Top 10 Return Vent Cover – Registers, Grilles & Vents

As an Amazon Associate I earn from qualifying purchases.

1. EZ-FLO

#ad

White Return Air Grille, 14 inch W x 6 inch H Opening, 14" x 6", EZ-FLO 61628

#ad
EZ-FLO #ad - The return air grille measures 15-3/4 inch w x 7-3/4 inch L with a duct opening of 14 inch W x 6 inch L; 2 vent rows. Includes 2 screws for an easy installation. The grille features a powder-coated white finish that resists flaking, scratching and fading. Designed to improve air ventilation in HVAC systems. Constructed of heavy-duty steel that provides strength and durability. Can be installed in both sidewall and ceiling locations.
BrandEZ-FLO #ad
ManufacturerEZ-FLO #ad
Height0.31 Inches
Length15.75 Inches
Weight1 Pounds
Width7.75 Inches
Part Number61628
Model61628
Warrantylimited lifetime

2. Handua

#ad

24" X 18" Filter Included Heavy Duty Steel Return Air Filter Grille Removable Face/Door for 1-inch Filters HVAC Duct Cover Grill, White | Outer Dimensions: 26 5/8"W X 20 5/8"H for 24x18 Duct Opening

#ad
Handua #ad - Using our return air filter grille within your ventilation system will improve your home circulation. Durable white powder coated, Heavy Duty Steel, removable face allows easy access to replace air filter.

The door/face is removable for easy filter change and cleaning, this Grill uses a 1" thick filter MERV 8 filter included. The steel is stamped so there is no sharp edges. Always measure the wall opening to determine which size you should order. Wall opening Size = Listed Size. Handua return air filter grille used for sidewall or ceiling openings. Our return air filter grilles do not require screwdriver to open, you can easily open the latch with a finger move. If the hole on the wall is 24"Wx18"H please order 24"x18".
BrandHandua #ad
ManufacturerHandua #ad

3. Accord Ventilation

#ad

16-Inch x 8-InchDuct Opening Measurements, White, Accord ABRGWH168 Return Grille with 1/2-Inch Fin Louvered

#ad
Accord Ventilation #ad - Steel construction with 1/2-in spaced fins. Listed product size refers to the duct opening measurements. Measure the duct opening to determine the correct size, not the outside of the grille. For wall or ceiling application. 16-in x 8-in is the size of the duct opening dimensions, the grille itself measures 17. 7-in x 9. 7-in.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height0.33 Inches
Length17.35 Inches
Weight1.1 Pounds
Width9.55 Inches
Part NumberABRGWH168
ModelABRGWH168

4. Eureka Air

#ad

Home and RV, Eureka Air High Strength Magnetic Vent Cover 3 Pack 8" X 15.5" for Floor, Wall and Ceiling Registers, HVAC and AC

#ad
Eureka Air #ad - The thickness is optimized for wall and overhead vents while still perfect for floor use. Highest strength: guaranteed strongest! our. 048” 1. 2mm thick high energy magnet produces 1. 3 lbs/in2 90 g/cm2 pull force.

They don't want you to know! best material: our magnetic material is formulated exclusively for eureka air to provide greater flexibility which conforms to the shape of the register and seals out air. Increase effeciency: lower energy cost while making home more comfortable by redirecting air. Start saving money today! buy with confidence: we are a small team of aerospace engineers, right here in the USA, dedicated to provide our customers with the highest quality products with complete transparency.

If not completely satisfied, please contact us for a full refund. Our competitors do not share their data. Multi-purpose and versatile, our magnetic vent covers are great for HVAC and RV, indoor or outdoor use! Custom fit: available in two sizes which are easily trimmed to your exact register / vent dimensions.
BrandEureka Air #ad
ManufacturerSpectrum Products #ad
Height0.06 Inches
Length8 Inches
Width15.5 Inches
Part NumberEAHE815
ModelEAHE815

5. Accord Ventilation

#ad

White, 20-Inch x 20-InchDuct Opening Measurements, Accord ABRFWH2020 Return Filter Grille with 1/2-Inch Fin Louvered

#ad
Accord Ventilation #ad - Steel construction, 1/2-in spaced fins. Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning. For sidewall or ceiling application. Listed product sizes refer to the duct opening measurements, not the register itself. The number of louvered columns and mounting holes will vary based on the size of the grille ordered.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.6 Inches
Length22.1 Inches
Weight8.1 Pounds
Width22.1 Inches
Part NumberABRFWH2020
ModelABRFWH2020

6. HVAC Premium

#ad

HVAC Duct Cover, White Outer Dimensions: 25.75"w X 15.75"h, Sidewall and Ceiling, 24"w X 14"h Steel Return Air Grilles

#ad
HVAC Premium #ad - 24"w x 14"h is the size for the duct opening measurement only, actual front end outer dimensions are 25. 75" width x "w X 15. 75" height - see below in description how to measure a gRILLE. Carefully shrink wrapped With Cardboard Backing To Prevent Damage In Shipment. High quality solid stamped steel with Counter-Sunk Screw Holes Screws Included and No Sharp Edges. Easy unrestricted air flow for Your HVAC System - 50° angled to provide maximum airflow.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFRG2414W

7. HVAC Premium

#ad

White Outer Dimensions: 15.75"w X 9.75"h, HVAC Duct Cover, 14"w X 8"h Steel Return Air Grilles, Sidewall and Ceiling

#ad
HVAC Premium #ad - Carefully shrink wrapped With Cardboard Backing To Prevent Damage In Shipment. Easy unrestricted air flow for Your HVAC System - 50° angled to provide maximum airflow. High quality solid stamped steel with Counter-Sunk Screw Holes Screws Included and No Sharp Edges. 14"w x 8"h is the size for the duct opening measurement only, actual front end outer dimensions are 15. 75" width x "w X 9. 75" height - see below in description how to measure a gRILLE.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFRG148W
ModelCECOMINOD063481

8. Rocky Mountain Goods

#ad

Louvered Design, Consistent air Flow 10" x 6", Includes Full Installation kit, Heavy Duty Steel with Premium Finish, Paintable Vent Cover, Rocky Mountain Goods Air Return Grille, Matte White

#ad
Rocky Mountain Goods #ad - Heavy duty steel air return vent cover. Lifetime warranty. Louvered design for look and better air flow. Size of wall vent cover shown made to perfectly fit duct opening. Includes installation kits with screw for quick installation of air return register.
BrandRocky Mountain Goods #ad
ManufacturerRocky Mountain Goods #ad
Part NumberRMG-ARG

9. HVAC Premium

#ad

Sidewall and Ceiling, White Outer Dimensions: 11.75"w X 11.75"h, 10"w X 10"h Steel Return Air Grilles, HVAC Duct Cover

#ad
HVAC Premium #ad - Carefully shrink wrapped With Cardboard Backing To Prevent Damage In Shipment. Easy unrestricted air flow for Your HVAC System - 50° angled to provide maximum airflow. High quality solid stamped steel with Counter-Sunk Screw Holes Screws Included and No Sharp Edges. 10"w x 10"h is the size for the duct opening measurement only, actual front end outer dimensions are 11. 75" width x "w X 11. 75" height - see below in description how to measure a gRILLE.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Weight1.1 Pounds
Part NumberMFRG1010W

10. HVAC Premium

#ad

White Outer Dimensions: 17.75"w X 11.75"h, 16"w X 10"h Steel Return Air Grilles, HVAC Duct Cover, Sidewall and Ceiling

#ad
HVAC Premium #ad - 16"w x 10"h is the size for the duct opening measurement only, actual front end outer dimensions are 17. 75" width x "w X 11. 75" height - see below in description how to measure a gRILLE. High quality solid stamped steel with Counter-Sunk Screw Holes Screws Included and No Sharp Edges. Carefully shrink wrapped With Cardboard Backing To Prevent Damage In Shipment. Easy unrestricted air flow for Your HVAC System - 50° angled to provide maximum airflow.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Height11.75 Inches
Length0.25 Inches
Width17.75 Inches
Part Number170 16X10
ModelCECOMINOD080438