As an Amazon Associate I earn from qualifying purchases.
Straight regular cuthurricane 10 inch Aviation Tin Snips, Cuts straight and wide curves to the left and right, ensure a secure hold and precise cuts. Safety and high efficiencylocking latch prevents damage to cutting edge when stored.

Wide application: cutting thickness range up to 1. 2mm carbon steel and 07mm stainless steel, keel, fine, keel, square steel pipe, you can cut these for metal wire, aluminum, sheet metal, etc. High quality material: made from high-quality cR-V steel.

We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects. Materialsurface sandblasting, heat treatment strength and durability, forged high-carbon high-quality steel, cuts up to 20-gauge cold-roll steel and 22-gauge stainless-steel.

These metal cutter scissors are professionally made in China. Built to last: these snips for sheet metal undergo a special heat treatment process which allows them to stand up to the harshest conditions.
Our steel strap cutter’s ergonomic handle snip design reduces fatigue from extended use. Heavy duty original snip metal cutting tool that cuts steel sheet with ease. Heavy duty chrome molybdenum tin snips: our aviation snips are made with precision cast heat treated chrome molybdenum steel for maximum metal cutters tool and cut life. Like a hot knife through butter: we designed these tin snips for cutting metal sheet.

Straight blade: the blade is straight and is suitable for cutting metal in a straight line. Spring-loaded handle: the handle has a spring that can be stored when not in use. It has a powerful sharpness not found in other scissors. Powerful sharp japanese steel blade: The blade is made of forged Japanese carbon steel.

Right aviation snip :this aviation snip cuts straight and on tight right curves, and designed for left-hand use in confined and overhead spaces.


Non-slip handle with large loops makes it easy to work with gloves. The antirust oil may be appeared on the tools, it will not affect the function, just wipe it clean with a duster cloth. We value every single customer feedback, always friendly customer service behind SPEEDWOX products, 100% MONEY BACK guarantee.

Spring action for fast, effortless feed. Handles have built in stops providing consistent operation and blade opening. Free float design on the pivot bolt provides longer life.

Strongest handles - high tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power. Cuts stainless steel - special hardness models are recommended for cutting extremely hard materials such as stainless steel, inconel and titanium.
1. HURRICANE
#ad
Straight Cut, Hurricane 10 Inch Aviation Tin Snips, Chrome Vanadium Steel, Heavy Duty Metal Cutter for Cutting Sheet Metal
#adHURRICANE #ad - Cut capacity of tin snip with a cutting thickness range up to 18 gauge 1. 2mm cold-rolled steel sheet, 18 gauge 1. 2mm galvanized sheet, and 22 gauge 07mm stainless steel.Straight regular cuthurricane 10 inch Aviation Tin Snips, Cuts straight and wide curves to the left and right, ensure a secure hold and precise cuts. Safety and high efficiencylocking latch prevents damage to cutting edge when stored.
More information #ad
Comfortable gripsErgonomical Tyregrip Handle with rubberized grip for comfort and control. Longest lasting edgechrome vanadium Steel, Serrated edge blades with sanding finish for maximum strength, durability, and long lifetime. Spring-assisted latch on metal snips for fast one-handed operation.Brand | HURRICANE #ad |
Manufacturer | Jiangsu Sainty Sumex Tools Co Ltd #ad |
Height | 1.5 Inches |
Length | 10 Inches |
Width | 3 Inches |
Part Number | 02-024 |
More information #ad
2. TOOLEAGUE
#ad
Heavy Duty Metal Cutter Long Straight Cut 12 inches Metal Shears, TOOLEAGUE Aviation Tin Snips for Cutting Metal Sheet Tin Cutting Shears with Forged Blade
#adTOOLEAGUE #ad - After multiple tests, the non-slip grip is easier to use and more stable. Package content:Item includes 1 x tin snips long straight cut. With overall heat treatment, higher hardness, and long lifetime.Wide application: cutting thickness range up to 1. 2mm carbon steel and 07mm stainless steel, keel, fine, keel, square steel pipe, you can cut these for metal wire, aluminum, sheet metal, etc. High quality material: made from high-quality cR-V steel.
More information #ad
It’s safe and easy to do work! Easy cutting-compound leverage multiplies handle force to cutting blades by 7:1 for significantly less fatigue. The compound action snip has a durable structure, sharp tooth tip, and easy cutting. It’s easy to open and close for a conventional security system. Safe &high efficiency: the metal safety lock is between the strong handles. Serrated cutting edges prevent materials from slipping during use.Brand | TOOLEAGUE #ad |
Manufacturer | TOOLEAGUE #ad |
Weight | 1 Pounds |
Part Number | 2 |
More information #ad
3. TOOLMAK
#ad
Tin Snips TOOLMAK 10 Inch Straight Pattern Tinners Snips with Comfort Grip Sheet Metal Cutting Shears Heavy Duty
#adTOOLMAK #ad - Satisfaction guaranteedat toolmak tools we stand by the quality construction and durability of all our products. Designhigh quality hot drop-forged flat blade that cuts straight and wide curves for maximum cutting efficiency and accuracy.We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects. Materialsurface sandblasting, heat treatment strength and durability, forged high-carbon high-quality steel, cuts up to 20-gauge cold-roll steel and 22-gauge stainless-steel.
More information #ad
Non-slip handle with large loops makes it easy to work with gloves. Wide applicationsuitable for cold-rolled steel sheet, stainless steel plate, plastic sheet etc. Size10" tin snip10 x 4. 7 x 06 in, flat blade straight-pattern snips, orange handle with rubberized grip for comfort and control.Brand | TOOLMAK #ad |
Manufacturer | NBHM Ltd #ad |
Height | 1.18 Inches |
Length | 12.2 Inches |
Width | 3.9 Inches |
Part Number | TMK19208 |
More information #ad
4. AMERICAN MUTT TOOLS
#ad
Sheet Metal Shears Tin Snips for Cutting Metal Sheet, AMERICAN MUTT TOOLS Heavy Duty 10 Inch Straight Cut Tin Snips – CrMo Sheet Metal Cutter – Aviation Snips for Sheet Metal – Sheet Metal Snips
#adAMERICAN MUTT TOOLS #ad - The safety latch keeps the sheet metal snips closed and compact for storage when not in use. Ergonomic: give your hands the break they deserve. Limited lifetime manufacturer warranty: these hvac snips tools are backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind.These metal cutter scissors are professionally made in China. Built to last: these snips for sheet metal undergo a special heat treatment process which allows them to stand up to the harshest conditions.
More information #ad
These sheet metal cutters have a powerful spring action and precision ground serrations that help cut up to 18 gauge sheet steel and 20 gauge sheet stainless steel. The metal shears for cutting sheet metal use compound leverage allowing you to cut wire mesh with one hand. Our steel strap cutter’s ergonomic handle snip design reduces fatigue from extended use. Heavy duty original snip metal cutting tool that cuts steel sheet with ease. Heavy duty chrome molybdenum tin snips: our aviation snips are made with precision cast heat treated chrome molybdenum steel for maximum metal cutters tool and cut life. Like a hot knife through butter: we designed these tin snips for cutting metal sheet.
Brand | AMERICAN MUTT TOOLS #ad |
Manufacturer | American Mutt Tools #ad |
Part Number | TH103-102 |
Warranty | Limited Lifetime Manufacturer Warranty |
More information #ad
5. ALLEX\アレックス
#ad
Black, Straight Blade/Straight Cutting, ALLEX Sheet Metal Cutter Straight Cut 9.5 Inch, Japanese Steel Metal Shears Heavy Duty Spring Loaded, Made in JAPAN
#adALLEX\アレックス #ad - Heavy duty japanese tin snips: it is a sturdy metal cutting tool. Made in japan. You can cut various kinds of metal sheets such as galvanized iron, copper, tinplate, and aluminum plate.Straight blade: the blade is straight and is suitable for cutting metal in a straight line. Spring-loaded handle: the handle has a spring that can be stored when not in use. It has a powerful sharpness not found in other scissors. Powerful sharp japanese steel blade: The blade is made of forged Japanese carbon steel.
More information #ad
Since it supports opening and closing work, you do not easily get hand fatigue, and work efficiency is improved. Even metals that cannot be cut with general hand shears can be cut reliably with a minimum of force. Overall length: 9. 5" / blade Length: 2. 1" / weight 6. 17 oz. It is a convenient hand tool just by putting one in your tool box.Brand | ALLEX\アレックス #ad |
Manufacturer | ALLEX #ad |
Weight | 0.39 Pounds |
Part Number | SH-5 |
Model | SH-5 |
More information #ad
6. YUN CHANG
#ad
Aviation Tin Snips Right Aluminum Snips for Sheet Metal Cutter Metal Shears Metal Snips Heavy Duty
#adYUN CHANG #ad - Safe & high efficiency:the metal safety lock is between the strong handles. Shearing capacity : cuts 18ga cold rolled steel, and 22ga stainless, Serrated edge blades Non-slip. It' s safe and easy to do metal working! comfortable grips :grips conforms ergonomic, The tail of aviation shear is with suspension hole design, significantly less fatigue, the indented ribs prevent hand and finger slippage, which is easy to carry and store.Right aviation snip :this aviation snip cuts straight and on tight right curves, and designed for left-hand use in confined and overhead spaces.
More information #ad
Longest lasting cutting edge: precision cast molybdenum blades aviation snip with forged tooth-ripple blade serrations. Serrated cutting edges prevent materials from slipping during use. It' s easy to open and close for convenient security system. Spring-assisted latch auto-release for fast one-handed operation.Brand | YUN CHANG #ad |
Manufacturer | MaLuoQi #ad |
Height | 0.2 Inches |
Length | 1 Inches |
Width | 0.2 Inches |
Part Number | 202102233 |
More information #ad
7. szdealhola
#ad
12-inch Long Heavy Duty Sheet Metal Cutter Cutting Shears Tin Snips
#adszdealhola #ad - Cutting range: maxium 1. 2mm largo rolled iron, Maxium 07mm steel Plate. Straight blade design for general purpose metal shearing and cutting. Hardened and tempered Carbon blades. 12" 300mm full length, 700g weight.More information #ad
Brand | szdealhola #ad |
Manufacturer | szdealhola #ad |
Weight | 1.41 Pounds |
Part Number | snip12 |
Model | snip12 |
More information #ad
8. SPEEDWOX
#ad
SPEEDWOX 16 Inches Straight Pattern Snips Flat Blade Tin Snips Tinner's Snip with Comfort Grip Sheet Metal Cutting Shears Heavy Duty
#adSPEEDWOX #ad - Customer support backed by speedwox lifetime guarantee. Design high quality hot drop-forged straight pattern blade and the sharp edge for maximum cutting efficiency and accuracy.Non-slip handle with large loops makes it easy to work with gloves. The antirust oil may be appeared on the tools, it will not affect the function, just wipe it clean with a duster cloth. We value every single customer feedback, always friendly customer service behind SPEEDWOX products, 100% MONEY BACK guarantee.
More information #ad
Usage flat blade snips are perfect for straight cuts. Dimension 424 x 137. 7 x 18. 4mm / l x W x H. Material drop forged high carbon steel and heat treated for strength and durability. Cutting up to 20 gauge low carbon steel. Ideal for cutting sheet metal, rubber, plastic, and other sheet materials.Brand | SPEEDWOX #ad |
Manufacturer | SPEEDWOX #ad |
Height | 0.72 Inches |
Length | 16.69 Inches |
Width | 5.42 Inches |
Part Number | ASTS16-420 |
Model | ASTS16-420 |
More information #ad
9. Wiss
#ad
Left and Right Cut, M3R, Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips, Straight
#adWiss #ad - Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel. Ergonomic, single material non slip handle grips provide excellent control and easy cleaning with built in hang hole for convenient storage.Spring action for fast, effortless feed. Handles have built in stops providing consistent operation and blade opening. Free float design on the pivot bolt provides longer life.
More information #ad
Blade serrations spread cutting force across jaws improving cut quality and tool life. Ergonomic, single handed latch operation for left or right handed use. Cuts straight and slight curves with yellow handles for quick identification. Superior design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs.Brand | Wiss #ad |
Manufacturer | CRESCENT #ad |
Height | 1 Inches |
Length | 9.75 Inches |
Weight | 0.75 Pounds |
Width | 3 Inches |
Part Number | M3R |
Model | M3R |
Warranty | Standard Limited Lifetime |
More information #ad
10. Midwest Snips
#ad
MWT-SS6510C, Left and Right Cut Offset Stainless Steel Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips, MIDWEST Aviation Snip
#adMidwest Snips #ad - A favorite of professional sheet metal tradesman and contractors. Longest lasting cutting edge - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability.Strongest handles - high tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power. Cuts stainless steel - special hardness models are recommended for cutting extremely hard materials such as stainless steel, inconel and titanium.
More information #ad
Comfortable grips - kush'n-power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage. Made in usa. 2 piece offset set - includes both left and right cut offset models.Brand | Midwest Snips #ad |
Manufacturer | Midwest Tool & Cutlery #ad |
Part Number | MWT-SS6510CNP |
Model | MWT-SS6510C-NP |
More information #ad