Top 10 Threaded Rod Cutter – Power Tools

As an Amazon Associate I earn from qualifying purchases.

1. MILWAUKEE'S

#ad

Milwaukee Tools M18 Brushless Threaded Rod Screw Cutter 2872-20

#ad
MILWAUKEE'S #ad - Centered grip optimized for One-Handed Overhead Operation. Delivers 400+ cuts on 3/8" mild steel Per Charge with a M18 2. 0ah Battery. Four sided rotatable cutting dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool. Cuts 1/4", 3/8" & 1/2" mild steel, 1/4" & 3/8" stainless Steel, Coarse Threaded Rod. Delivers clean, burr-Free Cuts for Threading Nuts on by Hand.
BrandMILWAUKEE'S #ad
ManufacturerMilwaukee #ad

2. DEWALT

#ad

Cordless DCS350D1, DEWALT 20V MAX Threaded Rod Cutter

#ad
DEWALT #ad - Able to cut 1/4", 1/2" mild steel course threaded rod, 3/8", and 1/4", 3/8" stainless steel Course threaded rod. Bright led work light to illuminate cutting area. Onboard cutter wrench storage. Rotating cutter allows you to cut multiple sizes of rod with one cutter. Clean, bur free cuts allowing for easy threading.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height7 Inches
Length13 Inches
Weight9 Pounds
Width6 Inches
Part NumberDCS350D1
ModelDCS350D1
Warranty3 year limited warranty

3. DEWALT

#ad

DEWALT DCS350B 20V MAX Cordless Threaded Rod Cutter Tool Only

#ad
DEWALT #ad - Battery & Charger Sold Separately. Rotating cutter allows you to cut multiple sizes of rod with one cutter. Clean, bur free cuts allowing for easy threading. Bright led work light to illuminate cutting area. Able to cut 1/4", 3/8", and 1/4", 1/2" mild steel Course threaded rod, 3/8" stainless steel Course threaded rod. Onboard cutter wrench storage.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height7 Inches
Length13 Inches
Weight9 Pounds
Width6 Inches
Part NumberDCS350B
ModelDCS350B
Warranty3 year limited warranty

4. Makita

#ad

Tool Only, Makita XCS03Z 18V LXT Threaded Rod Cutter

#ad
Makita #ad - Performs up to 1, 300 cuts of 3/8” mild steel threaded rod and 1, 200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5. 0ah battery. Compact design at only 7-7/8" Long and weighs only 7 lbs. Spark-free cutting for clean, burr-free cuts allowing for easy threading. Ideal for overhead cutting of installed threaded rod including 1/4" And 3/8" Course thread diameter sizes. Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue. With battery battery not included.
BrandMakita #ad
ManufacturerMakita #ad
Height9.45 Inches
Length5.04 Inches
Width11.97 Inches
Part NumberXCS03Z
ModelXCS03Z

5. Berkley Tool

#ad

Berkley Tool BT-50375 3/8-Inch Threaded Rod Cutter

#ad
Berkley Tool #ad - No additional cleaning after cutting. Replaceable cutting jaws. Cuts 3/8-inch threaded rod clean. Berkley tool covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
BrandBerkley Tool #ad
ManufacturerFlorida Pneumatic #ad
Part NumberBT-50375
ModelBT-50375
WarrantyLifetime warranty against defects in material or workmanship for the life of the tool

6. Happybuy

#ad

Happybuy 3/8inch Threaded Rod Cutter Handle Tool with 30inch Handle fits REED TRCD3/8 04767 Dies For Cutting Low Carbon Steel Threaded Rod

#ad
Happybuy #ad - Precise cutting- for cutting carbon steel threaded rods with a cut diameter range of 10 mm or less, it provides precise cutting and eliminates threaded end grinding.

Wide application- commonly used on construction sites to secure pipe, conduit, duct work, and other construction elements. Ergonomic handle - 30-inch handle, the design is more labor-saving, the rubber handle increases the friction, and the anti-skid is not easy to fall off. High efficiency- with the center cutting method, the mold is designed to protect the threaded rod from damage when it is cut. High efficiency, low loss, and material saving. Sharp jaw- alloy steel cutting edge, through the numerical control heat treatment process, strengthens the toughness and strength of the jaws, and is faster and more convenient to use.
BrandHappybuy #ad
ManufacturerHappybuy #ad

7. Makita

#ad

Tool Only, Makita CS01Z 12V max CXT Lithium-Ion Brushless Cordless Threaded Rod Cutter

#ad
Makita #ad - With battery battery not included. 2 lbs. Ideal for overhead cutting of installed threaded rod including 1/4" and 3/8" coarse thread diameter sizes. Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut. Up to 700 cuts of 3/8” mild steel and 550 cuts of 3/8” stainless steel threaded rod with one 12V max CXT 4. Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue. 0ah battery battery not included. Compact design at only 7-1/8" long and weighs only 6.
BrandMakita #ad
ManufacturerMakita #ad
Height9.45 Inches
Length5.04 Inches
Width10.95 Inches
Part NumberCS01Z
ModelCS01Z

8. MCC

#ad

MCC Replacement Dies for MCC's 3/8'' Threaded ROD Cutter 2x Lifetime By Double Sided Die Design good only for model ab-3u and for model ab43uthe 3/8'' blades and for model rab-3u

#ad
MCC #ad - Easy to replace dies. Replacement dies can be used on the MCC ROD CUTTER. Also good for mcc's model ab43uthe 3/8'' part and rab-3u. Do not use on other products. Mcc replacement dies for mcc 3/8 threaded ROD Cutter 2x Lifetime By Double Sided Die Design.
BrandMCC #ad
ManufacturerMCC #ad
Part Numberabe-3u
Modelabe-3u

9. MILWAUKEE'S

#ad

Milwaukee Tools M18 Threaded Rod Cutter KIT Brushless 2872-20

#ad
MILWAUKEE'S #ad - Rod cutter kit includes: rod cutter tool 2872-20, m18 rEDLITHIUM 2. 0ah battery, multi-voltage charger, and a carrying case. Optimized blade geometry delivers burr free cuts. Burr-free cuts. Cuts 1/4", 3/8" & 1/2" mild steel, 1/4" & 3/8" stainless steel, Coarse Threaded Rod. One-handed center grip design for overhead and benchtop operation. No chips, no sparks. Clearest line of sight for the most accurate cuts 1-1/2” built in trim length for uniform cuts throughout the job. Four sided rotatable cutting dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool.
BrandMILWAUKEE'S #ad
ManufacturerMilwaukee Tools #ad

10. Makita

#ad

MKTNB-43315 B-43315 Hollow Socket, 9/16 x 12-Inch, Makita

#ad
Makita #ad - Axial press-fit 1/4" hex shank provides greater durability and torsional strength compared to a one-piece hollow socket. 12 point socket provides easy fitment over 6 and 12-point fasteners. Streamlines Overhead Fastening Applications. Smooth, chamfered inner well prevents shaft from biting and ruining threads for easy fastening and unfastening. Additional socket length provides better accessibility to nuts in hard to reach places.
BrandMakita #ad
ManufacturerMakita #ad
Height14 Inches
Length1 Inches
Weight0.3 Pounds
Width1 Inches
Part NumberMKTNB-43315
ModelB-43315