As an Amazon Associate I earn from qualifying purchases.
Robust #ad - Robust live centers use bigger bearings, and warrants them for five years. 2 morse taper shank is tapped 3/8-16 for draw bar applications.
Robust #ad - A 5/16” thru hole accommodates drilling. The cup center is threaded 3/4‐10 for standard accessories. The tip of the center extends and reverses to accommodate your turning.
Savannah #ad - This can typically be traced to play on a less than perfect factory lathe issued “live center”. This live center will work on lathes that accept Morse Taper 2 tail stocks. Precision machined to exacting specifications, 3-3/8" bull nose cone, heat sealed double bearings, the Savannah HD Live Center is the ideal live center for novice and professional alike. In many instances, dual Bearing Live Center from Savannah addresses this issue and more! The high quality dual bearings are heat sealed and permanently lubricated to provide vibration free performance while turning and also provide you with years of dependable use.
The precision machined, Heavy Duty, vibrates a little or even worse it seizes up and stops working altogether.
This live center runs smooth and true during the turning process and may become your go to live center once you start using it. A lot of wood turners don’t think about the live center that’s in their tailstock until it makes a funny noise, that funny noise or vibration leads to irritating marks or spirals in your project. The heavy duty dual bearing live center includes: a 3-3/8” bull nose reversible cone, 1-5/8” 60 degree full point cone, removable center spur point and a convenient knock out rod. This gives you the ability to create wonderfully unique looking projects that are off center like asymmetrical pendants, spheres and more!
VINWOX #ad - 2 morse taper shank compatible with popular wood lathes with a MT2 headstock and tailstock spindles. Automatic center Punch makes centering in a snap.
PSI Woodworking #ad - 60-degree point. Cone is 2-1/2" by 1-11/16" overall diameter. Ball bearing precision; turns smoothly. Huge live center for heavy duty workpieces. Large live lathe center.
HFS #ad - Packing： shipped in Protective case for storage. Size: #2 morse taper cone is 2-1/2" by 1-11/16" overall diameter. Note: place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use not included.
1. Robust
#adFor Woodturning, Robust Live Center 2MT
#adMore information #ad
The cup center is threaded 3/4‐10 for standard accessories. A 5/16” thru hole accommodates drilling. The tip of the center extends and reverses to accommodate your turning.| Brand | Robust #ad |
| Manufacturer | Robust #ad |
| Height | 2 Inches |
| Length | 6 Inches |
| Weight | 1 Pounds |
| Width | 2 Inches |
| Part Number | Robust_Live_Center |
More information #ad
2. Robust
#adRobust Live Center and Cone Set Combo, 2MT, for Woodturning
#adMore information #ad
2 morse taper shank is tapped 3/8-16 for draw bar applications. Cone set includes aluminum tip and reversible 4″ Bull Nose Set; fits other manufacturer’s centers with 3/4-10 threads.| Brand | Robust #ad |
| Manufacturer | Robust #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Width | 4 Inches |
| Part Number | RTR-LA-LCSET |
More information #ad
3. Savannah
#adSavannah Heavy Duty Dual Bearing Live Center For Woodworking Lathes and Large or Small Wood Turning Projects. Ultra Smooth Live Center Performance with Minimal Play for MT2 Lathes
#adThe precision machined, Heavy Duty, vibrates a little or even worse it seizes up and stops working altogether.
More information #ad
The heavy duty dual bearing live center has a 3/4” x 10tpi thread which not only allows you to attach the included accessories, platters, vases, candle stick holders and more! With the included accessories you can Turn bowls, dowels, it also allows you to create many different types of turning jigs for offset turning. The live center is housed in a durable casing that is made from machined turned steel alloy and is coated with a black oxide finish. This live center runs smooth and true during the turning process and may become your go to live center once you start using it. A lot of wood turners don’t think about the live center that’s in their tailstock until it makes a funny noise, that funny noise or vibration leads to irritating marks or spirals in your project. The heavy duty dual bearing live center includes: a 3-3/8” bull nose reversible cone, 1-5/8” 60 degree full point cone, removable center spur point and a convenient knock out rod. This gives you the ability to create wonderfully unique looking projects that are off center like asymmetrical pendants, spheres and more!
| Brand | Savannah #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | 7559 |
| Model | 7559 |
More information #ad
4. Oneway
#adOneway Live Center
#adOneway #ad - Kit includes live center, full Point Cone, bull nose Cone, Center Point and Knockout Rod. Oneway model #2064. 2 morse taper - for most standard and large wood lathes with a #2MT tailstock quill.More information #ad
| Brand | Oneway #ad |
| Manufacturer | Oneway #ad |
| Height | 4 Inches |
| Length | 2 Inches |
| Weight | 1 Pounds |
| Width | 2 Inches |
| Part Number | ONE-2064 |
| Model | 2064 |
More information #ad
5. VINWOX
#ad2 Years Warranty, VINWOX 3 PCS Wood Lathe Center Set #2MT Including 1-5/16 Inch Live Center, 13/16 Inch Safety Drive Center and Center Punch
#adMore information #ad
Total steel construction for heavy duty load. 36º slim center design leaves more space for crafting and skill performance. Designed for mini, midi and Heavy Duty Wood Lathe in medium speed and high speed.| Brand | VINWOX #ad |
| Manufacturer | VINWOX #ad |
| Part Number | wood lathe center-2 |
More information #ad
6. PSI Woodworking
#adPSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center
#adMore information #ad
| Brand | PSI Woodworking #ad |
| Manufacturer | PSI Woodworking #ad |
| Height | 2 Inches |
| Length | 5.5 Inches |
| Weight | 0.99 Pounds |
| Width | 2 Inches |
| Part Number | LCENTLT2 |
| Model | LCENTLT2 |
| Warranty | 2 Years Under Normal Use |
More information #ad
7. PSI Woodworking
#adPSI Woodworking PKMSTS2 Live Tailstock Mandrel Saver #2 Morse Taper
#adPSI Woodworking #ad - Provides no pressure on the tailstock end of the mandrel shaft thus eliminating any bending or vibration. Unique design to support the end of your penturning mandrel.More information #ad
There is no longer a need for spacer bushings. Will work with all mandrels with a diameter of 0 . Compatible with lathes that accept #2MT accessories in tailstock. 245" or less.| Brand | PSI Woodworking #ad |
| Manufacturer | PSI Woodworking #ad |
| Height | 1.7 Inches |
| Length | 3.8 Inches |
| Weight | 0.4 Pounds |
| Width | 1.8 Inches |
| Part Number | PKMSTS2 |
| Model | PKMSTS2 |
| Warranty | 2 Years Under Normal Use |
More information #ad
8. Easy Wood Tools
#adEasy Live Center by Easy Wood Tools
#adEasy Wood Tools #ad - 5/16” thru hole. 2 morse taper. Precision angular contact bearings, sealed and lubricated. Cup center threaded 3/4-10 for added accessories. Require no maintenance and can tackle both thrust and radial loads.More information #ad
| Brand | Easy Wood Tools #ad |
| Manufacturer | Easy Wood Tools #ad |
| Part Number | 12851 |
More information #ad
9. HFS
#adHFS R Heavy Duty Live Tailstock Center #2 Morse Taper
#adMore information #ad
Ideal for many turn-between-center woodturning projects. Application: precision ball bearings for smooth, balanced turning. Sturdy: alloy steel shaft construction for ultimate strength and longevity.| Brand | HFS #ad |
| Manufacturer | HFS #ad |
| Weight | 1.01 Pounds |
| Part Number | LTC-1MT |
More information #ad
10. Almhs
#adMT2 Live Center Wood Lathe Drive Spur Cup 4pcs Set with 2Pcs Extra Replacement Tips with Good Quality Wooden Box
#adAlmhs #ad - 2pcs spare pointtips, Total with 4pcs pointtips. Spur driver, 1pc 5/8" dia. 1pc wooded case. Cupped dead center 1pc liver center for smooth friction free turning. The set includes: 1pc 1/8" dia. 4pcs mt2 shank Drive Spur Cup live center. Spur center, 1pc 5/8" dia.More information #ad
| Brand | Almhs #ad |
| Manufacturer | Almhs #ad |
| Part Number | DJ001 |
More information #ad
