As an Amazon Associate I earn from qualifying purchases.
Peachtree Woodworking Supply #ad - Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert. You can also use zero clearance inserts with dado blade sets. Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts.
This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. Since every table saw brand and manufacturer is different, width and thickness of your table saw insert or opening and compare it to the size we list.
Zero clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement! Zero clearance inserts are table saw specific. Measure your factory insert and compare size before you order.
Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering.
Metabo HPT #ad - X 2 in. Easy adjustments: blade height or angle, as well as simple fence adjustments to adhere to the cutting material. Includes: table saw, blade guard, wrenches, push stick, 10-Inch 40-Tooth Carbide Tipped Blade, Kickback, rip fence and miter gauge Assemblies, Outfeed Support.
Blade: 10 in. 40t carbide tipped blade: offers high cutting capacity. Cut at 90 degrees and 2-1/4 In.
X 22 in. Motor: powerful 15 amp motor with 4, 500 RPM for tackling the toughest cutting applications. 0° to 2-1/4 In. Stand: stable and durable fold and roll stand for easy set up and breakdown, providing stability while in use. Bevel: 0° to 45°: for cuts ranging from 3-1/8 In. Table capacity: 35-in to the right and. For easy and stable material support.
Bosch #ad - Use for precision cuts at 90-degrees and reduces kerf clearance to a thickness of blade. Package dimensions : 13. 7 l x 07 h x 3. 7 w inches. Package weight : 03 pounds. Made in Taiwan.
1. Leecraft
#adHitachi Zero Clearance InsertColor May Vary
#adLeecraft #ad - Eliminates dangerous gap around blade where thin off-cuts can get wedged. Measures: 15-1/8" x 3-3/4" x 1/8" Please measure before ordering. Installation instructions included.More information #ad
Fits: hitachi: c10fl, c10la, porter cable: pcb270ts doES NOT FIT: C10RJ. Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering.| Brand | Leecraft #ad |
| Manufacturer | LEECRAFT #ad |
| Height | 0.9 Inches |
| Length | 15.1 Inches |
| Weight | 1.03 Pounds |
| Width | 4.85 Inches |
| Part Number | 1204058 |
More information #ad
2. Peachtree Woodworking Supply
#adPhenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening
#adThis zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. Since every table saw brand and manufacturer is different, width and thickness of your table saw insert or opening and compare it to the size we list.
More information #ad
The opening is more like a custom slot cut to the exact width of your table saw blade. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. Zero clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement! Zero clearance inserts are table saw specific. Measure your factory insert and compare size before you order.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Fulton #ad |
| Weight | 1.23 Pounds |
| Part Number | AMZ-4133 |
| Model | 4133 |
More information #ad
3. Hitachi
#adHitachi 371468 Soft Start C10Rj Part
#adHitachi #ad - For use on Hitachi power tool products. Hitachi power tool replacement part. Hitachi 371468 soft start c10rJ Replacement Part. Same great tools, with only a new name. Hitachi power tools has renamed to Metabo HPT.More information #ad
| Brand | Hitachi #ad |
| Manufacturer | Koki Holdings America, Ltd #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 371468 |
| Model | 371468 |
More information #ad
4. Leecraft
#adLeecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Colors may Vary
#adLeecraft #ad - Fits: delta: unisaw & left-tilt unisaw, 35610, 35670, sears craftsman 22104, steel city 35605, 10" tilt arbor saw, 22124, 22114, 35680, Jet CTAS-10, 10" contractor, bridgewood bw10ts, grizzly g1023, 35675, Powermatic 63, "hybrid" & left-tilt Contractor, 35685.Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering.
More information #ad
Measures: 13-3/8" x 3-3/4" x 1/2" Please measure before ordering. Elimantes dangerous gap around blade where thin off-cuts can get wedged. Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts.| Brand | Leecraft #ad |
| Manufacturer | Leecraft #ad |
| Height | 3 Inches |
| Length | 8 Inches |
| Width | 3 Inches |
| Part Number | DL-1U |
| Model | DL-1U |
More information #ad
5. Leecraft
#adLeecraft DW-1 Zero-Clearance Insert for Dewalt Fixed Miter Saws Colors May Vary
#adLeecraft #ad - Dimensions: 10" x 2-5/8" x 1/4". Fits dewalt 10" and 12" miter saws. Zero clearance blade insert with durable phenolic construction. Coated surface for friction free operation.More information #ad
| Brand | Leecraft #ad |
| Manufacturer | Leecraft #ad |
| Height | 2 Inches |
| Length | 10 Inches |
| Weight | 0.02 Pounds |
| Width | 5 Inches |
| Part Number | DW-1 |
| Model | DW-1 |
More information #ad
6. Metabo HPT
#adMetabo HPT Table Saw | 10-Inch Blade | 35-Inch Rip Capacity | Fold & Roll Stand | 8 x 13/16-Inch Dado Capacity | C10RJS
#adBlade: 10 in. 40t carbide tipped blade: offers high cutting capacity. Cut at 90 degrees and 2-1/4 In.
More information #ad
Cut capacity: capable of a 3-1/8 in. Table size: 28-3/4 in. 45°. Cut at 45 degrees. Technology: Featuring soft star and electric brake. Working table size: with out feed support of 28-3/4 In. X 22 in. Motor: powerful 15 amp motor with 4, 500 RPM for tackling the toughest cutting applications. 0° to 2-1/4 In. Stand: stable and durable fold and roll stand for easy set up and breakdown, providing stability while in use. Bevel: 0° to 45°: for cuts ranging from 3-1/8 In. Table capacity: 35-in to the right and. For easy and stable material support.
| Brand | Metabo HPT #ad |
| Manufacturer | Koki Holdings America, Ltd #ad |
| Height | 36 Inches |
| Length | 28.75 Inches |
| Weight | 96 Pounds |
| Width | 22 Inches |
| Part Number | C10RJSM |
| Model | C10RJS |
| Warranty | 2 Year |
More information #ad
7. Metabo HPT
#adHitachi 371449 Overload Protection
#adMetabo HPT #ad - Hitachi power tools has renamed to Metabo HPT. Hitachi 371449 overload protection C10RJ. For use on Hitachi power tool products. Same great tools, with only a new name. Genuine Hitachi power tool replacement part.More information #ad
| Brand | Metabo HPT #ad |
| Manufacturer | Koki Holdings America, Ltd #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.05 Pounds |
| Width | 1 Inches |
| Part Number | 371449 |
| Model | 371449 |
More information #ad
8. Bosch
#adRed, BOSCH TS1005 Zero Clearance Insert Assembly
#adMore information #ad
| Brand | Bosch #ad |
| Manufacturer | Bosch #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.25 Pounds |
| Width | 0 Inches |
| Part Number | TS1005 |
| Model | TS1005 |
| Warranty | 1 year manufacturer warranty, 30 day money back guarantee |
More information #ad
