string cutter.

Easy to use: lightweight and returns spring design makes you more comfortable when cutting. High quality: the diagonal cutters are made of forged steel which is quite tough and very resistant to the common elements of wear and tear. These wire snips tip are heat-treated for durability and long life. Good performance: the flush cutter pliers has 10mm long jaw with 22 degree angled head for working in difficult to reach places. Package included: 4 pack Precision Flush Wire Cutters 5 Inches.
BrandMiular #ad
ManufacturerMiular #ad
Part NumberMiular-PN-2096