Top 10 LVP Installation Kit – Wood Flooring

As an Amazon Associate I earn from qualifying purchases.

1. MinliGUY


Tapping Block, Big & Weighted Floor Installation Block W/Handle No Hammer Required, for Laminate/Wood/Hardwood/LVT/LVP/Vinyl Plank Flooring, Heavy Flooring Tapping Tool -by MinliGUY

MinliGUY #ad - Heavy duty & easy to grasp 1beveled edges, made of solid HDPE. 2with ergonomical handle, speed up flooring installation without damage in proper way. Save effort& a safer tapping tool 1hammer free, avoid knocking fingers.

2use the own-weight inertia of the block to save your time and effort. Practical & good addition to tool kita must-have flooring installation tapping block for contractors, DIYers, and professional flooring installers. To make flooring installation quicker & easier. Easy to use, like having "third" hand mallet free, just holding this floor knock block to strike the floors with one hand, and the free hand can adjust tilt or do any other thing at the same time.

Durable & thicker-for most floors locking1 not easy to deform. 2with thickness up to 1. 5inch, the minliguy tapping block is fully adapted to install vinyl plank/laminate /floating/engineered plank or other regular floors.
BrandMinliGUY #ad
ManufacturerNull-MG #ad
Part Number‎MinliGUY-22-Q3

2. Dreyoo


Tapping Block Flooring Tools, Heavy Big Tapping Block Heavy Duty 60 oz Flooring Tools for Vinyl LVP LVT Flooring,15.75'' x 3.15'' Floor Tapping Tool with Big Handle for Vinyl Plank Flooring

Dreyoo #ad - A good assistant for replacing the floor: no need to hit the floor with a hammer, laminate or hardwood flooring planks together creating a tight seam, just one or two hits with the flooring tool can pushes the tongue and groove or edges of resilient vinyl tile, the tapping block can protect your hands, convenient and fast.

Big handle: the extra large handle is non slip and corrosion resistant, which allows you to grip and tap various floors more stably; It is fixed by screws and will hardly fall off, can be applied for a long time. Protect the floor: the laminate tool is wrapped with a layer of rubber; When LVT tapping block touches the edge of the floor, plank tapping block will have a buffering effect; It can protect the edge of the floor and prevent the edge from falling off while beating hard.

Adapt to all kinds of floors: the tap block is suitable for lvp floors, which can realize quick installation, LVT floor, laminate plank, vinyl plank, save time and effort, and improve work efficiency; It is an indispensable tool for DIY floor decoration. Large size: the vinyl plank flooring tool is 15. 75 x 3. 15 x 1. 18 inch large size, 4 pounds weight, allowing your floor to snap into the groove faster, large size will increase the contact area with the board, and big weight increase the impact force, improving efficiency.
BrandDreyoo #ad
ManufacturerDreyoo #ad
Weight4 Pounds
Part NumberDreyoo-Tapping-0333
ModelTapping Block Flooring Tools



Heavy Duty Pull Bar and Diameter 1 3/8" High-Strength Fiberglass Handle Mallet, Non Slip Soft Grip, REXBETI 43-Piece Laminate Wood Flooring Installation Kit with 40 Spacers, Tapping Block

REXBETI #ad - Double-faced solid rubber head delivers a softened, positive strike. Upgraded pull bar is designed with enhanced strength, more longger and thicker than others. Others are usually only 1/8 inch thick, 10 1/2 inch long and easily deformed.

Ours is 3/16 inch thick, 12 inch long is heavy duty. 2 soft pads on the back help to prevent scratching your floor during installation. Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers. It is professional use for laminate or hardwood flooring installation. 40 spacers included to allow you install a large flooring area more convenient and easier. Tapping block is made from solid polypropylene material, it is durable for long use, suitable for most types of floors.

The mallet head is 1 3/8 inch in diameterother brands usually is 1"that can provide more powerful force. The handle is made of fiberglass will not break, fell apart and handle bent. The whole mallet is 11 inch long and weighs 089lb. High-strength mallet with non-slip rubber grip help absorb vibration.
BrandREXBETI #ad
ManufacturerREXBETI #ad
Part NumberREX0909



Heavy Duty Pull Bar, WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Tapping Block and 30-Piece Spacers Included

WORKPRO #ad - The double-faced solid PVC head delivers a softened, positive strike. The handle is made of American hickory which is lightweight but tough. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality.

The mallet head is 1-3/8 inch in diameter. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The approximate size of the spacer 2-3/8 x 1-1/8 inch. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS. The soft pads on the back can well protect the floor from scratch. Enhanced pull bar: made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance.

The whole mallet is 10-3/4 inch long and weighs 1. 036lb. You are always welcomed to contact us for warranty service whenever there is any problem with the product. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. Solid tapping block: the tapping block made from polypropylene is designed solid, which is more sturdy and durable.
BrandWORKPRO #ad



Laminate Wood Flooring Installation Kit with Extra Strong Solid Tapping Block Heavy Duty Pull Bar Non Slip Soft Grip Double Faced Mallet 40 Spacers Included and 10 inch Duplicator Gauge with Lock

CARIB GEAR PRO #ad - Duplicate odd angles - copy odd-shaped angles and edges like a pro. If you're not happy with this set, let us know within 1 year of purchase so we can issue a refund. Customer satisfaction - this floor installation kit is backed by a Limited Lifetime Warranty.

The 10-inch duplicator gauge with lock is perfect for making accurate copies of curved corners, round edges, and tight trim angles. Built to last - you can expect all these flooring tools to stay in perfect shape for many years. Everything you need mallet upgraded august 2022 - be prepared for any DIY floor installation tasks with this kit. It comes with a rubber mallet, a 12" pull bar, 40 spacers, a solid tapping block, and a 10" contour gauge.

Install most kinds of flooring - this laminate flooring installation kit is a must-have for DIY or professional use. This set may be used for installing laminate, hardwood, vinyl, or tile floors. Each one shows off solid construction, giving you peace of mind that they can withstand heavy duty use.
ManufacturerCARIB GEAR PRO #ad
Part NumberCLWFIK-120219

6. Miraitowa


Double-Faced Mallet & 2 Replacement Mallet Head for Domestic & Professional Flooring Installation, Long & Wider Pull Bar, Laminate Wood Flooring Installation Kit with Solid Tapping Block, 40 Spacers

Miraitowa #ad - 45 in 1 setinclude 40 spacers, upgraded tapping block, widen pull bar, diameter 40mm heavy duty mallet and 2 Replacement Mallet Head. Widen edge & no sharp Edges design, Protect the Floor from Scratches. Wide applicationthe laminate wood flooring installation kit have solved the common problems, suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring, Ideal for domestic and professional use.

Double-faced solid rubber head delivers a softened, positive strike. Detachable mallet head design, with two Free Replacement Mallet Head, don’t worry original heads missing or damaged, make it use more longer. Allow you to install your laminate wood flooring more convenient and easier.

Solid tapping blockthe upgraded solid tapping block design, can withstand countless blows, more durable than hollow block. Upgraded pull bar12. 2 inch long, 4. 5mm thick upgraded pull bar is more longger and thicker than other, not easy to bend and deform. Detachable dual heads mallethigh-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration.
BrandMiraitowa #ad
ManufacturerGuangzhou Tongyan Trading Co., Ltd. #ad



Heavy Duty Pull Bar, Flooring Installation Kit, Vinyl Flooring Tools, Tapping Block with Handle, Reinforced Double-Faced Mallet, NAACOO Laminate Flooring Tools, 2 in 1 Spacers

NAACOO #ad - No any issue about the head of mallet fell apart and handle bent. Pull bar made from premium A3 steel with matt coating, the pull bar is designed with enhanced strength and corrosion resistance. Allow you to install your laminate wood flooring more conveniently and easier.

Meet your needs for larger gaps. Big triangle Design-stability stays in place. 2 in 1 flooring spacersour spacers are available in 2 sizes, 1/2”. Heavy duty pull bar 5mm thick and 12 inches long and made of high-strength steel, help to prevent damaging and scratching your plank during installation. The soft pads on the back can well protect the floor from scratch. This is a unique Kit on the market. The one side is a rubber hammer, the handle forged into the hammerhead, other side is a solid hammer, which is powerful to use and will not fall off.

Double-faced malletmade of high carbon steel with a non-slip rubber grip handle. Our spacers will not fall, slip, 1/4 inch and 1/2 inch, can install any wood flooring material requiring an expansion gap of 1/4", tip over and get stuck as easily as the thin spacers included in other sets. The approximate size of the block is 7 x 2-3/4 x 3/4in inches. With them, you can increase efficiency by at least 30%. Different from other suitsour spacers and tapping blocks are more advanced than other sets.
BrandNAACOO #ad
ManufacturerNAACOO #ad



LVT, MantisTol 13" Pro Vinyl floor cutter LVT-330 for LVP, SPC, PVC and Rigid Core Vinyl Plank.Best Buy!, VCT, WPC

MANTISTOL #ad - It can help you finish your work smoothly. Replacement blade can be got at the online official brand store MANTISTOL. Requires some skills and control your strength. Why does the floor you cut crack? because your floor must be rigid core vinyl plank (spc or rvp), which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.

If you want to cut it, each cut can only cut 1/16 inch, it is a stone-plastic composite material, which is equal to that each cut is the upper surface of the floor. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time!. Cutting unapproved materials will void warranty.

No dust, spc, no electricity needed, Save time. Design for cutting lvp, easy and professional cutting vinyl floor, PVC, VCT, No noise, lVT, wpc, Vinyl Plank Flooring.13" cutting width and 8mm cutting depth. There are many complex scenes on the construction site that need special cutting irregular corners,most of which are columns, door edges and wall corners. 0-45° angle cutting, translational cutting, the deep of the throat is 115mm/4. 5inch.
ManufacturerCutTool Ltd. #ad
Height14.6 Inches
Length23.6 Inches
Weight14 Pounds
Width15.5 Inches
Part NumberLVT

9. DasMarine


DasMarine 46 Pieces Laminate Wood Flooring Installation Kit with Double Headed Mallet,Pull Bar,Tapping Block,40 Spacers,2 Knee Pads and 1 Backpack

DasMarine #ad - It can be used to strengthen floor, also for solid wood compound floor installation. Easy use. Install your new laminate or hardwood flooring quickly, efficiently and accurately. Suitable for 027in 7mm - 06in 15mm flooring. Package include : 1x rubber tapping block, 2 x knee pads, 40 x spacers, 1x double headed mallet rubber & hard, 1x pull bar, 1xBackpack. Complete tool kit contains all the essentials you need, making your installation more convenient and easier.
BrandDasMarine #ad
ManufacturerDasMarine #ad
Part Number0535

10. Norske Tools


Norske Tools NMAP004 13 inch Laminate Flooring & Siding Cutter with Sliding Extension Table with Bonus Floor Installation Kit Great Value

Norske Tools #ad - Quiet and dust free! Includes 13” high speed steel blade. Sliding extension table supports longer boards 41" Working length. Laser etched table miter gauge for angled cuts.

28-1/2" handle for increased leverage. Bonus accessory kit includes pull bar, tapping block, 16 PVC inserts and mallet $30 value. Adjustable measuring gauge for quick repetitive cut. Heavy duty 22” aluminum fence and reinforced table top for added strength and durability. 13" cutting capacity. Cuts a variety of material, cemplank, including laminate flooring, fiber cement board HardiePlank, engineered wood and vinyl siding up to 13” wide and 19/32” thick.
BrandNorske Tools #ad
ManufacturerNorske Tools #ad
Height3.5 Inches
Length29 Inches
Width15 Inches
Part NumberNMAP004
WarrantyNo Guarantee