Top 10 Soft Close Hinges for Toy Box – Cabinet & Furniture Hinges

As an Amazon Associate I earn from qualifying purchases.

1. Apexstone

#ad

Apexstone Soft Close Lid Support,Safety Lid Support,Soft Down Lid Support,Soft Close Lid Hinge,Set of 2

#ad
Apexstone #ad - While if unfortunately you feel it's too weak, 7 5/8 inch/195 mm from the back of the cabinet, the measurements are 3 1/2 Inch /90 mm from the back of the lid, OR you can move it on the cabinet 20 mm0.

79 inch towards the back of the cabinet. We offer 1 year 100% satisfactory warranty, if unfortunately our SOFT DOWN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return. Lids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers. As the installation, you can move the mounting point on the lid 20 mm079 inch towards the opposite direction of the hinges, and 8 5/8 inch/220 mm from the bottom of the cabinet. Length center-to-center: 8. 7 inch220 mm, extended Length Center-to-Center:14. 2 inch360 mm. Soft down the door/lid which the side length is less than 30 Inch, the WEIGHT is Less than 30 Lbs.
BrandApexstone #ad
ManufacturerApexstonetek #ad
Part NumberGS5959

2. douper

#ad

Douper Lid Support Hinge in Satin Nickel Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Cupboard Wardrobe Max Weight Support 40lb/2pcs 2 Pack

#ad
douper #ad - Come with installing screws and Allen wrench. Easy to install—our lid stay allows you to keep it installed for 75°, 90°, and 110° opening. Adjustable tension--adjust tension with allen wrench to fit for lids with different weight.

After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut. Conditioned soft closing—only with this hinge supporting less than 40lbs and keeping two hinges in same tension by your adjustment will soft closing function work perfectly. The hinge is used for side-mounting and top-mounting. It will go down slowly, and protect your fingers from being crunched. Support max 40lb/2pcs—made of durable and sturdy zinc alloy in satin Nickel, such as ones of toy chamber, cabinet, cupboard and window seat, it is designed for supporting the lid weighing less than 40lb, and wardrobe.

It will not slam shut when the lid stays open. Mark two points for drilling holes, and screw each mounting bracket into its respective place. Random stay—adjust the lid opening angle, and keep it stay in place at different angles without time limit.
Branddouper #ad
Manufacturerdouper #ad
Part NumberFBA_DP056-Big
ModelFBA_DP056-Big

3. SafeStay

#ad

Easy Install, SafeStay Lid Stay 105 Degree Open with Soft Close

#ad
SafeStay #ad - Holds lid open - never worry again about having to prop the lid open. The lid stay allows the lid to open at a maximum 105 degree angle. Small compact design - the compact design allows for installation in tight fit areas.

This lid stay will hold the lid open until you are ready to close. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
BrandSafeStay #ad
ManufacturerSafeStay #ad
Height0.5 Inches
Length4.5 Inches
Width3.1 Inches

4. VIPMOON

#ad

VIPMOON 2 Pack Lid Support Hinge in Satin Nickel Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Cupboard Wardrobe Max Weight Support 40lb/2pcs

#ad
VIPMOON #ad - Material - made of durable and sturdy zinc alloy in satin Nickel with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 40 lbs when use 2 pcsup to 20lbs - 1 Lid Stay. Easy to install - perfect for any lids or flaps when a soft closing motion is required, upward door open adjustable angle of 75°, 90°, 110°, each lid stay can be used for right or left hand mounting, self adjust, holds the door at any angle you want, easy to use.

It will not slam shut when the lid stays open. Radom stay - adjust the lid opening angle, and keep it stay in place at different angles without time limit. Unique design - the mortise-tenon joints design requires no screws, cabinet, such as mini toy box, greatly simplify the installation.

These elegant form of support hinges are well made and designed to support the lids of small box, closet, wardrobe lids. Adjustable for different weights - with the allen wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers.
BrandVIPMOON #ad
ManufacturerVIPMOON #ad

5. SEN

#ad

Gas Spring, Pressure:120N/26lb/12KG2 Pack, Gas Strut, Lid Support, Soft Close Hinges, Lift Supports, Toy Box Hinges, Gas Shocks, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring

#ad
SEN #ad - Stable & no rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years. Lids soft open gently, Ideal for supporting the lid to keep it open.

Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use. Gas strut lift support: support opens lids to a maximum angle of 100 degrees. Pressure:120n/26lb/12kg per strut;length hole center to hole center :9-11/16'';Travel:3-14/25'', Distance between ball mounts compressed: 6-1/8". It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.
BrandSEN #ad
ManufacturerSEN #ad

6. RUYUFE

#ad

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

#ad
RUYUFE #ad - Easy to install lid hinge --the lid hinge is used for side mounting and top mounting. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function.

Max weight of lid stay--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Wide usage--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Installing screws and Allen wrench in package. Soft close stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
BrandRUYUFE #ad
ManufacturerRYF #ad

7. douper

#ad

Douper Soft Close Lid Support Hinges 70N-120N Automatic Slow Lowering Safety Lid Stays Lid Bumpers Toy Box Hinges Pack of 2

#ad
douper #ad - Lid will lower gently, hold up without slamming shut and protect your fingers from being crushed. Before the purchase -- douper 70n-120n hinges will not applicable with the lid at width more than 47” and height over 23”.

Keep the lid stay in place at different angles when the opening angle is larger than 70°. Lid support -- douper 70n-120n lid support with soft close hinges will hold your lid open until you push it down. Soft close -- lid will slow the descent when the opening angle is less than 70°. And must with a 6 inch clearance. Weight support will be doubled with 2 hinges 20lbs-36lbs/ 2pcs.

Easy to install–item comes with 2 hinges and instructions. Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements on the instructions. Hinges will not work if your lid doesn’t match specified dimension and weight requirement. 70n-120n bearing capacity -- holds up to 10lbs-18lbs/1pc.
Branddouper #ad
ManufacturerDouper #ad

8. VOCOMO

#ad

Easy Install, Lid Support Hinge for Toy Box, VOCOMO Lid Stay 105 Degree Open with Soft Close

#ad
VOCOMO #ad - Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lifetime warranty - We provide worry-free lifetime warrantyno man-madeand friendly customer service. This lid stay will hold the lid open until you are ready to close. Small compact design - The compact design allows for installation in tight fit areas. Holds lid open - never worry again about having to prop the lid open. Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
BrandVOCOMO #ad
ManufacturerVOCOMO #ad
Part NumberHinges-03

9. RUYUFE

#ad

Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2, Lid Stay 105 Degree Open with Soft Close

#ad
RUYUFE #ad - Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas. This lid stay is deal for upward opening flaps, piano or butt hinges. Lid stay with soft close for toy box-- the lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight 12-21 lbs, Height 18-19 inch.

The lid hinges supports opening the lid at a maximum Angle of 105 degree. This lid support will hold the lid open until you are ready to close. Keep lid hinge stay opening, vertical cabinet doors and storage box, such as toy boxes and vanity lids, cabinetry, WIDE USAGE -- Never worry again about having to prop the lid open. Easy to install lid support-- updated install instructions can be downloaded in Amazon page.

The hinge will not applicable with the lid at width more than 27’’ and height over 18’’. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Lid stay slow closing -lid stay support built-in hydraulic dampening device.
BrandRUYUFE #ad
ManufacturerRUYUFE #ad

10. MORINBO

#ad

Morinbo Toy Box Lid Soft Close Hinges 50N-60N 11lbs-13lbs/1pc Bearing Capacity Lid Stay with Soft Close Hinges

#ad
MORINBO #ad - 22lbs-26lbs/ 2pcs. Easy to install -- each hinge can be used for right or left hand mounting, easy to install by following the install placement card.

Holds lid open -- never worry again about having to prop the lid open. The lid stay allows the lid to open at a maximum 90 degree angle. Small compact design - the compact design allows for installation in tight fit areas. Gently close design -- lids will lower slowly and gently to avoid crushing even the smallest of fingers. Morinbo lid stay will hold the lid open until you are ready to close. Bearing capacity -- 11lbs-13lbs/ 1pc, weight support will be doubled with 2 hinges.
BrandMORINBO #ad
ManufacturerMorinbo #ad