Top 10 Toilet Flange Extender Kit – Faucet Flanges

As an Amazon Associate I earn from qualifying purchases.

1. Set-Rite Products

#ad

OATEY Toilet Flange Extension Kit, corrects flange elevations ranging from 1/4" to 1-5/8"

#ad
Set-Rite Products #ad - Designed to snap-in-half, allowing you to slide the spacer underneath your raised toilet flange ring and support your toilet bolts. Also used as a layout tool for installing new toilet flanges. Made of durable plastic. Set-rite can be used on existing PVC, ABS, Cast Iron and Stainless Steel ringed flanges". Extends from 1/4 to 1-5/8 to finished Floor. Will work for any new installation or repair on an existing toilet flange. Use spacers on top of your existing flange ".
BrandSet-Rite Products #ad
Manufactureroatey #ad
Height4 Inches
Length7.25 Inches
Weight1 Pounds
Width7.25 Inches
Part Number43400
Model43400

2. Danco

#ad

NEXT BY DANCO All-in-One Toilet Installation Kit | Perfect Seal Wax Ring & Zero Cut Bolts | Toilet Repair | Wax-Free | Mounting Toilet Bolts 10879X

#ad
Danco #ad - Works with flanges that are 1/2 inch above the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations. Repositioning capability: both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation.

No mess: perfect seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings. No cutting required: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The sliding adapters tighten the bolts and the low-profile caps featuer an easy lock and release mechanism. Helpful tip: when toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed.
BrandDanco #ad
ManufacturerNext by Danco #ad
Height2.5 Inches
Length1.61 Inches
Weight0.65 Pounds
Width1.61 Inches
Part Number10879X
Model10879
WarrantyLimited 1 Year

3. Oatey

#ad

Oatey 43645 Closet Flange Spacer Kit, 1/2-Inch

#ad
Oatey #ad - Includes closet bolts and shims. Four mounting slots for proper fit and alignment of closet bolts to the toilet. 3-inch spigot closet flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting. Provides hassle-free use. Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor. For use overlaying, replacing or tiling bathroom floors. 4-inch spigot closet flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
BrandOatey #ad
ManufacturerOatey #ad
Height8 Inches
Length11 Inches
Weight0.2 Pounds
Width9 Inches
Part Number43645
Model43645
Warranty1-year limited

4. Sioux Chief

#ad

Sioux Chief Closet Flange Push-Tite Pvc 3"

#ad
Sioux Chief #ad - The package width of the product is 17. 9 inches. Country of origin: uNITED STATES. The package length of the product is 106 inches. The package height of the product is 22. 4 inches.
BrandSioux Chief #ad
ManufacturerSioux Chief #ad
Height7 Inches
Length4 Inches
Weight0.8 Pounds
Width7 Inches
Part Number888-GPM
Modeln/a

5. Coflex

#ad

Flexon Toilet Flange for 4" PVC, Cast Iron or Lead Pipes-Includes Spacer System to Correct Flange Elevation from 3/8"-1 1/8", ABS

#ad
Coflex #ad - Also see video at bottom of detail page. 4" of clear ID in pipe needed. New waxless toilet flange and spacer system for any NEW installation or REPAIR on 4" ID pipes.

See diagram A. Inward lip forms a seal directly to the toilet horn, NO WAX NEEDED. 1 1/8" height difference. Certified in the united states with nsf. Flexible sleeve seals to the inside of the pipe. Kit includes: 1 flexible flange 8 spacers 2 brass bolts 4 304 SS Screws, washers and nuts, and a TOILET SEAL GAUGE to verify a seal is made before setting the toilet. Pipe must have a clear 4" ID". Optional use of spacers- adjust the height of the flange if needed- from min. 3/8" to max. For flange repairs-see diagram b for installing over an existing flange.
BrandCoflex #ad
ManufacturerCoflex #ad
Weight1 Pounds

6. Oatey

#ad

1/4-Inch, Oatey 43519 Flange Nuts, White

#ad
Oatey #ad - Easy installation and easy handling. No need to tear up existing floor. Installs easily without tools. Replaces broken cast iron closet flanges. The product is manufactured in China. Smooth unrestricted flow design. The product is highly durable and easy to use.
BrandOatey #ad
ManufacturerOatey #ad
Height1 Inches
Length7 Inches
Weight0.19 Pounds
Width7 Inches
Part Number43519
Model43519
Warranty1-year limited

7. Oatey

#ad

4-Inch,Black, Oatey 43538 ABS Cast Iron Flange Replacement

#ad
Oatey #ad - No need to tear up existing floor. 3"" stainless steel bolts are tightened from the finished floor. No caulking required. Smooth unrestricted flow design. Compression joint allows up to 3"" of adjustment to the riser. Replaces broken cast iron closet flanges. Slides inside of 4"" cast iron or Schedule 40 DWV plastic pipe. Installs easily without tools.
BrandOatey #ad
ManufacturerOatey #ad
Height5 Inches
Length12.99 Inches
Weight1.5 Pounds
Width7.99 Inches
Part Number43538
Model43538
Warranty1-year limited

8. 3D Plumbing Products

#ad

Toilet Flange Repair Kit, Works on 3" or 4" Cast Iron, PVC or ABS Toilet Flanges with Broken Bolt Rails

#ad
3D Plumbing Products #ad - Search youTube for our installation videos. Designed by a plumber for plumbers or diY'ers so you don't have to replace the whole flange. Broken flange must be completely free of trash or debris around and under broken flange.

Putty knife works best. Repair broken bolt rails on a 3" or 4" cast iron, pvc or abs solid toilet flanges. Super strong aluminum alloy that will not rust or corrode. Will not work on PVC with metal outer ring. For proper installation you must have 3/8" clearance between flange and flooring. Do not hit with hammer! Use rubber mallet if needed. Split ring design. Can be installed in minutes once existing flange is cleaned and prepped. Does not restrict flow of existing pipe.
Brand3D Plumbing Products #ad
Manufacturer3D Plumbing Products #ad
Weight1 Pounds
Part Number3DTFR1

9. SANI SEAL

#ad

Sani Seal Llc BL01 Waxless Toilet Gasket

#ad
SANI SEAL #ad - Country of Origin: United States. Item dimensions: 2. 0"l x 8. 0"w x 9. 0"h. Brand name: saNI SEAL. Item weight: 05 lb.
BrandSANI SEAL #ad
ManufacturerSANI SEAL #ad
Height9 Inches
Length2 Inches
Weight0.4 Pounds
Width8 Inches
Part NumberBL01
ModelBL01

10. Canplas

#ad

3-Inch, Canplas 193617SS DWV Closet Flange with Stainless Steel Ring and Extended Spigot, White

#ad
Canplas #ad - Country of Origin: China. Injection molded body in non-toxic durable white polyvinyl chloride PVC. Normally used in the drainage portion of the DWV system only. Adjustable metal ring for added streangth.
BrandCanplas #ad
ManufacturerCanplas #ad
Height4.56 Inches
Length7.03 Inches
Weight1.1 Pounds
Width7.03 Inches
Part Number193617SS
Model193617SS