Top 9 0xa Wedge Type Quick Change Tool Post – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. LLDSIMEX

#ad

7PCs Set 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 9" OXA TOOL POST

#ad
LLDSIMEX #ad - Perfect for 7 x 10", 7 x 12", 7 x 14" mini lathe. 4, no. No time wasted with shims. 5. Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Tool post and tool holders no. Wedge type tool posts are precision engineered to assure repetitive accuracy. 7, no. 12pcs, no. 2, no.
BrandLLDSIMEX #ad
ManufacturerLLDSIMEX #ad
Part NumberLLDS-120-140

2. Toolly

#ad

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

#ad
Toolly #ad - Quickly and easily install on an engine, phase ii, or turret lathe for a wide range of operations. 2 boring turning & facing holder up to 1/2" tool capacity, No. 4 heavy duty boring holder 3/8" & 1/2" tool capacity,.

10 knurling, turning & Facing Holder up to 1/2" tool capacity. No. 7 universal parting blade holder 1/2" tool capacity, No. 0 wedge type tool post1. 75" l x 1. 75" w x 2. 5" h, no. Fully interchangeable with Aloris, Dorian, Yuasa, bench, and most other manufacturer components.11 turning & facing Holderup to 1/2" tool capacity,. No. Precision ground and hardened. Stud size is m10 and is perfect for most mini lathes, although modification may be needed for some machines a bushing or new center stud for a smaller hole may be necessary Slash Your Setup Time- instant changing from one operation to another. This set includes: no.
BrandToolly #ad
ManufacturerPuyi #ad
Height3.15 Inches
Length7.48 Inches
Width7.09 Inches

3. LLDSIMEX

#ad

0XA Wedge Type Quick Change Tool Post Set For Mini Lathe 6-9" SWING Steel Material

#ad
LLDSIMEX #ad - Tool post and tool holders no. 7, no. 4, no. 2, no. 1, no. Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Wedge type tool posts are precision engineered to assure repetitive accuracy. Perfect for 7 x 10", 7 x 12", 7 x 14" mini lathe. 10 No time wasted with shims.
BrandLLDSIMEX #ad
ManufacturerLLDSIMEX #ad
Weight4.64 Pounds
Part NumberLLDS-120-140

4. findmall

#ad

0XA Tool Post Set Wedge Type Quick Change Tool Post Set Steel Material For Mini Lathe 6-9" Swing

#ad
findmall #ad - Stud size is m10 and is perfect for most mini lathes, although modification may be needed for some machines a bushing or new center stud for a smaller hole may be necessary Slash Your Setup Time- instant changing from one operation to another.

Style 10: knurling, Turning, & Facing. Material - made of steel; All working parts precision ground and hardened. Style 2: boring turing & 1/2" tool capacity. Style 4: heavy duty boring holder 3/8" & Facing Holder up to 1/2" tool capacity. Product - wedge style quick Change Tool Post 6Pc, 250-000 Style 1: turning & tool holder. Style 7: universal parting Blade Holder 1/2" tool capacity. Design - rigid wedge tool post design, easily centered.
Brandfindmall #ad
Manufacturerfindmall #ad
Part NumberDoes Not Apply

5. LittleMachineShop.com

#ad

0XA Quick Change Tool Post Set for 9x20 Lathes

#ad
LittleMachineShop.com #ad - All steel construction. Includes mounting nut for 9x20 lathes. Quick change tool post set for 9x19 and 9x20 lathes. Includes five tool holders. 0xa, or series 000 size 60% of AXA size.
BrandLittleMachineShop.com #ad
ManufacturerLittleMachineShop.com #ad
Weight5 Pounds
Part Number4046
ModelLMS4046

6. LittleMachineShop.com

#ad

0XA Quick Change Tool Post Set, Horizontal Cut-Off

#ad
LittleMachineShop.com #ad - Includes five steel tool holders. Quick change tool post set for lathes with up to 8" swing. 0xa, or series 000 size 60% of AXA size. Fits all 7x10 to 7x16 mini lathes. Horizontal Cut-off tool holder.
BrandLittleMachineShop.com #ad
ManufacturerLittleMachineShop.com #ad
Weight4.87 Pounds
Part Number3112
ModelLMS3112

7. LittleMachineShop.com

#ad

0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe

#ad
LittleMachineShop.com #ad - 0xa, or series 000 size 60% of AXA size. Includes five tool holders. All steel construction. Fits 8x12, 8x14 lathes. Includes mounting stud and spacer for 8x12, 8x14 lathes.
BrandLittleMachineShop.com #ad
ManufacturerLittleMachineShop.com #ad
Weight5 Pounds
Part Number4083
ModelLMS4083

8. LLDSIMEX

#ad

AXA Wedge Type Quick Change Tool Post for Lathe 6-12"

#ad
LLDSIMEX #ad - Fully interchangeable with Aloris, Dorian, Phase II, Yuasa, and most other manufacturer components. Includes axa tool post with rigid wedge design, turning & boring holder with 3/16-1/2" capacity and groove for round tools; axa #4 boring bar holder holds 5/8" tool; axa #7 universal parting blade holder for use with 1/2" or smaller blades havind parallel top & facing holder with 3/16-1/2" capacity; axa #2 turning, easily centered; axa #1 turning & bottom; axa #10 knurling, facing & facing holder with two knurls.

Precision-engineered to assure repetitive accuracy.

Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations. The tool post comes with a blank T-Nut plate, the customers have to machine it according to the size of their own specific lathe T slot. For use on lathes with up to 12" swing defined as the diameter that can be turned over the bed.
BrandLLDSIMEX #ad
ManufacturerLLDSIMEX #ad
Part Number120-170
Model120-170

9. Accusize Industrial Tools

#ad

6 Pcs/Set, for Mini Lathe, Accusize Industrial Tools Oxa Wedge Type Quick Change Tool Post, for Lathe Swing 6'', 9'', 0251-0000

#ad
Accusize Industrial Tools #ad - Wedge type tool posts are precision engineered to assure repeatability accuracy. Made of steel. Whole set includes one of each: 0250-0000 wedge type tool post; 0250-0001 turning tool holder; 0250-0002 boring, can use two size boring bars 3/8" & 1/2"; 0250-0007 Parting Blade Tool Holder, turning tool holder; 0250-0004 heavy duty Boring Bar Holder, use 1/2" high parting blades; 0250-0010 Knurling and Turning Tool Holder.

The tool post comes with a blank t-Nut plate, customers need to do some machining work to make it fit into their own specific lathe T- slot. Made from high quality, heat treated tool steel. All working parts hardened and precision ground. Wedge type tool posts have the Maximum rigidity to get the chatter free performance. Perfect for 7 x 10", 7 x 14" mini lathe, grizzly, little machine, such as Enco, 7 x 12", Harbor Freight and many other brand.
BrandAccusize Industrial Tools #ad
ManufacturerAccusize Co., Ltd. #ad
Height9.84 Inches
Length3.15 Inches
Weight2.85 Kilograms
Width4.53 Inches
Part Number0251-0000
Model0251-0000