As an Amazon Associate I earn from qualifying purchases.
3M (TM) #ad - 100% made in the USA. Pressure sensitive Adhesive PSA with 3 mil high-strength polyester film backing. Aluminum Oxide AO abrasive material. 7 sheet bundle containing the following micron sizes. 3, 9, 3, 1, 12, 30 and 40. Sizes: 4-1/4" x 11".
Can be used wet or dry. Strong 3 mil film backing enhances abrasive durability and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments.
Taytools #ad - 5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets. This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes. 3. Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing.
These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing.
This aggressive polishing abrasive will cut up to twice as fast and last up to twice as long as aluminum oxide AO or silicon carbide SC films. Grades from. 1 to 30 micron have a 3 mil backing and grades 45 to 125 have a much thicker 5 mil backing.
These are psa pressure sensitive adhesive backed and have a thick 5 mil backing. This is one sheet 125 micron 120 grit 3M TM diamond lapping film 4 x 10 inches. The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper.
These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing. They are available in a wide range of precise micron grades from. 1 micron 100, 000 grit to 125 micron 120 grit to meet any sharpening or polishing need.
Taytools #ad - 1, 12, 5, 3, 30 and 40.5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets. This set contains two sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes.
Can also be used to put a fine polish on jewelry or gemstones.
3 micron white or 60, 12 micron yellow or 1200 grit, 5 micron brown or 4500 grit, 40 micron blue or 300 and 60 micron ivory or 250 grit.8. 5 inches x 11 inches Non-PSA Pressure Sensitive Adhesive backing.
1. 3M (TM)
#ad3M TM 7 Sheet 4-1/4 inch x 11 inch PSA Lapping Microfinishing Film For Scary Sharp Sharpening System Aluminum Oxide AO
#adMore information #ad
| Brand | 3M (TM) #ad |
| Manufacturer | 3M (TM) #ad |
| Height | 0.01 Inches |
| Length | 157.48 Inches |
| Width | 39.37 Inches |
| Part Number | 279175 |
| Model | 279175 |
More information #ad
2. Taytools
#ad3m TM Lapping Microfinishing Polishing Film 8.5 inches x 11 inches Aluminim Oxide AO Pressure Sensitive Adhesive PSA Backing 3 Mil Film Polymer Backing 1, 100 Micron / 120 Grit
#adTaytools #ad - Pressure sensitive adhesive PSA backing allows quick, flat attachment and clean removal for multi-step finishing processes.Can be used wet or dry. Strong 3 mil film backing enhances abrasive durability and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments.
More information #ad
Precision, paint, e-coat, wood, micron-graded aluminum oxide ao abrasive offers a fast cut rate and a superior, uniform finish on many substrates and is ideal for sanding plastics, composites and metal.8. 5 inch x 11 inch sheets may be easily cut and shaped per project requirements.| Brand | Taytools #ad |
| Manufacturer | 3M (TM) #ad |
More information #ad
3. Taytools
#adTaytool 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System
#adMore information #ad
Float glass will accommodate a half sheet of lapping film. 1, 5, 3, 12, 30 and 40. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Height | 2 Inches |
| Length | 14 Inches |
| Width | 6 Inches |
| Part Number | 279205 |
| Model | 279205 |
More information #ad
4. 3M (TM)
#ad3M TM Diamond Lapping Microfinishing Film 3 inches x 8 Inches PSA Pressure Sensitive Adhesive Backing 125 micron / 120 grit
#ad3M (TM) #ad - The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper. They are available in a wide range of precise micron grades from. 1 micron 100, 000 grit to 125 micron 120 grit to meet any sharpening or polishing need.These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing.
More information #ad
These are psa pressure sensitive adhesive backed. This super-fast cutting, long-lasting, consistent, but excel when used on harder materials such as hardened steel, close tolerance finishes, water resistant abrasive provides precise, carbide or gemstones. This aggressive polishing abrasive will cut up to twice as fast and last up to twice as long as aluminum oxide AO or silicon carbide SC films. Grades from. 1 to 30 micron have a 3 mil backing and grades 45 to 125 have a much thicker 5 mil backing.
| Brand | 3M (TM) #ad |
| Manufacturer | 3M (TM) #ad |
More information #ad
5. 3M (TM)
#ad3M TM 125 Micron 120 Grit Diamond Lapping Microfinishing Film 4-1/4 inches x 10-1/4 Inches PSA Pressure Sensitive Adhesive Backing
#ad3M (TM) #ad - This super-fast cutting, but excel when used on harder materials such as hardened steel, long-lasting, consistent, close tolerance finishes, water resistant abrasive provides precise, carbide or gemstones.These are psa pressure sensitive adhesive backed and have a thick 5 mil backing. This is one sheet 125 micron 120 grit 3M TM diamond lapping film 4 x 10 inches. The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper.
More information #ad
This aggressive polishing abrasive will cut up to twice as fast and last up to twice as long as aluminum oxide AO or silicon carbide SC films. These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing. They are available in a wide range of precise micron grades from. 1 micron 100, 000 grit to 125 micron 120 grit to meet any sharpening or polishing need.
| Brand | 3M (TM) #ad |
| Manufacturer | 3M (TM) #ad |
| Part Number | 773666 |
| Model | 773666 |
More information #ad
6. Taytools
#adTaytools 279199 Two Sheets 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System
#adMore information #ad
3. Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing. Float glass will accommodate a half sheet of lapping film. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Height | 2 Inches |
| Length | 14 Inches |
| Weight | 3 Pounds |
| Width | 6 Inches |
| Part Number | 279199 |
| Model | 279199 |
More information #ad
7. Imperial Microfinishing Film
#ad3M 0.3 Micron Microfinishing Lapping Film Sharpening 8 1/2" x 11" Sheet with PSA Backing
#adImperial Microfinishing Film #ad - 8 1/2" x 11" 03 micron microfinishing sheet. Very fine 03 micron aluminum oxide sheet is the equivalent of a 12000 grit waterstone. Sold in single sheets. Pressure sensitive adhesive backing.More information #ad
| Brand | Imperial Microfinishing Film #ad |
| Manufacturer | 3M #ad |
| Part Number | MSH-PN-19703043 |
More information #ad
8. Taytools
#ad30 and 40 microns Lapping Microfinishing Film Aluminum Oxide AO 8-1/2 x 11 Inches, 12, 3, 7 Sheet Variety Pack PSA Pressure Sensitive Adhesive .3, 1, 9
#adTaytools #ad - 7 sheet bundle containing the following micron sizes. 3, 5, 1, 12, 3, 30 and 40. Aluminum Oxide AO abrasive material. 100% made in the USA. Pressure sensitive Adhesive PSA. 3 mil high-strength polyester film backing.More information #ad
| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Part Number | 465449 |
| Model | 465449 |
More information #ad
9. Taytools
#ad10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron 500,000 Grit to 60 Micron 250 Grit 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing
#adTaytools #ad - Aluminum oxide ao abrasive material self-fractures in use to expose fresh cutting edges. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Available in a wide range of precise micron grades from 005 micron 500, 000 grit to 60 micron 250 grit to meet any sharpening or polishing need.Can also be used to put a fine polish on jewelry or gemstones.
More information #ad
3 mil high-strength water-resistent polymer film backing is less likely to tear than traditional wet or dry sandpaper. 10 piece set lapping microfinishing polishing film with the following grades: : 005 micron off-white or 500, 000 grit, 3 micron pink or 8, 000 grit, 9 micron light blue or 1800 grit, 30 micron green or 600 grit, 000 grit, 000 grit, 1 micron light green or 14, 0.33 micron white or 60, 12 micron yellow or 1200 grit, 5 micron brown or 4500 grit, 40 micron blue or 300 and 60 micron ivory or 250 grit.8. 5 inches x 11 inches Non-PSA Pressure Sensitive Adhesive backing.
| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Part Number | NONPSA-3M-9PIECE |
| Model | . |
More information #ad
