Top 8 Upcut Spiral Router Bit 1/2 Shank 3/8 – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

#adSpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	SP-3/8-1/2-U

2. SpeTool

#ad

1/2 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving, SpeTool Spiral Downcut Router Bits with 3/8 inch Cutting Diameter

#adSpeTool #ad - Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Industrial quality control to ensure best performance. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits.

Brand	SpeTool #ad
Manufacturer	spetool #ad
Part Number	SP-D3/8-1/2-D

3. Freud

#ad

Freud 75-106: 3/8" Dia. Up Spiral Bit

#adFreud #ad - Freud premier Solid Carbide. Specs: number of cutters 2, overall length 3", overall Dia. Covered by Freud's limited lifetime warranty. Use in cnc, hand-held and table-mounted routers. Fast chip removal with excellent quality and long life. Kickback reducing design. 1/2", carbide height 1-1/4". Individually computer balanced. 3/8", shank Dia. Precision ground for the smoothest cuts.

Brand	Freud #ad
Manufacturer	Freud #ad
Height	1 Inches
Length	1 Inches
Weight	0.15 Pounds
Width	1 Inches
Part Number	75-106
Model	75-106
Warranty	Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4494

4. MLCS

#ad

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

#adMLCS #ad - Remove sawdust and wood chips from plunge cuts with upward shearing. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. Perfect for deep mortises and cutting dadoes in a router table. 1/4-inch and 1/2-Inch shanks. Solid micro grain carbide cuts smooth and stays sharp.

Brand	MLCS #ad
Manufacturer	MLCS #ad
Part Number	200
Model	200

5. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 4 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Small Cut

#adSpeTool #ad - The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 1-3/4 inch cutting length, 4 inch for total length. Industrial quality control to ensure best performance.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	W04010
Model	W04010

6. Amana Tool

#ad

Amana Tool HSS1642 Double Flute Spiral Router Bits Metal Aluminum Cutting 3/8 Dia x 1 x 1/2 Inch Shank Up-Cut Router Bit High Speed Steel

#adAmana Tool #ad - Superior quality – high speed steel Aluminum/non-ferrous metal router bits for cutting edge quality and performance. Industrial-quality tools – amana tool is a worldwide leading tool provider with a USA-based Corporate headquarters, specializing in industrial-quality, cutting tools.

Up-cut router bit – the up cut router bits are designed for aluminum cutting. Smooth finishes – double flute router bits provide a smooth finish when grooving and slotting than the single flute router bits. For aluminum cutting – use the aluminum cutting bit for cutting Fomex with Aluminum Face, Block and Plate Aluminum, Aluminum 5052, Sheet, and Wood. Available in single and double flute.

Brand	Amana Tool #ad
Manufacturer	Amana #ad
Weight	0 Pounds
Part Number	HSS1642

7. Yonico

#ad

Yonico Upcut Router Bits Spiral 2 Flute Solid Carbide CNC End Mill 3/8-Inch Dia. 1/2-Inch Shank 31251-SC

#adYonico #ad - For use on cnc, table mount and handheld routers. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. Polished to a mirror finish from a solid carbide rod for precision & accuracy. Used for: standard milling, dadoing, and boring. For standard cnc milling and routing where material removal and efficiency is required.

Brand	Yonico #ad
Manufacturer	Yonico #ad
Height	0.38 Inches
Length	3 Inches
Weight	0.31 Pounds
Width	0.38 Inches
Part Number	31251-SC
Model	31251-SC
Warranty	Limited Lifetime Warranty

8. Freud

#ad

Multi, One Size, Freud-Diablo 3/8" Dia. Down Spiral Bit with 1/2" Shank 76-106

#adFreud #ad - Country of origin :Italy. Product type :drILL BITS. Package dimensions :14. 48 cm l x 5. 33 cm w x 1. 52 cm H. Package weight :1. 0lbs.

Brand	Freud #ad
Manufacturer	Freud #ad
Height	1 Inches
Length	1 Inches
Weight	0.15 Pounds
Width	1 Inches
Part Number	76-106
Model	76-106
Warranty	Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4242