Top 10 Sliding Door Roller – Sliding Door Hardware

As an Amazon Associate I earn from qualifying purchases.

1. Homlux

#ad

Homlux Heavy Duty Sliding Barn Door Floor Guide,Adjustable Roller,Wall Mount System,Flush Bottom Design,Floor and Door Panel Non-Damage8 in 1

#ad
Homlux #ad - Adjustable guides to fit interior & exterior doors with widths from 1. 5" to 3" inches! excellenT QUALITY with Heavy duty steel bracket. Guarantees a smooth slide - we are using real bearings in our bottom guide, the roller guide is fully adjustable, so you can enjoy a quiet and smooth slide every time.

With included screws, and the wrenches needed to tighten all the hardware, installation guide, this is the only all-in-1 sliding guide that you'll ever need. Also, so you can use it with almost all of barn door. By adjusting the position of the roller in the track to fit your door panel. Hassle-free installation - ours is a complete package, and sO EASY to install and assemble.

Flat bottom design - flush bottom design allows door needn't grooved and do not destroy your beautiful floor. Durable and working smooth for maximum efficiency and quiet. No need to drill holes in the floor and it looks great both indoors and outdoors. Easy to use - mount to the wall with screws, and no groove required for door.
BrandHomlux #ad
ManufacturerHomlux #ad
Part NumberFloor Guide 1

2. PRIME-LINE

#ad

Prime-Line N 7533 Sliding Closet Door Roller Kit, Pack of 4, Includes 3/8 in. and 1/2 in. Offset Pairs, Convex Round Edge Plastic, 3/4 in. Wheel Diameter, Stamped Steel Construction

#ad
PRIME-LINE #ad - Diameter wheel with convex round edge. Fits 3/4 inch to 1-3/8 inch thick doors. 3/4 in. Two roller assemblies feature 3/8 in. Offset for use on front panel. Roller assemblies for use with top hung, by-passing sliding wardrobe doors. Offset for rear hanging panel. Two roller assemblies feature 1/2 in.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height9.44 Inches
Length0.75 Inches
Width3.81 Inches
Part NumberN 7533
ModelN 7533
WarrantyContact Prime-Line

3. PRIME-LINE

#ad

Prime-Line Products D 1797 Sliding Door Roller, Pack of 2, 1-1/2-Inch Steel Ball Bearing

#ad
PRIME-LINE #ad - 2 steel ball Bearing Rollers. 2 carriage bolts with nuts. Can be used in many different patio door or closet door roller assemblies. 2 axle pins. 2 roll pins. 2 binder posts with 8-32 x 1/2 inch screws. 2 rivet axles.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height1.5 Inches
Length0.31 Inches
Weight0.33 Pounds
Width1.5 Inches
Part NumberD 1797
ModelD 1797
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

4. PRIME-LINE

#ad

Steel, Prime-Line D 1607 Wheel Roller Assembly, 1 Pack

#ad
PRIME-LINE #ad - A leading hardware manufacturer & supplier – it is prime-line’s mission to empower high-quality repair and safety solutions. Built to last – this roller assembly features steel housing construction with steel ball bearings and unsurpassed durability.

Adjustable height – the assembly comes with a minimum collapsed height at 1-1/2-inch. Specified dimensions – the roller assembly contains 5/16-inch wheel thickness width x 1-1/4-inch diameter, 1-3/16-inch housing height, 5-3/4-inch hole centers. Solid construction – this steel ball bearing roller assembly is used to replace damaged or missing tandem roller assemblies in patio sliding glass doors. Its dimensions include 11/16-inch wide housing, and 4-5/8-inch housing length.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height1.18 Inches
Length0.68 Inches
Weight0.02 Pounds
Width5.75 Inches
Part NumberD1607
ModelD 1607
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5. SMARTSTANDARD

#ad

Flush Design Bottom Flat Barn Door Floor Guide Stay Roller Black, SMARTSTANDARD Sliding Barn Door Floor Guide for Bottom Adjustable Roller, 8 Setup Options for DIYers

#ad
SMARTSTANDARD #ad - It is very easy for you the install the floor guide by following the manual;. Service: we provide 24-hours online customer service to help you to solve the problem more efficiently.

Brand: smartstandard; condition: brand new; material: Solid Steel and POM NYLON; Surface: Frosted black;. Easy to install: a step by step manual is included in the set. Fits all door panel: 1 guide with 8 different assemble options, this floor guide can be used in all sizes of door panel;. Flush bottom: in the bottom of the floor guide, there is a groove which can protect the floor from scratching by the screw;. At the most beginning, please choose the configuration that workable and selected the necessary accessories.
BrandSMARTSTANDARD #ad
ManufacturerSMARTSTANDARD #ad
Part NumberSDHACC05

6. Slide-Co

#ad

Slide-Co 131449 Sliding Glass Door Roller Assembly, 1-1/4-Inch

#ad
Slide-Co #ad - Adjustable steel housing assembly. Note: verify dimensions against line drawing image before ordering. Housing dimensions: Thickness 9/16". 1-1/4" steel ball Bearing Roller Unit. Length 2" & height 1-3/16". For glass doors. Steel ball bearing wheel. Sliding glass Door Roller Assembly. Adjustable Steel Housing.
BrandSlide-Co #ad
ManufacturerTV Non-Branded Items (Home Improvement) #ad
Height0.24 Inches
Length3.5 Inches
Width3.5 Inches
Part Number131449
Model131449

7. PRIME-LINE

#ad

Prime-Line Products D 1735 Roller Assembly, Steel Ball Bearings, Adjustable, 1-1/4 in. Tandem Wheels, Concave Edge

#ad
PRIME-LINE #ad - Housing length. This steel ball bearing roller assembly is used to replace damaged or missing tandem roller assemblies in patio sliding glass doors. 5/16 in. Steel housing construction with steel ball bearing wheels. Housing height, 11/16 in. Adjustable height with minimum collapsed height at 1-9/32 in. Wide housing, 3-1/8 in. Wheel thickness width x 1-1/4 in. 1-1/32 in.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height1.03 Inches
Length0.68 Inches
Weight0.35 Pounds
Width3.12 Inches
Part NumberD1735
ModelD 1735
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

8. PRIME-LINE

#ad

Prime-Line Products D 1822 Sliding Door Roller Assembly with 1-1/2-Inch Steel Ball Bearing

#ad
PRIME-LINE #ad - 1-1/2 in. Used by a variety of sliding patio door manufacturers. Concave ball bearing steel roller. Used on metal framed sliding patio doors. Made of durable stamped steel. 1/4-20 threaded mounting hole on the back end of the housing.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height1.56 Inches
Length0.75 Inches
Weight0.29 Pounds
Width2.12 Inches
Part NumberD 1822
ModelD 1822
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

9. SMARTSMITH

#ad

Ball Bearings Design!!!New Upgraded 2 Pcs Barn Door Floor Guide for Doors!!! | Stay Roller Sliding Adjustable by SmartSmith | Unique Guide Flush with Floor | Durable Steel Frame Black

#ad
SMARTSMITH #ad - But that’s not all!it’s super easy to install! the whole system will take you less than 10 mins to install. The directions are easy to follow and even if you’re not very handy you still wont have no problem, All in all, this is a great quality hardware set at a great price and very easy to assemble. Our competitors haven't gone to these lengths resulting in a messy unappealing look with poor functionality.

This is amplified in highly viewed areas such as living rooms. We make a difference! a heavy stay roller bottom guide is an esseonstruction-black powder coated finish: our premium black powder coantial component to a proper sliding door installation. However, every time you slide your door open, ball bearing wheels are smooth, if you buy a cheap door guide, and quiet, if you are really need a working door guide that's quality made, you will either alert your dog or wake somebody up. So, the barn door guide by SmartSmith is the solution you've been looking for! Completely clean flush to ground and upgraded round corners:Countersunk screws design to make our floor guide sit flat to floor, ensure no damage to your floor.

Upgraded round corner shape to avoid tripping hazard, no gap between bracket and floor, keep childrens and toes safe from the hurts. Heavy duty construction-black powder coated finish: our premium black powder coated bracket is made from pristine steel and perfectly shaped to offer a flush fit with your wall and floor. The smartsmith groove system and low profile hardware sits invisibly inside the unit which means there is no gap between bracket and floor.
BrandSMARTSMITH #ad
ManufacturerOAKEEY #ad
Part NumberLDL01X2 SS-01

10. PRIME-LINE

#ad

2-Pack, Prime-Line Products D 1798 Sliding Door Roller Set with 1-1/4-Inch Nylon Ball Bearing

#ad
PRIME-LINE #ad - Concave Grooved. 2 rivet axles. Constructed w/steel ball bearings. Can be used to repair many different patio door roller assemblies. 2 binder posts with 8-32 x 1/2 inch screws. Plastic tires. 2 axle pins.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height1.25 Inches
Length0.31 Inches
Width1.25 Inches
Part NumberD 1798
ModelD 1798
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.