As an Amazon Associate I earn from qualifying purchases.
MILDWOO #ad - 1/4"-20 unc thread fits most of Made in USA furniture feet. Each package contains 20pcs leveling foot adjuster. Size: 1/4"-20 unc thread, it's a common size for most of made in usa furniture feet. Thread shaft is 071"18mm long, and the diameter of the round base is 061"15.
5mm. Attention: please choose the correct replacement size before purchase. Read the size specification Picture can help you determine a suitable size. Material: threaded studs are made from galvanized steel with black PP non-skid base.
Keeps your furniture and floors from being scratched and damaged, also can reduces noise while moving furniture. Widely used in furniture, tables, boxes, chairs, desks, hardwood, TV cabinets, various other furniture. Easy to use: screw in leveler to the height you desire to level your chairs and tables. Make sure you order the correct size to fit your furniture. Your local hardware store can help you identify the correct replacement size.
Anwenk #ad - Or, screw in the Levelers and adjust to the desired height. Heavy duty and high quality- commercial quality standard furniture levelers, T-nuts and thread insert are made of stainless steel that support over 100lbs per feet, so a set of four can support furniture over 400lbs! Adjustable furniture levelers- 1” long steel insert with 1/4”-20 thread; 1/2” thick base with high density felt;Sturdy 1” Diameter Base and Fully Adjustable Height from 05” to 1.
25” for maximum Support and Adjustability.
No more folded up cardboard under table legs! these furniture leg levelers with felt allow easy leveling of furniture at home, school or café, office, restaurant, to match in same height, and allows raising your furniture. Easy installation- for furniture legs with existing 1/4”-20 thread, pre-drill a 5/16” hole and insert the t-nut for universal installation, simply screw in the leg leveler to adjust the height.
ANhovno #ad - Leg levelers friendly to ceramic tile floor, marble floor, hardwood floor, and carpets. Table leg levelers enable a height adjustment of 1. 19". 1/4" screw & 3/8" nut furniture leveling feet diameter: 1/4" screw; 3/8" nut.
Totally 20 set adjustable feet for furniture, can meet your demands. 1. 19" height adjustment table leveling feet height: screw length: 079in; base height: 04in.
Chair leg floor protectors adjustable feet for furniture come with non slip rubber furniture pads, protect the floor from being scratched, reduce friction and noise. Wide application heavy duty leveling feet can fit most USA furnitures such as tables, couches, cabinets, chairs, desks, and beds.
Anwenk #ad - Or, pre-drill a 5/16” hole and insert the t-nut for universal installation, screw in the Levelers and adjust to the desired height and angle. Easy installation- for furniture legs with existing 1/4”-20 thread, simply screw in the leg leveler to adjust the height.
They allow raising your furniture, restaurant, and help slide your furniture at ease! Swivel leveling for both straight legs or legs with angle. Comes with separate high density thick felt for hardwood floor to prevent scratches or harsh noises.
Strong load-bearing capacity- commercial quality swivel furniture levelers, each support over 80LBs. Angle height adjustable- swivel leg feet allows you to adjust the furniture feet height from 1/2 to 1 inch for maximum support and adjustability, and angle to the floor from 90° to 70°.
HUAYY #ad - Furniture pads or furniture Levelers. Durable high density felt. Felt chair Glides work great on wood floors. Protects wood floors and provides a quiet sliding surface. This can be used as replacement feet or install in wood furniture leg by drilling a 5/16 inch hole and inserting t-nut.
K-DUB supply #ad - The felt itself is high density, durable, and built to last. 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Maximum height: 1. 25". Minimum height: 05". If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND.
The long-lasting felt is 1/4 inch thick. This product is recommended by furniture manufacturers and installers. Each package will include 8 furniture levelers with felt bottoms as well as 8 heavy duty T-prong Nuts for installation.
Protection-dependability, and customer satisfaction were first on our minds when manufacturing this product. Each purchase includes-this is a pack of 8 furniture leveling feet. When installed, a piece of furniture with four legs can now support up to 400 pounds. Thread size is 1/4-20 and threads are one inch long. Felt bottoms are strongly bonded to the leveler and will not rip off when you slide or move furniture like normal felt pads.
tamu #ad - Super strong !the furniture feet are 100% guaranteed to resist and bending or flexing under load, Made of 100% Solid Steel and Thick High-Density Felt. Sturdy 1” foot Diameter and Fully adjustable from 05” to 1” for maximum support and adjustability.
Or pre-drill a 5/16” hole and insert the t-nut for installation, screw in the Levelers and adjust to the desired height. Easily install- for furniture legs with existing 1/4”-20 thread, simply screw in the leg leveler to adjust the height.
The high density felt floor protectors-can protect your hardwood floor from scratches or harsh noises which works far better than the stick-on pads! As well as a smooth and quiet glide across the wood, tile, and linoleum flooring. Heavy duty -each foot can support about 100 lbs, so a set of 4 can support furniture about 400 lbs!And Felt bottoms are strongly bonded to the leveler and will not rip off when you slide or move furniture like normal felt pads.
MILDWOO #ad - The smooth surface protects the floor from scratches, also reduces noise when moving the furniture. Universal levelers - 1/4"-20 unc threaded furniture feet fit most of Made in USA furniture. Easy to install – follow the installation steps to install, drive the insert into the hole with a hex key, drill a hole longer than 1.
5” in the furniture leg, screw the leveler with hex nut to the height you want and secure the hex nut with a wrench finally. Refer to the size comparison diagram below to determine which one you need.
Adjustable height – the adjustable table feet can be adjusted from 054” to 1. 65”, you can adjust them to the height you desire easily. Wide applications – the feet for furniture are suitable for various furniture, including table, bed, stool, TV stand, feel free to contact us, cabinet, sofa, night table, couch, patio furniture, etc. Especially for uneven furniture, this leveling feet can make it become stable again with just a little budget.
1. MILDWOO
#adFurniture Legs, 20 pcs Pack, Chair, Galvanized Steel Screw Foot Levelers Screw On Furniture Glide Leveling for Table, 1/4" UNC Thread Adjustable Furniture Levelers Screw in Threaded
#ad5mm. Attention: please choose the correct replacement size before purchase. Read the size specification Picture can help you determine a suitable size. Material: threaded studs are made from galvanized steel with black PP non-skid base.
More information #ad
Wide application: suit for all types of floors including wood, bathroom cabinets, shoe cabinets, chests, tile, laminate, washing machine heightening, tea machines, carpet. M6 thread is a common size for furniture feet which is Made in China. Keeps your furniture and floors from being scratched and damaged, also can reduces noise while moving furniture. Widely used in furniture, tables, boxes, chairs, desks, hardwood, TV cabinets, various other furniture. Easy to use: screw in leveler to the height you desire to level your chairs and tables. Make sure you order the correct size to fit your furniture. Your local hardware store can help you identify the correct replacement size.
| Brand | MILDWOO #ad |
| Manufacturer | MILDWOO #ad |
| Height | 1.07 Inches |
| Length | 0.74 Inches |
| Width | 0.74 Inches |
| Part Number | 85623023 |
| Model | RL14-2 |
More information #ad
2. S-D-S Furniture
#adTable Legs Furniture Feet Chair Glides Adjustable Legs Nylon Base 4 Pack 1/4-20 Foot Levelers Leveling Feet Furniture Levelers Feet for Furniture Table Leg Levelers Heavy Duty Super-Deals-Shop
#adS-D-S Furniture #ad - Diameter of the base is 1-1/8". Four pieces of furniture glides in a PACK Non-Swivel with Nylon Base protectors. Height of base is 17/32". Threaded length is 1". 1/4-20 threaded Leveling Foot with hex adjustment.More information #ad
| Brand | S-D-S Furniture #ad |
| Manufacturer | imported #ad |
More information #ad
3. Anwenk
#ad1/4-20x1" Threaded Shank T-Nuts,12 Pack, Anwenk Furniture Levelers Adjustable Furniture Feet Leveling Table Chair Levelers T-Nut Leg Levelers with High-Density Felt
#ad25” for maximum Support and Adjustability.
More information #ad
Comes with Installation Instruction. High density felt floor protectors - pre-installed with high density thick felt to protect your hardwood floor from scratches or harsh noises which works far better than the stick-on pads. No more folded up cardboard under table legs! these furniture leg levelers with felt allow easy leveling of furniture at home, school or café, office, restaurant, to match in same height, and allows raising your furniture. Easy installation- for furniture legs with existing 1/4”-20 thread, pre-drill a 5/16” hole and insert the t-nut for universal installation, simply screw in the leg leveler to adjust the height.
| Brand | Anwenk #ad |
| Manufacturer | Anwenk #ad |
More information #ad
4. ANhovno
#adLeveling Feet Furniture Levelers with Floor Protectors 20 Set,Adjustable Furniture Feet Screw in Leg Leveler with 1/4" Screw 3/8" Nut,Table Levelers Adjustable with Rubber Pads for Hardwood Floor
#adTotally 20 set adjustable feet for furniture, can meet your demands. 1. 19" height adjustment table leveling feet height: screw length: 079in; base height: 04in.
More information #ad
Can also be used for outdoor furniture such as benches. Easy operation mark the center of furniture feet first; drill a 3/8" hole with appropriate depth; tap the T-nut in; screw the adjustable legs in to adjust the height. Chair leg floor protectors adjustable feet for furniture come with non slip rubber furniture pads, protect the floor from being scratched, reduce friction and noise. Wide application heavy duty leveling feet can fit most USA furnitures such as tables, couches, cabinets, chairs, desks, and beds.
| Brand | ANhovno #ad |
| Manufacturer | ANhovno #ad |
| Part Number | FI-Screw |
| Model | S-20 |
More information #ad
5. Anwenk
#adScrew in Cabinet Table Chairs Sofa Levelers Leg 1/4”-20 Threaded,with Felt, 8Pack, Anwenk Swivel Leveling Feet Furniture Levelers Feet Angle Height Adjustable
#adThey allow raising your furniture, restaurant, and help slide your furniture at ease! Swivel leveling for both straight legs or legs with angle. Comes with separate high density thick felt for hardwood floor to prevent scratches or harsh noises.
More information #ad
Excellent quality swivel leveling feet- allow easy leveling of furniture at home, school or café, to match in same height, office, prevent furniture shaking. A set of eight can support furniture 640lBs! For all floors- non-slip nylon bottom is made of hard plastic, work for all floors such as hardwood/tile/carpeting floors without scratches. Strong load-bearing capacity- commercial quality swivel furniture levelers, each support over 80LBs. Angle height adjustable- swivel leg feet allows you to adjust the furniture feet height from 1/2 to 1 inch for maximum support and adjustability, and angle to the floor from 90° to 70°.
| Brand | Anwenk #ad |
| Manufacturer | Anwenk #ad |
| Height | 1.1 Inches |
| Length | 5.5 Inches |
| Width | 3.5 Inches |
| Part Number | swivel leveling feet |
| Model | Furniture Leveling Feet |
More information #ad
6. Magic Hub
#adFurniture Levelers 1/4-20, Heavy Duty Adjustable Leg Leveling Glides for Furniture, Screw on Furniture Glide Leveling Foot Adjuster for Furniture Legs, White Nylon Leveling Feet 1/4-20
#adMagic Hub #ad - Dimension: threaded length is 1", height of base is 17/32" and the diameter of the base is 1-1/8". Heavy duty adjustable leg leveling glides for Furniture - Easy to install of it and adjustable height as your require. Package include: 8 x White Nylon Leveling Feet for Furniture.More information #ad
Threaded leveling legs, furniture Leveling Feet 1/4-20 thread - threaded leveling foot with hex adjustment. Screw on furniture glide leveling foot Adjuster for Furniture Legs - Nylon round base ideal protect the feet and floor to keep it tidy and beauty. Adjustable Furniture Feet support uneven furniture legs.| Brand | Magic Hub #ad |
| Manufacturer | Imported #ad |
More information #ad
7. HUAYY
#adHUAYY Medium Duty Furniture Levelers Adjust Legs,Table and Chairs Leveling Feet|Height Adjustable Protection Integrated High-Density Felt Pads|Heavy Duty 1/4-20x1" Threaded Shank T-NutsSet of 24
#adMore information #ad
When installed minimum height is 1/2 inch and maximum height is 1 inch. Thick gray felt pad is 1/4 inch thick and a full one inch in diameter. Heavy duty - each foot can support 100 lbs so a set of four can support a 400 lb piece of furniture.| Brand | HUAYY #ad |
| Manufacturer | HUAYY #ad |
| Weight | 0.79 Pounds |
| Part Number | 43237-2 |
More information #ad
8. K-DUB supply
#adChair, Furniture Levelers- Adjustable felt-bottomed pads for table, and furniture legs-Pack of 8 with durable metal T-nut-Heavy Duty threaded furniture glides- Hardwood floor protectors- leveling feet
#adThe long-lasting felt is 1/4 inch thick. This product is recommended by furniture manufacturers and installers. Each package will include 8 furniture levelers with felt bottoms as well as 8 heavy duty T-prong Nuts for installation.
More information #ad
Each leveler can be adjusted 3/4 inch in height. Dimensions and details-the base measures 1" in diameter. Heavy duty-each leveler foot can support up to 100 pounds. Protection-dependability, and customer satisfaction were first on our minds when manufacturing this product. Each purchase includes-this is a pack of 8 furniture leveling feet. When installed, a piece of furniture with four legs can now support up to 400 pounds. Thread size is 1/4-20 and threads are one inch long. Felt bottoms are strongly bonded to the leveler and will not rip off when you slide or move furniture like normal felt pads.
| Brand | K-DUB supply #ad |
| Manufacturer | K-DUB Supply #ad |
| Height | 2.2 Inches |
| Length | 3.2 Inches |
| Width | 2 Inches |
| Part Number | 761856517936 |
| Model | 8pk |
More information #ad
9. tamu
#adFurniture Levelers, 1/4-20 -Pack of 4, Adjusting Furniture Feet Leveling Felt Pads with High-Density Felt for Chair Legs and Table Leveling Feet
#adOr pre-drill a 5/16” hole and insert the t-nut for installation, screw in the Levelers and adjust to the desired height. Easily install- for furniture legs with existing 1/4”-20 thread, simply screw in the leg leveler to adjust the height.
More information #ad
Stop folded up cardboard under table legs! the furniture leg leveler with felt allow easy leveling of furniture at home, office, restaurant, school to match in same height, and allows raising your furniture!. The high density felt floor protectors-can protect your hardwood floor from scratches or harsh noises which works far better than the stick-on pads! As well as a smooth and quiet glide across the wood, tile, and linoleum flooring. Heavy duty -each foot can support about 100 lbs, so a set of 4 can support furniture about 400 lbs!And Felt bottoms are strongly bonded to the leveler and will not rip off when you slide or move furniture like normal felt pads.
| Brand | tamu #ad |
| Manufacturer | tamu #ad |
More information #ad
10. MILDWOO
#adScrew in Leg Levelers Replacement for Table, Adjustable Leveling Feet for Outdoor Furniture, 1/4" UNC Thread Furniture Levelers 20 Pack, Chair, Patio Furniture, Cabinet
#ad5” in the furniture leg, screw the leveler with hex nut to the height you want and secure the hex nut with a wrench finally. Refer to the size comparison diagram below to determine which one you need.
More information #ad
Protect the floor – the chair leg extenders are made of ptfeteflon base and carbon steel screw, very stable and durable to use. If there are any problems, chair, desk, end table, we will give you a satisfying reply within 24 hours. Adjustable height – the adjustable table feet can be adjusted from 054” to 1. 65”, you can adjust them to the height you desire easily. Wide applications – the feet for furniture are suitable for various furniture, including table, bed, stool, TV stand, feel free to contact us, cabinet, sofa, night table, couch, patio furniture, etc. Especially for uneven furniture, this leveling feet can make it become stable again with just a little budget.
| Brand | MILDWOO #ad |
| Manufacturer | MILDWOO #ad |
| Height | 1.84 Inches |
| Length | 1.1 Inches |
| Width | 1.1 Inches |
| Part Number | RL30-2 |
| Model | RL30-2 |
More information #ad
