As an Amazon Associate I earn from qualifying purchases.

Of clamping force! Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.

Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading.


Mid-sized parallel clamp, rated at 900 lbs. Easily converts to spreader. Removeable end stop allows reversing the operating head to convert from compression force to spreading force.
18-inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp. Large and easy to turn wood handle. Parallel jaws are designed to clamp at a nominal 90° angle. Jaws clamp at accurate 90 degree angles. Of clamping force.



3-3/4-inch throat depth with 3 removeable jaws pads designed to protect material surfaces; 2 rail protector pads designed to keep clamped material from contacting rail surfaces; rail protector pads snap off when not needed.

1. Bessey
#ad
Bessey KREK2440 REVOlution Clamp Kit
#adBessey #ad - Kp blocks include molded mounting holes for easy attachment to a work surface when it is desired. Kp block set consists of; 4 molded fixtures designed for perfect clamping set ups of raised panel doors, frames or any square part glue up.More information #ad
6 piece set includes; 2 kre3524 24" clamps, 2 kre3540 40" and 1 four piece KP Framing Block set. Perfect 90 degree alignment of clamped components is easy with Bessel KP blocks. Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired not included.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 2 Inches |
Length | 47.63 Inches |
Weight | 12.5 Pounds |
Width | 5.75 Inches |
Part Number | KREK2440 |
Model | KREK2440 |
Warranty | Lifetime against manufactuirng defects |
More information #ad
2. Bessey
#ad
BESSEY KRE3531 PAIR 31" K Body REVO Parallel Bar Clamp Now With Hex Key Clamping
#adBessey #ad - Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping. Easily converts to spreader without tools! Two 2 31" kre3531 clamps: 31" of clamping capacity, a 10" to 36-1/2" spreading capacity, a 3-3/4" throat depth, and up to 1700 lbs.Of clamping force! Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
More information #ad
Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Weight | 0.01 Pounds |
Part Number | KRE3531 |
More information #ad
3. Bessey
#ad
Bessey KR3.550 50-Inch K Body REVO Fixed Jaw Parallel Clamp, 2-Pack
#adBessey #ad - 1, 500 lb clamping force, with ergonomic designed 2 component molded soft grip handle. Perfect parallel jaw design for, and mixed materials, plastics, general purpose clamping of wood, 90-Degree clamping of materials, composites, glue-ups of materials, light metals, can be attached to work surfaces using TK-6 clamps.Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading.
More information #ad
3-3/4-inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces. Cold drawn steel alloy rail with six serrated edges for secure, slip pro0f clamping, K Body REVO clamps sit flush on work surface for easy set ups. Rail protector pads snap off when not needed.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 3 Inches |
Length | 58.5 Inches |
Weight | 17 Pounds |
Width | 3 Inches |
Part Number | KR3.550 |
Model | KR3.550 |
Warranty | limited life time warranty |
More information #ad
4. Bessey
#ad
BESSEY KRE3550 PAIR 50" K Body REVO Parallel Bar Clamp Now With Hex Key Clamping
#adBessey #ad - Of clamping force! Two 2 50" kre3550 clamps: 50" of clamping capacity, a 10" to 52-1/2" spreading capacity, a 3-3/4" throat depth, and up to 1700 lbs. Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.More information #ad
Easily converts to spreader without tools! Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping. Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Weight | 0.01 Pounds |
Part Number | KRE3550 |
More information #ad
5. Bessey
#ad
Bessey KRJR18 K Body REVO JR, 18-Inch Parallel Clamp,Hammertone Grey
#adBessey #ad - High clamping force 900 lbs to weight 2. 8 lbs relationship for verstile clamping and light weight. Ideal for cabinetry or case work. Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn.Mid-sized parallel clamp, rated at 900 lbs. Easily converts to spreader. Removeable end stop allows reversing the operating head to convert from compression force to spreading force.
More information #ad
Large parallel clamping surface with replaceable protective jaw pads. Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact. 18-inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp. Large and easy to turn wood handle. Parallel jaws are designed to clamp at a nominal 90° angle. Jaws clamp at accurate 90 degree angles. Of clamping force.
Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 1.5 Inches |
Length | 23.5 Inches |
Weight | 3.2 Pounds |
Width | 5 Inches |
Part Number | KRJR-18 |
Model | KRJR-18 |
Warranty | lifetime |
More information #ad
6. Bessey
#ad
40 In., Parallel Clamp, K Body REVO Series, BESSEY KRE3540
#adBessey #ad - Ideal for cabinetry or case work. Many accessories and replacement parts available. Easily converts to spreader without tools. High strength, rated at 1700 lbs.More information #ad
6 mm hex socket on end of handle. Parallel jaws are designed to clamp at a nominal 90° angle. Of clamping force. German high-quality profiled steel rail stock.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 2 Inches |
Length | 47.63 Inches |
Weight | 7.69 Pounds |
Width | 5.75 Inches |
Part Number | KRE3540 |
Model | KRE3540 |
Warranty | Lifetime against manufacturing defects |
More information #ad
7. Bessey
#ad
Bessey K-Body REVO 6 Piece Set
#adBessey #ad - Cold drawn profile steel rail is made in Germany, assembled in USA. 2 pieces of kre3550 & KR3524 included. Perfect parallel clamping force with all of the K-Body REVO features. Pair of kbx20 extender included. Bessel k-body REVO set.More information #ad
Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 8.25 Inches |
Length | 60.5 Inches |
Weight | 12.5 Pounds |
Width | 11.25 Inches |
Part Number | KREX2450 |
Model | KREX2450 |
Warranty | Limited Lifetime |
More information #ad
8. Bessey
#ad
Bessey KR3.540 40-inch K Body REVO Fixed Jaw Parallel Clamp, 2-Pack
#adBessey #ad - Perfect parallel jaw design for, light metals, composites, 90-degree clamping of materials, general purpose clamping of wood, plastics, glue-ups of materials, and mixed materials--can be attahced to work surfaces using TK-6 clamps.3-3/4-inch throat depth with 3 removeable jaws pads designed to protect material surfaces; 2 rail protector pads designed to keep clamped material from contacting rail surfaces; rail protector pads snap off when not needed.
More information #ad
Cold drawn steel alloy rail with 6 serrated edges for secure, slip proof clamping, K Body REVO clamps sit flusch on work surface for easy set ups. Rapid action jaw opeing and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movabel jaw for spreading. 1, 500-pound clamping force, with ergonomic designed 2 component molded soft grip handle.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 2 Inches |
Length | 48 Inches |
Weight | 16 Pounds |
Width | 6.5 Inches |
Part Number | KR3.540 |
Model | KR3.540 |
Warranty | limited life time warranty |
More information #ad
9. Bessey
#ad
BESSEY KRE3512 REVOlution Parallel Clamp, 12"
#adBessey #ad - Ideal for cabinetry or case work. Easily converts to spreader without tools. German high-quality profiled steel rail stock. Of clamping force.More information #ad
High strength, rated at 1700 lbs. Many accessories and replacement parts available. 6 mm hex socket on end of handle. Parallel jaws are designed to clamp at a nominal 90° angle.Brand | Bessey #ad |
Manufacturer | Bessey #ad |
Height | 2 Inches |
Length | 18.5 Inches |
Weight | 4.86 Pounds |
Width | 5.75 Inches |
Part Number | KRE3512 |
Model | KRE3512 |
Warranty | Lifetime against manufacturing defects |
More information #ad