Top 10 SDS-Plus Drill Bit Set – Rotary Hammer Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. WORKPRO

#ad

STONE & CONCRETE, CEMENT, WORKPRO 8-Piece SDS-plus Drill Bit Set, Carbide Tip, SDS+ Rotary Hammer Drill Bit Set with Storage Case for BRICK

#ad
WORKPRO #ad - Special flute design - the wider and deeper U-shaped flute design cleans debris out fast for easier, efficient drilling, work time longer. The smaller grooves fix bit in the chuck. The sds plus drill bit will drill holes in concrete faster and easier.

Multipurpose - concrete drill bits set is fully compatible with all SDS-Plus Rotary Hammer Drill, MAKITA, like BOSCH, etc. The larger grooves allow bits slipping in the chuck when working, enhancing the drilling torque and hammering energy. Carbide-tipped bit - luxembourg imported, carbide-tipped crown bit heads more stable, harder, more durable, extra-long tool life.8

8-piece sds-plus drill bits - set includes: 1/4 x 4-inch, 5/16 x 4-inch, 9/32 x 6-inch, 1/4 x 6-inch, 3/8 X 6-inch, 3/16 X 6-inch, 5/16 X 6-inch, 1/2 X 6-inch. Grooves on sds plus shank - the shank has two types of grooves TOTAL OF FOUR. Ideal for drilling holes in concrete, Milwaukee, brick, Dewalt, stone and masonry.
BrandWORKPRO #ad
ManufacturerHANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad

2. Fleetise

#ad

Concrete Drill Bits Masonry Chisel Set 17pcs for Impact Rotary Hammer Drills SDS Plus Carbide-Tipped 4 Flutes Drill Bit for Bricks, Stone with Storage Case, Blocks

#ad
Fleetise #ad - Enhanced 4-flute design reduces stress and helps the bit run cooler, and for fast dust removal. The concrete drill bits are tipped with durable yG8C tungsten carbide and with 40Cr carbon steel body.

Warranty: 12 month return and life time support, money back or new item for replacement. 3/16", 3/8", 10 mm, 6.5 mm, 2 flat chisel and 1 U-groove Chisel. The sds - plus shank is suitable for most rotary hammer drill. They are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry. The bit set includes 13pcs drill bits with 5. 5 mm, 7 mm, 8 mm, 1 point chisel, 1/4", 6 mm, 5/16", 1/2", 12 mm, 14 mm, 5/8", 9/16", 16 mm approx.4pcs chisels included, those are constructed of rugged 40Cr carbon steel, for cutting concrete, asphalt or masonry and bull point chisel for heavy duty concrete breaking.
BrandFleetise #ad
ManufacturerFleetise #ad
Part NumberFleetise

3. BOSCH

#ad

BOSCH 7 Piece Carbide-Tipped SDS-plus Rotary Hammer Drill Bit Set with Storage Case HCK001

#ad
BOSCH #ad - Portable: the included Brute Tough Storage Case allows for easy access, organizing and portability. Reliable: unique wear marks alert when tips of bits wear beyond ANSI specification while the centric tip ensures quick starts and rounder holes.

Longevity: bosch-made, carbide-tipped bit heads are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry. Versatile: set includes one of each hc2010, brick, hc2081, hc2051, and two hc2041 for handling a wide variety of heavy-duty drilling applications including concrete, HC2061, HC2040, block and more. Innovative: the bosch hck001 drill bit set features patent pending, keep the bit running cooler, optimized 4-flute design to reduce bit stress when drilling, and for fast dust removal.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight1.3 Pounds
Width0 Inches
Part NumberHCK001
ModelHCK001
Warranty1 Year

4. COMOWARE

#ad

COMOWARE Rotary Hammer Drill Bits Set & Chisels- SDS Plus Concrete Masonry Hole Tool 17pcs with Storage Case

#ad
COMOWARE #ad - High quality carbide material: it is featured in a harder YG8C Carbide tip and carbide steel body. 3/16", 6 mm, 14 mm, 8 mm, 1/4", 1/2", 5/8", 1 point chisel, 12 mm, 10 mm, 2 Flat Chisel and 1 U-groove Chisel. Professional and widely use: compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling.

Sds chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove. Universal connection desigh: the sds - plus shank is suitable for most rotary hammer drills on the market and meets most of your needs. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs.

Multifunctional using: the bit set includes 13pcs drill bits with 5. 5 mm, 7 mm, 9/16", 5/16", 6.5 mm, 3/8", 16 mm approx. The robust head is ideal for high impact applications. Convenient organization and storage: Come with a plastic index case, convenient to use and carry. It allows for precise starts in materials such as reinforced concrete.
BrandCOMOWARE #ad
ManufacturerCOMOWARE #ad

5. wesleydrill

#ad

Wesleydrill Rotary Hammer & Chisels Masonry Drill Bits Set 17 Pcs SDS Plus Drill Set Fit for Drill Grooves in Concrete,Brick,Walls and Cuts

#ad
wesleydrill #ad - Universal design to meet demand:chisel bit hammer drill the SDS - PLUS shank is suitable for most rotary hammer drills on the market and meets most of your needs. The sds chisel is used in conjunction with the electric hammer drill to drill grooves in concrete, brick and walls, cuts and chisels.

The robust head is ideal for high impact applications. Function: masonry drill bit set combined with the percussion drill, the electric hammer drill produces lighter impact force for effective drilling. Advantage:hammer concrete drill set the robust head is ideal for high impact applications. Come with a plastic index case, convenient to use and carry.

Material:sds hammer chisel set is featured in a harder YG8 Carbide tip and carbide steel body. Specifications and packaging:13pcs sds hammer drill set. Include size:5. 5x110mm, 10x260 mm, 6x160mm, 4pcs chisel :1 point chisel14x250mm, 6x110mm, 8x160 mm, 12x260 mm, 10x160x2, 2 flat chisel14x250x20mm, 14x210mm, 6.5x160 mm, 5. 5x160mm, 16x260 mm, 7x160 mm, 14x250x40mm and 1 u-groove Chisel 14x250mm all in BMC.
Brandwesleydrill #ad
Manufacturerwesleydrill #ad
Part NumberCT007

6. Makita

#ad

Deep HD Drilling for Concrete & Masonry, SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers, Carbide Tipped Bits, Makita 3 Piece

#ad
Makita #ad - Easily drill into deep concrete, brick, and masonry longer & more precisely with makita’s Reinforced Premium Tungsten Carbide & steel bit integrity for unmatched long life & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS. Ideal for general contractors & construction industry that require an extra long flute size sDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers.

3 extra-long makita drill bit set includes: 1 bit of 1/2" x 12" with a 10" maximum drilling depth + 1 bit of 5/8" x 12" with a 10" Maximum drilling depth + 1 Bit of 1" x 10" with a 8" Maximum drilling depth. Makita’s sds-plus deep drill bit set for sds+ rotary hammers with 3 extra-long & reliable drilling into 8-10" Reinforced Concrete, Premium, 5/8", tungsten carbide drill bits of 1/2", Heavy-Duty, Brick & thick, Tile, & 1" diameter for SMOOTH & Cinder Block applications.

Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, resulting in high bit consumption rate, one-piece bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, project completion delays, allowing for effective and precise drilling.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length13 Inches
Weight0.71 Pounds
Width0.75 Inches
Part NumberP-01000
ModelP-01000

7. Sabre Tools

#ad

1/4in x 12in, Concrete, Stone, Carbide Tipped, Rotary Hammer Drill Bits for Brick, 3/8in x 12in, 1/2in x 12in, 5/16in x 12in, Sabre Tools 4-Piece 12in SDS Plus Drill Bit Set

#ad
Sabre Tools #ad - Compatible with all sds plus sized rotary hammer drills; Bosch, Makita, Milwaukee, Hilti, Hitachi, DeWalt, etc. Drilling speed – sabre’s sds hammer drill bits feature 2-flute self-centering carbide tip ensuring fast cut speeds and accurate holes.

4-piece 12” sds hammer drill bit set – includes: 1/4” x 12”, 5/16” x 12”, 3/8” x 12”, 1/2” x 12”. Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the bit to remain cool. Our high quality sds bits are designed to work in masonry applications; brick, block, stone, concrete, stucco, etc.
BrandSabre Tools #ad
ManufacturerSabre Tools #ad
Part Number355513800440

8. Makita

#ad

Deep HD Drilling Into Concrete & Masonry, Makita 7 Piece, SDS-Plus Complete Drill Bit Set for SDS+ Rotary Hammers

#ad
Makita #ad - Ideal for general contractors and construction industry that require ultra duty sds+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills. Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, project completion delays, allowing for EFFECTIVE and PRECISE drilling.

Easily & smoothly drill 4-5x more into reinforced concrete, premium tungsten carbide & steel bit integrity for unmatched ease, brick and masonry by relying on makita’s reinforced, long life & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.7

7 ultra-duty makita sds-plus drill bit set for up to 10“ deep drilling depths, xrh01z, including the makita hr2475, including the most frequently used diameters: 1 bit of 5/32“ + 1 bit of 3/16” + 1 bit of 1/4” + 1 bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" + 1 Bit of 3/4”, HR2641X1, HR2811F, HR2661, 1" or Greater SDS-Plus Hammer Drills. Makita’s 7 piece complete sds-plus drill bit set for 1" or greater sds+ chuck rotary hammer drills has 7 premium, Tile, Reinforced Concrete, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10” into Masonry, Long-Lasting, Brick & Cinder Block.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length7.25 Inches
Weight0.71 Pounds
Width0.75 Inches
Part NumberD-00979 D-00935 D-00898 D-00913 D-01046
ModelD-00979 D-00935 D-00898

9. Makita

#ad

Makita 5 Piece, Aggressive Drilling For Concrete & Masonry, SDS-Plus Drill Bit Set For SDS+ Rotary Hammers, Carbide Tipped Bits

#ad
Makita #ad - Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, project completion delays, resulting in high bit consumption rate, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.

5 heavy-duty makita sds-plus drill bit set for medium 4" drilling depths includes: 1 bit of 3/16" + 1 bit of 1/4" + 1 bit of 5/16" + 1 bit of 3/8" + 1 bit of 1/2" will work on any sds+ rotary hammer with at least 7/8" Chuck Size, HR2811F, HR2661, HR2641X1, XRH04Z, XRH01Z, including the Makita HR2475, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills. Easily & smoothly drill 3-4x more into reinforced concrete, brick and masonry by relying on makita’s reinforced, premium tungsten carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.

Ideal for general contractors and construction industry that require heavy duty sds+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers. Makita’s sds+ drill bit set with case for 7/8" or greater sds-plus chuck rotary hammer drills | this set has 5 premium, Tile, screwing and fastening into 4" Deep Heavy-Duty Masonry, Tungsten Carbide Bits for EASY & Reliable drilling, Reinforced Concrete, Long-Lasting, Heavy-Duty, Brick & Cinder Block.
BrandMakita #ad
ManufacturerMakita #ad
Height3 Inches
Length7.25 Inches
Width0.75 Inches
Part Number1
ModelD-07973

10. Sabre Tools

#ad

Stone, 5/8in x 12in, 7/8in x 12in, 1in x 12in, Concrete, Rotary Hammer Drill Bits for Brick, Sabre Tools 4-Piece 12in SDS Plus Drill Bit Set, Carbide Tipped, 3/4in x 12in

#ad
Sabre Tools #ad - Compatible with all sds plus sized rotary hammer drills; Bosch, Makita, DeWalt, Hilti, Hitachi, Milwaukee, etc.4-piece 12” sds hammer drill bit set – includes: 5/8” x 12”, 3/4” x 12”, 7/8” x 12”, 1” x 12”.

Drilling speed – sabre’s sds hammer drill bits feature 2-flute self-centering carbide tip ensuring fast cut speeds and accurate holes. Our high quality sds bits are designed to work in masonry applications; brick, block, concrete, stone, stucco, etc. Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the bit to remain cool.
BrandSabre Tools #ad
ManufacturerSabre Tools #ad
Part Number355513800457