Top 10 EZARC Carbide Hole Cutter Heavy Duty for Stainless Steel – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. EZARC

#ad

EZARC Carbide Hole Cutter Heavy Duty for Stainless Steel, 2'' 51mm

#ad
EZARC #ad - All in one design: drill bit, wrench are included, spring, no need to buy any extra accessories for the drilling works. Extreme durability and no teeth breakage for any tough job. Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood. Smooth cuts with perfect cutting result. Replaceable high quality pilot drill bit are available.
BrandEZARC #ad
ManufacturerEZARC #ad
Height2.95 Inches
Length2.17 Inches
Weight0.53 Pounds
Width4.53 Inches
Part Number804034

2. EZARC

#ad

EZARC Carbide Hole Cutter for Thick Metal, Metal Pipes and Hard Material, CHS-25M 3/4" 19mm, Deep Cut Hole Saw for Stainless Steel

#ad
EZARC #ad - If you have any questions, please feel free to contact us to get immediately reply. Safe & durable design ezarc metal plate hole saw cutter uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable and heat resistant.

Various application cutting depth of 1-inch makes this stainless steel hole cutter easy to pass through a variety of home decoration and industrial applications, iron pipes, including thick metal, high alloy steel, stainless steel, and sheet metal plate. This hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate. Satisfactory service always committed to do our best to make sure our customers are satisfied about the purchasing of carbide hole saw from us.

Effortless operate our carbide hard metal cutting hole cutter has a chip groove and deploying hole design, which can effectively remove chips and increase operating speed. Replaceable pilot drill bit are available. Fast & precise cuts the increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide superior service life and fast cutting in the most demanding operations.
BrandEZARC #ad
ManufacturerEZARC #ad
Height5.51 Inches
Length2.17 Inches
Width1.38 Inches
Part Number804812

3. Klein Tools

#ad

Klein Tools 7/8-Inch Carbide Hole Cutter

#ad
Klein Tools #ad - Uses replacement pilot bit 31874. Cuts quick, precise holes in stainless steel, iron, mild steel, copper, and brass sheet up to 3/16-Inch 0.5 cm thick. Conduit and pipe sizes: 1/2-Inch 1. 3 cm. Split point pilot drill bit prevents bit walking. Integrated flange prevents the operator from drilling beyond the sheet metal. Heavy duty, durable carbide hole cutters for long life.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height4 Inches
Length6 Inches
Weight0.3 Pounds
Width4 Inches
Part Number31852
Model31852
Warranty1 Year Manufacturer

4. fryic

#ad

5/8”, 1-9/16”, 2” Heavy Duty for Stainless Steel, Fryic 10 Pcs TCT Tungsten Carbide Hole Saws Cutter Kits 9/16”, 1-3/8”, 1”, 1-3/16”, 3/4”, 7/8”, 1-13/16”

#ad
fryic #ad - Tct tungsten carbide Tipped to keep Long performance life and teeth remain sharp longer. The tct hole saw including sizes with 14mm9/16”, 19mm3/4”, 45mm1-13/16”, 40mm1-9/16”, 22mm7/8”, 16mm5/8”, 30mm1-3/16”, 35mm1-3/8”, 25mm1”, 50mm2”. Use in drilling thick stainless steel, general steel, angle steel, aluminum, cast iron, copper, channel steel etc. Three blade design to keep high efficiency cutting hole and High precision hole drilling. With max 28 mm cutting depth. Better chip clearance: Spring can protect the core drill and teeth to auto popup the cutting waste.
Brandfryic #ad
ManufacturerFryic #ad
Height4.33 Inches
Length9.84 Inches
Weight3.3 Pounds
Width5.51 Inches
Part NumberFR.2.1450

5. COMOK

#ad

COMOK 3/4 Inch 19mm Carbide Hole Cutter Heavy Duty for Stainless Steel Long Life Hole Saw Kit for Hard Metal 2PCS

#ad
COMOK #ad - Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood. Carbide grit cutting edge for sharp cutting and long lasting. We suggest customers to use cutting fluid to keep the hole saw cold during usage. This hole saw is especially designed to cut alloy materials. Extreme durability and no teeth breakage for any tough job.
BrandCOMOK #ad
ManufacturerCOMOK #ad

6. EZARC

#ad

Long Life Hole Saw Kit for Hard Metal, EZARC Carbide Hole Cutter Set 6 Piece for Stainless Steel

#ad
EZARC #ad - Extremely long lifetime and no teeth breakage for any tough job with high-end tungsten carbide technology. Provide fast and precise cuts into stainless steel, cast iron, mild steel, sheet metal, aluminum and FRP smaller than 5mm. Industrial grade metal drilling hole cutter, more than 10 times longer life than Bi-Metal hole saw on hardened metal drilling. Smooth cut with perfect cutting quality for every hole. This hole saw set includes 3 pieces hole cutters with dimensions of 7/8 inch, 1-1/8 inch, 1-3/8 inch, 2 pieces HSS pilot drill bits and 1 piece hex key.
BrandEZARC #ad
ManufacturerEZARC #ad
Height11.02 Inches
Length3.94 Inches
Width2.13 Inches
Part Number804201

7. REETAI-FOUR

#ad

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.5/8"-2-1/8”

#ad
REETAI-FOUR #ad - Application: these hole saw sets provide fast and precise cuts into 28MM thickness metal material, metal, they are Industrial grade metal drilling hole cutter for stainless steel, aluminum, iron. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.

Easy to use: tct carbide steel teeth for fast cutting of clean and smooth round holes. Remember to add coolant during continuous high-speed drilling. High quality material:this hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy. The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications. Meric tct hole saw set includes :10 pcs hole cutters with dimensions 16mm5/8", 30mm1-1/8", 53mm2-1/8", 18mm11/16", 35mm1-3/8", 45mm1-3/4", 22mm7/8", 20mm3/4", 25mm1", 50mm2", 10 pcs pilot drill bits and 1 pc hex key.

A variety of sizes to meet your different needs. It is also suitable for plastic, FRP, etc. Sincere service: drill bit, please feel free to contact us by email or Q&A, wrench are included, spring, which make your job more convenient and easier. The pilot drill bit is detachable. If you have any question about product, the reply will be provided within 24 hours.
BrandREETAI-FOUR #ad
ManufacturerREETAI-FOUR #ad
Part Number006

8. Klein Tools

#ad

Includes Carbide Hole Cutters and Pilot Bit in Rust-Proof Molded Plastic Case, 4-Piece, Klein Tools 31872 Heavy Duty Hole Cutter Kit

#ad
Klein Tools #ad - Heavy duty, durable carbide hole cutters for long life. Integrated flange prevents the operator from drilling beyond the sheet metal. Set contains: 7/8-inch, 1-1/8-inch, 1-3/8-Inch plus one extra pilot bit. All components are packed in a rust-proof, molded plastic carrying case. Hole cutters cut quick precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch 0.5 cm thick. Conduit and pipe sizes: 1/2-Inch 1. 3 cm to 1-Inch 2. 5 cm. Split point pilot drill bit prevents bit walking.
BrandKlein Tools #ad
ManufacturerKlein - Geneva Supply #ad
Height4 Inches
Length6 Inches
Weight1.4 Pounds
Width4 Inches
Part Number31872
Model31872

9. EZARC

#ad

EZARC Oscillating Multitool Blade Carbide Saw Blades for Hard Material / Metal / Nails / Bolts / Screws, 3-Pack

#ad
EZARC #ad - Hardened nails, metal cube, stainless steel and fiber glass. Super endurance for hardened materials, e. G. Multi-fit interface fits on most popular oscillating multi tools, two extra adapters in the package cover more tools than any other competitors on the market. Carbide teeth for high performance in metal and other materials. A 'must have' blade for tough cutting jobs on hard material. Up to 30x longer lifetime with carbide teeth design.
BrandEZARC #ad
ManufacturerEZARC #ad
Height0.04 Inches
Length3.46 Inches
Weight0.24 Pounds
Width1.34 Inches
Part Number801103

10. Rannb

#ad

Steel, Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron

#ad
Rannb #ad - Materialour hole saw adopts premium Tungsten Carbide TippedTCT with high hardness and good wear resistance. Dimensioncutting dia: 38mm/ 1. 5";shank dia: 10mm/04" ;hole saw depth : 25mm/ 1". Ideal designsplit tip pilot drill prevents damage by gradually guiding cutter to material. Applicable materialyou can easily to drill on the stainless steel plate, castings, iron, steel, aluminum alloy and other metal plate drilling. Package content1 x hole saw + 1 x L Wrench + 2 x Pilot Drill Bit.
BrandRannb #ad
ManufacturerRannb #ad