Top 8 Simpson Strong Tie Screws – Wood Screws

As an Amazon Associate I earn from qualifying purchases.

1. Simpson Strong-Tie

#ad

Simpson Strong-Tie SDWS22312DBB-R50 3-1/2" x .220" Outdoor Accents Structural Wood Screw

#ad
Simpson Strong-Tie #ad - Black powder coat, double-barrier coating for additional corrosion protection. 2 in thread length. Under head nibs offer greater control when seating the head. Bold thread Design. Quantity: 50-per box.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson Strong-Tie #ad
Height2.99 Inches
Length7.28 Inches
Width3.82 Inches
Part NumberSDWS22312DBB-R50
Model5005069

2. Simpson Strong-Tie

#ad

SIMPSON STRONG TIE SD8X1.25-R 100 5/32X1-1/4 WD Screw

#ad
Simpson Strong-Tie #ad - Primary use: Wood to Wood. Wafer head. Deep philips drive resists cam-out. Serrated threads for easier driving.
BrandSimpson Strong-Tie #ad
ManufacturerSIMPSON STRONG TIE #ad
Height5 Inches
Length2 Inches
Width3 Inches
Part NumberSD8X1.25-R
ModelSD8X1.25-R

3. Simpson Strong-Tie

#ad

Simpson Strong Tie S10350WPB DWP #10 3-1/2" 305 Stainless Steel Flat T25 Screw 1000 Piece

#ad
Simpson Strong-Tie #ad - 6-lobe drive helps prevent driver-bit cam-out, resulting in easier driving and longer bit life. Designed to allow you to drive more screws on a single battery charge. Unique box thread design with raised-ridge technology greatly reduces driving torque. Specially designed sharp point penetrates hard wood products with ease. Quantity: 1, 000-pieces.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson Strong Tie #ad
Height10.25 Inches
Length9.5 Inches
Width8 Inches
Part NumberS10350WPB
ModelS10350WPB

4. Simpson Strong-Tie

#ad

Simpson Strong-Tie SDWS22500DB-R50 5" x .220 Timber Screws Exterior Grade 50ct

#ad
Simpson Strong-Tie #ad - Bold thread design provides superior holding power and cInches fastened members together for consistent installation. Tan double barrier double coating for exterior applications, Imported. Type t-40 bit required with deep 6-lobe recess to prevent cam-out. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Low-profile heads allow hardware installation to be virtually flush.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson Strong-Tie #ad
Height2.9 Inches
Length6.8 Inches
Width3.9 Inches
Part NumberSDWS22500DB-R50
ModelHT-20B

5. Simpson Strong-Tie

#ad

Simpson Strong-Tie SD9112R100 #9 x 1-1/2" Structural Screw 100ct

#ad
Simpson Strong-Tie #ad - Tested and approved for use in many of our best-selling connectors for both interior and exterior applications. Patented serrated threads and sharp point make driving easy. 9 x 1. 5". Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors. Ideal for use in connector applications where more control is desired or using a hammer is inconvenient.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson Strong-Tie #ad
Height4 Inches
Length2 Inches
Width4 Inches
Part NumberSD9112R100
ModelSD9112R100

6. Simpson Strong-Tie

#ad

Simpson Strong-Tie SD10112DBBR50 1-1/2" x #10 Outdoor Accents Connector Screw 50ct

#ad
Simpson Strong-Tie #ad - Quantity: 50-per box. Size: #10 x 1-1/2 in. 1/4 in hex head reduces cam-out for easier installation and helps avoid stripping of the head. Use with outdoor accents Connectors sold separately for a decorative look. Mechanical galvanized with black powder coat.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson Strong-Tie #ad
Height1.6 Inches
Length4.75 Inches
Width3.15 Inches
Part NumberSD10112DBBR50
ModelSD10112DBBR50

7. Simpson Strong-Tie

#ad

Simpson Strong-Tie SD10112R100 #10 x 1-1/2" Structural Screw 100ct

#ad
Simpson Strong-Tie #ad - Mechanically-galvanized coating meets ASTM B695 class 55. 1/4-inch hex head drive reduces cam-out for easier installation. Optimized heat treated for strength. Connectors installed with sd screw code listed under ICC-ES ESR-3096, Imported. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors.
BrandSimpson Strong-Tie #ad
ManufacturerSimpson Strong-Tie #ad
Height2.1 Inches
Length3.9 Inches
Weight1 Pounds
Width3.1 Inches
Part NumberSD10112R100
ModelSD10112R100

8. Simpson Strong-Tie

#ad

Simpson Strong-Tie SD9212R100#9x2.5 Conn Screw

#ad
Simpson Strong-Tie #ad - Brand name: Simpson Strong-Tie. Item dimensions: 2. 0"l x 3. 88"w x 3. 13"h. Country of Origin: United States. Item weight: 1. 0 lb.
BrandSimpson Strong-Tie #ad
ManufacturerSIMPSON STRONG TIE #ad
Height3.13 Inches
Length2 Inches
Width3.88 Inches
Part NumberSD9212R100
ModelSD9212R100