Top 8 UpCut Spiral Router Bit 1/2 – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving, SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank

#ad
SpeTool #ad - The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPL-D1/2-1/2-U

2. SpeTool

#ad

1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools, SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank

#ad
SpeTool #ad - Solid carbide up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Industrial quality control to ensure best performance. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-U

3. EANOSIC

#ad

Extra Long 4 inch, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving, 1/2” Cutting Diameter, EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, 2” Cutting Length

#ad
EANOSIC #ad - End mill bits can smoothly upcut groove and slots, better than straight bits. Spiral bits used for side milling, finish machining, mortises, Cycles and dados with clean edge and bottom, end milling, etc.

The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp. The router bit suit for CNC router and any plunge routers with 1/2" collet. Premium quality: the spiral upcut router bits Made of solid carbide Tungsten steel, it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time. Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length. And also for carbon steel, soft alloy steel, tool steel, cast iron, OAK, MDF, aluminum alloy.
BrandEANOSIC #ad
ManufacturerEANOSIC #ad
Part NumberTungsten steel-4 inch

4. Freud

#ad

Freud 3/8" Dia. Solid Carbide Up Spiral Bit with 1/2" Shank 75-106,Silver

#ad
Freud #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Overall dia. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 3/8", 2 flutes, cutting length h 1-1/4", 1/2" Shank. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.15 Pounds
Width1 Inches
Part Number75-106
Model75-106

5. MLCS

#ad

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

#ad
MLCS #ad - 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. Solid micro grain carbide cuts smooth and stays sharp. Perfect for deep mortises and cutting dadoes in a router table. 1/4-inch and 1/2-Inch shanks. Remove sawdust and wood chips from plunge cuts with upward shearing.
BrandMLCS #ad
ManufacturerMLCS #ad
Part Number200
Model200

6. SILIVN

#ad

SILIVN Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank, 1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving

#ad
SILIVN #ad - The industrial quality route bit is perfect for CNC router tables, hand-held, table-mounted portable routers with 1/2” collet. Guarantee service, 100% satisfaction guarantee and reliable customer service within a 24 hour time support, 30 day back money guarantee - 12 month warranty.

The solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp.
BrandSILIVN #ad
ManufacturerSILIVN #ad

7. SpeTool

#ad

1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, Carving

#ad
SpeTool #ad - The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-3/8-1/2-U

8. Whiteside Router Bits

#ad

Down Cut Solid Carbide 1/2-Inch Cutting Diameter and 2-Inch Cutting Length, Whiteside Router Bits RD5200T Three Flute with Spiral Bit

#ad
Whiteside Router Bits #ad - Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height6 Inches
Length3 Inches
Width4.5 Inches
Part NumberRD5200T
ModelRD5200T