Top 10 in Circuit ESR Capacitor Tester – Capacitance Meters

As an Amazon Associate I earn from qualifying purchases.

1. GME


Capacitance Meter, GME Professional in Circuit ESR Capacitor Tester, Designed and Engineered in the USA

GME #ad - Intelligent design esr capacitor tester automatically discharges capacitor under test; Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds; Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters.

Designed and engineered in the usa gme professional in circuit esr capacitor tester designed and supported in the USA; compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty. Wide range in-circuit esr & dcr testing tester meter measures esr equivalent series Resistance on capacitors range from 047µf to 2200µf, in or out of circuit.

Easy to use, portable, and rugged design easy one-handed tweezers with gold plated tips and extra-long cable; Non polarity dependent test probe, eliminates the need for polarity checking. Accurate microprocessor controlled microprocessor generated 100 khz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components.
BrandGME #ad
ManufacturerGME Technology Inc #ad
Part Number236

2. Signstek


Support in Circuit Testing, Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor/Low Ohm Meter Up to 0.01 to 100R

Signstek #ad - Using true 100 khz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer. Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check. Auto-ranging capacitor ESR and Low Ohm Meter. Wide measurement Range. Measuring range from 0001 to 1000r, support in ciRCUIT Testing.
BrandSignstek #ad
ManufacturerSignstek #ad
Part NumberUS-171024-02

3. Geevorks


MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

Geevorks #ad - We can in circuit testing the capacitor is good or not. Note:the capacitance meter is used for testing the internal resistance of the capacitor, not for testing capacitance value. Our esr meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.

This mesr-100 v2 auto-ranging capacitor esr and low Ohm meter measuring range is 0001-1000r, support in circuit testing. Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check. Equipped with a SMD alligator clip for more accurately testing.

When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition. It is the series resistance inside the capacitor, and 100khz is used to remove the impedance 1/2*pi*F*C. During repairing tv, lcd, audio board, etc.
BrandGeevorks #ad
ManufacturerGeevorks #ad
Part NumberBQD5897187052736LW



Digital SMD Tester 6000 Counts SMD Meter Handheld Resistance Capacitance Tester LCR Meters with Spare Test Leads and Pocket Case Battery Included

AOPUTTRIVER #ad - Automatic led testingtest Voltage up to 25VOthers brand2. 5v only. One hand useEasy operation, full set of shortcuts. Ultra precise gold plated pliersHigh quality pliers offer accuracy data and long lifetime. Wide measurement ranger: 01Ω to 60mΩ / c: 01pf to 99. 99mF. Multi functionresistance, Capacitance, DC Voltage, Diode and Continuity Buzzer.
ManufacturerAOPUTTRIVER #ad
Part NumberAP-990C

5. Geevorks


Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, MESR-100 Capacitor Tester, Auto-Ranging Ohm Meter with SMD Test Clip

Geevorks #ad - Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check. Our esr meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test.

This mesr-100 auto-ranging capacitor esr and low Ohm meter measuring range from 0001 to 1000r, support in circuit testing. Note:the capacitance meter is used for testing the internal resistance of the capacitor, not for testing capacitance value. Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/2*pi*F*C. The impedance become small, and we can then measure the true series resistor value.
BrandGeevorks #ad
ManufacturerGeevorks #ad
Weight0.31 Pounds
Part NumberUCE9206712989901AO



Transistor Tester, Mega328 NPN PNP Transistor Diode Resistor Inductor Capacitance MOS SCR ESR Meter Automatic Checker Detector, DROK Mosfet Transistor Capacitor Tester

DROK #ad - Automatical identification: drok intelligent transistor checker is able to detect NPN and PNP transistors, thyristors, diodes, resistors, N-channel and P-channel MOSFET, capacitors or other devices automatically.

There is shutdown countdown displayed on the monitor and the shutdown countdown time can be extended to 40s. Auto shut-down function: our advanced electronic transistor tester owns auto shut-down function. Besides, different parameter is shown with different color, convenient and simple for you to check the parameter. Large & clear lcd digital display: this amazing detector adopts 1.

8" tft color lcD screen with high-resolution. Wide application: this multifunctional capacitance meter can be used to test triode, inductor, resistor, field-effect tubeFET, SCR, diode, capacitor, MOS, which is available for various electric transistor testing. Battery powered: this monitor is powered by DC9V battery not included.
BrandDROK #ad
ManufacturerDROK #ad
Part Number300427



ACEIRMC LCR-TC1 Multi-Function Tester Colorful Display Pocketable Multifunctional TFT Backlight Transistor 1.8 inch for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET LCR-TC1

ACEIRMC #ad - Use 12864 liquid crystal display with green backlight. Support Chinese and English. For detecting npn and pnp transistor, resistor and capacitor and other components, capacitor, JFET, IGBT, diode, resistor, triac and battery, N-channel and P-channel MOSFET, triode, etc.

Measurement results represent by TFT graphic display160x128. After detection, if the detector successfully decode it, align the infrared remote control with the "IR" light, then press the button in the remote control, it will display the data code and infrared wave form. One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
BrandACEIRMC #ad
ManufacturerACEIRMC #ad
Part Number16543

8. Fluke


Continuity and Current Tester, Fluke T5600 Electrical Voltage

Fluke #ad - Optional holster attaches to a belt and neatly stows test leads. Can stay connected much longer than solenoid type tester. Automatically measures volts ac and volts dc with precise digital resolution. Displays resistance to 1000Ω. Easy and accurate OpenJaw current measurement.
BrandFluke #ad
ManufacturerFluke #ad
Height2 Inches
Length11 Inches
Weight0.78 Pounds
Width3 Inches
Part NumberT5600
ModelT5-600 USA
WarrantyTWO YEAR

9. Luo ke


Honeytek A6013L Capacitor Tester

Luo ke #ad - Auto discharge for capacitors below 1000V. 9 measuring ranges from 200pF to 20mF. Lsi-circuit provides high reliability and durability. Lcd display with Back Light. Zero adjustment for compensation of measuring.
BrandLuo ke #ad
ManufacturerHoneytek #ad
Weight0.62 Pounds
Part NumberCECOMINOD047803

10. Sperry Instruments


Yellow & Black, Electrical AC Voltage Detector, Sperry Instruments STK001 Non-Contact Voltage Tester VD6504 & GFCI Outlet / Receptacle Tester GFI6302 Kit

Sperry Instruments #ad - Rated: cat rating iii 300v, iv 600v, c-ul us gfi6302, cat rating iii 1000v, vd6504 10 ft drop and 250 lb Crush GFI6302 and VD6504. Circuit sensing: non-contact sensitivity detects 50-1000V AC and patented battery self-test feature VD6504.

Audible and visible indicator: 360° visual and beeping audio Non-Contact Voltage Detection VD6504. Durable: hi-impact resistant abs housing with soft over-molded rubber grips with a compact ergonomic design GFI6302 and VD6504. Quickly read: bright color-coded neon lights for easy visual indication GFI6302. Verifies voltage presense: verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting GFI6302 and VD6504.
BrandSperry Instruments #ad
ManufacturerGardner Bender #ad
Height9 Inches
Length2 Inches
Weight0.3 Pounds
Width6 Inches
Part NumberSTK001