As an Amazon Associate I earn from qualifying purchases.
1. RIKON Power Tools #ad
Rikon 13-920 Miter Gauge Compatible with Rikon 10-305 10-inch Bandsaw #adRIKON Power Tools #ad
- For fine detail work - when using a table saw, band saw, or stationary disk sander make sure you use this miter gauge to ensure you see the fine detail you need to see. Made from sturdy aluminum design with easy to read adjustments.
This product is great for cross cutting. Compatible with - this miter gauge is made to be used with Rikon 10-305 and 10-306. Rikon miter gauge - this rikon miter gauge is perfect for holding your workpieces while cutting. Includes - this miter gauge made for a 10-inch bandsaw includes a T-square slot bar.
|Brand||RIKON Power Tools #ad|
2. RIKON Power Tools #ad
RIKON Professional Miter Gauge, 13-912 #adRIKON Power Tools #ad
- This miter gauge is easy to use and you will see results immediately. Standard t-slot - correct your cuts with this adjustable aluminum support plate. Versatile - whether you have a band saw or table saw this miter gauge will work well and help you achieve the perfect cut.
It fits standard t-slot ¾” x ⅜” miter slots. Easy to use - don’t ever make a mistake cutting a straight line again. Miter gauge - this adjustable aluminum support plate is a perfect locking mechanism and helps your workpiece cut at the precise angle you want.
|Brand||RIKON Power Tools #ad|
3. RIKON Power Tools #ad
RIKON Power Tools 10-305 Bandsaw With Fence, 10-Inch #adRIKON Power Tools #ad
- Cast iron table-large 13-3/4-inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size. Frame is made of steel plate, stronger than plastic frames used by other manufactures. Micro adjustable guide Post- Raise and lower the guide post height with the turn of a handle.
Solid steel design- the 10-305 is a scaled down version of the popular 10-345 and 10-325. Rip fence- a quality rip fence is now included. Motor - 1/3hp motor provides ample power for cutting bowl and pen blanks. Easily removed to do free hand work.
|Brand||RIKON Power Tools #ad|
|Warranty||5 Year Warranty|
4. RIKON Power Tools #ad
RIKON Power Tools 10-3061 10" Deluxe Bandsaw, Includes Fence and Two Blade Speeds #adRIKON Power Tools #ad
- Table size: 13-3/4” x 12-1/2”, 45 degrees right. High quality machine – this product includes the 10-3061 deluxe bandsaw and 5/16” x 70-1/2” 6tpi bandsaw blade. Toggle between two different blade speeds to cut nearly anything. Dimensions – fence size: 12-1/4” x 2-3/8”, 2-1/4” id, dust port size: 2-1/2” od, base size: 15-7/8” w x 9-3/8” d, overall size: 34-1/4” H x 21” W x 16-1/4” D.
Motor details - the increased cutting capacity and increased 1/2hp motor make this bandsaw great for small to medium sized projects.
Great for producing smooth cuts in wood, metal, and more, this machine is perfect for any craftsman's project. Rikon power tools is dedicated to designing and manufacturing woodworking machinery of the highest quality that enhances the woodworking experience.
Features – features tool-less blade guides; quick-release blade tension lever; large blade tracking knob and viewing window; dust port for shop vacuum hookup; and a safety paddle on/off switch. Motor: 1/2hp, 1720rpm, 110v 60hz, 5.5amp, blade speeds: 1515 or 3280 ft/min. Table details - the tilting, table tilt: 5 degrees left, 0-45° cast iron table makes for easy operation. Comes with 5/16" x 6tpi regular blade and a 5-year limited warranty.
5. Fulton #ad
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop #adFulton #ad
- Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Both ends of the fence are cut at exactly 45 degrees. The fulton miter gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.
The aluminum miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges.
1 hole is at 90 degrees while the 6 holes on both sides are at 22. 5, pull the spring loaded indexing pin outward, adjustable, 67.5 and 90 degrees. When not in use the flip stop can be flipped up and out of the way.
The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. The. 200” thick, 30, rotate the head to the desired position, 60, 45, solid aluminum head is machined with 13 positive stop holes. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. Also include are two sticky back measuring tapes.
6. REEKON #ad
Chop, and Band Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials, REEKON M1 Caliber Measuring Tool for Miter #adREEKON #ad
- A better way to measure - the m1 caliber is a fully integrated, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, patent-pending, LCD screen. Digitize your miter saw - using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools.
Quick and easy setup - clamp to your saw fence, input your blade thickness and begin to cut.
Make miter, bevel, compound, cut-off, and straight cuts on a variety of materials ranging from boards to composites to pipe. The m1 will provide the most accurate read on smooth materials. Compatibility - displays both english and metric measurements and is compatible with most miter, chop and vertical band saws.
The m1 caliber eliminates the need for a tape measure and pencil. Perfect for professionals, contractors, release the arm, woodworkers and other tradespeople. Increased safety - whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location.
|Manufacturer||REEKON Tools #ad|
7. PORTER-CABLE #ad
Porter Cable 514007535 Miter Gauge Assembly #adPORTER-CABLE #ad
- This is an o. E. M. This is a Porter Cable replacement part. Fits various Porter Cable models. Oem part number 514007535. Authorized part. Part number 514007535.
8. VEVOR #ad
Miter Saw Fence w/Laser Marking Scale, 24" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, VEVOR Precision Miter Gauge #adVEVOR #ad
- The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. The adjustable, 22. 5, 45, 30, solid aluminum head is machined with 11 positive stop holes. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
1 hole is at 90 degrees while the 5 holes on both sides are at 10, 60 and 90 degrees. Metric and imperial scale makes your work more convenient. Compatible standeded slot: our table saw sled is suitable for a standard 075 x 038-inch miter slot.
Precise angle cutting: this table saw accessory is 004 inch / 1 mm high precision. Laser marking technology is friction-resistance to ensure accuracy.
Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. Miter gauge fence system is currently a must-have for every family. The mitre gauges are flat without burr, secure, and hands-free. Wide application: the table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers.
|Part Number||24 inch Table Saw Miter Gauge|
|Model||24 inch Miter Gauge|
9. POWERTEC #ad
POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops #adPOWERTEC #ad
- Includes: 1 miter Gauge for Table Saw. Precision: angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. Features: a lightweight design with a durable laser-cut aluminum construction, and adjustable expansion discs that remove all side play from the bar, universal fence mounting bracket, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, large gauge handle, pivoting locking mechanism, creating a perfect fit.
Universal design: works with most contractor style, making it compatible with popular brand table saws, band saws, or tools with standard miter slots 3/4” width x 3/8” depth with or without T-slots, full sized saws, router tables, disk and belt sanders.
Please note : will not work with smaller saws or tool with 5/8” miter slots. Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw band saws and other applications and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
10. INCRA #ad
INCRA MITERV27 Miter V27 Miter Gauge #adINCRA #ad
- Miter gauge featuring 27 angle stops for precise incremental control. Delivers extreme miter cutting accuracy. Four expansion points adjust for zero side play. Universal mounting Bracket supports any user-made fence. No-nonsense design and compact size.
|Warranty||1 year replacement warranty|