Top 10 Gx24q to E26/E27 Lamp Base Adapter – Light Sockets

As an Amazon Associate I earn from qualifying purchases.

1. E-Simpo

#ad

10pcs E-Simpo 4Pin Gx24q CFL to E26/E27 Lamp Base Socket Adapter Converter. Need Rewire to Bypass Ballast. 10-Pack

#ad
E-Simpo #ad - So the best thing is bypass or remove once we want to change CFL to LED Lamp. Consult an electrician if you are unsure. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. When we remove pin-based cfl, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.

Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. Ballast is a must to start a high voltage600v-1500v 1ms to light up the cfl, so 600-1500v will be too high, but it is dangerous for LED Lamp. There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast.

So the led driver input should be 100v-240v or 85-265v, like gX24Q G24 GX23 G23 are lamp-ballast separated, and easily destroy the led lamp. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. The ballast in your fixture must be removed or bypassed for these adapters to function properly. All pin-based cfl, but all screw-in e26 e27 are lamp-ballast integrated. This is 4p, otherwise, not for 2p;need bypass or remove the ballast, it doesn't light on.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height2.3 Inches
Length1.5 Inches
Weight0.05 Pounds
Width1.5 Inches
Part NumberGX24Q-E26

2. E-Simpo

#ad

Must Bypass Ballast to Avoid Flick Smoke Burn 6pcs E-Simpo 4Pin Conductive Gx24q to E26/E27 Lamp Base Adapter Short G24q to Medium Edison Light Socket Converter Replace CFL PL GX24Q Holder

#ad
E-Simpo #ad - But no led driver can be compatible with all ballast. Ballast is there consuming power, So the Professional doing is bypass it. So the led driver input should be 100v-240v or 85-265v, like gx24q g24 gX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated.

Because led lamp are built with leds and driver which is transforming the 100-240v ac to dc for leds. This is 4p short 15. 5mm gx24q base, not for 2p;not for diy!!! need rewiring/bypass/ remove the ballast, two red and two blue output side. There are led bulbs with driver compatible with the ballast, which you may find work without bypass ballast. All pin-based cfl is ballast-lamp separated, cause high temperature which will damage LED Bulb, E26/E27 bulbs are self-ballast. To bypass this ballast, and connect 2 red to black, the Ballast has a black and white wire on the input side, cut all the Input and output wires, 2 Blue to White wire.

Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. The ballast in your fixture must be removed or bypassed for these adapters to function properly. Ballast is a must to start a high voltage600V-1500V 1ms to light up the CFL, and easily destroy the led lamp. All pin-based cfl, so 600-1500v will be too high, but it is dangerous for led lamp. Consult an electrician if you are unsure.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q to E26/E27 Adapter

3. Bonlux

#ad

Bonlux 6-pack Gx24q to E26/E27 Socket Adapter, Gx24 Short 4 Pin to Medium Edison Lamp Base Converter, Rewire/Remove/Bypass the Ballast is Required

#ad
Bonlux #ad - Do not operate the led bulb with a ballast in the fixture. The base depth of this product is 15mm/059 inches. It has the short version 4-pins and is suitable and compatible with 4 pin g24q-1, GX24Q-2, G24Q-2, GX24Q-1, G24Q-3, GX24Q-3 Please confirm what base you need before you buy.

If there is a ballast connected at your fixture, please dismantle the ballast before install the LED light, otherwise the ballast will make resonance high voltage which can destroy the light. Doing so will likely cause the bulb flickering and EVEN SMOKING!! This lamp base converter doesn't change any voltage or current. Please consult an electrician if you are unsure. Note: it is 100% that PL-C downlight fixture has ballast inside.

Attention buyers: rewiring & removing/bypassing the ballast at the light fixture is required for these adapters to function properly. Save you a lot of troubles and money to replace your original Halogen CFL lighting fixtures. Easily transfer your gx24 fixture to fit any of the E26/E27 standard medium base light bulbs. Even you are replacing with e26/e27 cfl, you need to remove the ballast! Otherwise, the CFL E26/e27 Lamp will be flickering or not even turn on! .
BrandBonlux #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.04 Inches
Weight5 ounces
Width3.14 Inches

4. PHITUODA

#ad

4 Pin Bulb Base Converter LED Accessories, Rewire/Remove/Bypass the Ballast is Required, NOT PLUG AND PLAY, Gx24q to E27 Lamp Base Holder, PHITUODA 4pcs Gx24q to E26/E27 Socket Adapter

#ad
PHITUODA #ad - Warmly notes: in order for these adapters to work properly, the ballast in the luminaire must be removed or bypassed. Widely application: our socket converter is suitable for home lighting, restaurant lighting, office lighting, photography lighting, and other suitable places.

They are practical and convenient for your life that is an ideal household tool. Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube; g24q-2 base:18w quad Tube; GX24q-2 Base:18w Triple Tube; G24q-3 Base:26w 32w Quad Tube; GX24q-3 Base:26w 32w Triple Tube. Doing so may cause the bulb to flicker or even smoke! Check the size first: 4 x led light socket adapter. Do not use ballasts to operate LED bulbs in lamps. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund.

We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale! If you are not sure, please consult an electrician. Premium material: lamp base converter made of flame retardant PBT material and copper nickel-plated pins, more durable and practical, Small size and lightweight. Hassle-free guarantee: phituoda's products can only be packed and shipped after strict quality inspection.
BrandPHITUODA #ad
ManufacturerPHITUODA #ad
Part NumberTR20210515 - 003

5. AC

#ad

LED Light Sockets Adapter, G24 to E26 E27 Lamp Base Converter, Bulb Base Adapter, Lamp Holder Converters with Short Shaft Pack of 10, 4-Pin Light Bulb Socket

#ad
AC #ad - The ballast in your fixture must be removed or bypassed for these adapterS TO FUNCTION PROPERLY. Ideal for home use. It fits any standard medium bulb to the G24 and enables almost all commonly found bulbs to work with the output. Suitable for multiple voltagesNote: it can not transfer the voltage, just the socket converter.

Material: flame resistant pbt. There are some led driver who can be compatible with the ballast, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast. Works with led / halogen / CFL light bulb lamps. G24 base to e26/e27 light sockets adapter converter can be used to transforms G24 fixture to fit standard the E26 / E27 medium size bulb in any.

So the best thing is bypass or remove once we want to change CFL to LED Lamp. This adapter with SHORT shaft. Please check your bulb size, and refer on our adapter detailed size on the left picture before you purchase. When we remove pin-based cfl, we only removed the lamp, there will be 2 ballasts, the light will not work. Please bypass or remove the ballast when you use, otherwise the bulb doesn't light on. Easy to install, plug and play.
BrandAC #ad
ManufacturerAC #ad

6. E-Simpo

#ad

Double Tab,2P in Parallel, Gx23 to E26 Adapter Gx23 to E26/E27, 2pcs E-Simpo GX23 Pin-Base to E26/E27 Lamp Base Adapter CFL PL Lamp base to E26 E27 Edison Socket Holder Adapter

#ad
E-Simpo #ad - Works for 2-pin cfl with gx23 base: 13w single Tube; and GX23-2 Base:13w Quad Tube. Flame retardant pbt, physically change the contact, Phosphor Bronze. Suit for gx23 socket, don't change voltage. Gx23 has 2tab in the central square plastic part. 2pcs/pack as sample test. Gx23 series female socket fixture to e26 Male Bulb Base Adapter. This is for gx23 only, not for g23, G24d, GX24d which are also 2P. Size: gx23 type 2 pin cfl to medium e26. 2-pin cfl with gx23 base: 13w single Tube; GX23-2 Base: 13w Quad Tube.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight68 Grams

7. Luxvista

#ad

Luxvista Gx24q to E26 Lamp Base Converter, Gx24q to E26 Adapter, Remove Bypass the Ballast, G24Q to E26/E27 4 Pin CFL Lamp Base Converter, 10-Pack

#ad
Luxvista #ad - Compatible base - suit for all cfl 4 pin gx24 base, g24q-3, compatible with 4 Pin G24Q-1, gx24q-1, gx24q-2, g24q-2, GX24Q-3 Please confirm what base you need before you buy.

Easy installation - twist into existing GX24Q socket and it immediately transforms your fixture to fit any standard E26/E27 medium screw base bulb. If you have not remove or bypass ballast, it will damage the bulb or cause filckering. High temperature resistant - Anti-burning PBT material and anti-aging enable more safty in your life. No ballast - ballast need to be removed or bypassed. Features - gx24q to medium edison e26/e27 adapter converter, 4 pin gx24 base, dimension: H 5. 6cm * w 8cm 2. 28 * 3. 14 inches.
BrandLuxvista #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.28 Inches
Width2.28 Inches
Part Number818

8. E-Simpo

#ad

Need Rewire to Bypass Ballast. 2-Pack, 2pcs E-Simpo 4Pin Gx24q to E26/E27 Light Socket Adapter Lamp Base Converter. NOT PLUG AND PLAY

#ad
E-Simpo #ad - Consult an electrician if you are unsure. Need ballast removal. But mostly gx24q cfls are with an electronic ballast inside, burnt, hot or smell, and damage the electrical parts inside the bulb. Physically change the socket contact, which will cause the led bulb flickering, twist into existing GX24Q socket and transform the fixture to fit any standard E26 E27 medium size bulb.

There are some led driver who can be compatible with the ballast, there will be 2 ballasts, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast. When we remove pin-based CFL, the light will not work. 2pcs/lot, sample pack. With base depth is 15.

5mm/06 inches. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Not for diy!!! need rewiring! removing or bypassing the ballast inside the light fixture is required. Pbt housing, works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube. Do not operate the led bulb with ballast in the fiXTURE.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight66 Grams

9. E-Simpo

#ad

15-Pack 4P Gx24q to E26 Lamp Base Converter,15.5mm G24Q to E26/e27, Rohs,Need Bypass Ballast., Gx24q to E26 Adapter,Lamp Holder Converter

#ad
E-Simpo #ad - So the best thing is bypass or remove once we want to change CFL to LED Lamp. Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. Consult an electrician if you are unsure. Ballast is a must to start a high voltage600V-1500V 1ms to light up the CFL, and easily destroy the led lamp.

There are some led driver who can be compatible with the ballast, we only removed the lamp, no led driver can be compatible with all the ballast. This is 4p, not for 2p;need bypass or remove the ballast, otherwise, it doesn't light on. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. The ballast in your fixture must be removed or bypassed for these adapters to function properly. So the led driver input should be 100v-240v or 85-265V, but all screw-in E26 E27 are lamp-ballast integrated.

When we remove pin-based cfl, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, the light will not work. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. All pin-based cfl, like gx24q g24d gx24d gx23 g23 are lamp-ballast separated, so 600-1500v will be too high, but it is dangerous for led lamp.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height1.5 Inches
Length1.5 Inches
Weight0.88 Pounds
Width2.31 Inches
Part NumberG24-E26
ModelGX24Q to E26 Light Socket Adapter
Warranty1 year for the lamp holder, but don't blame the converter if
1. You don't bypass the ballast when your e26 lamp is not compatible with the ballast;
2. The socket is not gx24q or g24q, whose 4 holes has contact and 2 holes at one side are mutually connected or all 4 holes has wires out, one side, 2 holes' wires go to l, the other side goes to n.

10. E-Simpo

#ad

2P G23 CFL PL Lamp base to LED E26 Light Socket Adapter,G23 to E26 Adapter G23 to E26/E27, 2pcs E-Simpo Pin-Base G23 to E26/E27 Lamp Base Adapter, Single Tab,2P in Parallel

#ad
E-Simpo #ad - Now you can buy normal bulbs easily. G23-e26 adapter simplifies life enormously. G23 has only single Tab in the central square plastic part. G23 series female socket Fixture to E26 Male Bulb Base Adapter. Need bypass or remove the ballast, otherwise, it doesn't light on. Size: g23 type 2 pin cFL to Medium E26. Flame retardant pbt, physically change the contact, Phosphor Bronze. Suit for g23 socket, don't change voltage. 2pcs/pack as sample test. This is for g23 only, not for gx23, G24d, GX24d which are also 2P.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight68 Grams