Top 10 Drill Guide Attachment for Hand Drills – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. Milescraft


Multi-Angle Drill Guide Attachment, Multi-Angle Readouts, Compatible with most 3/8 in. Drill Accessories, Self-Centering Drill Guide Base, Milescraft 1318 DrillMate Portable Drill Guide

Milescraft #ad - Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Adjustable depth stop and spring action control of the head. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2 Inches
Length16.63 Inches
Weight4 Pounds
Width7.13 Inches
Part Number1318

2. Wolfcraft


Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

Wolfcraft #ad - Drill adapter itself Slides Up And Down On Guide-Bars. Guide-bars themselves have Springs For A Quick Return When Doing Repetitive Drilling. Drill guide that can be used In Horizontal, Vertical Or Angle Positions. Angle positions can go up to 45 degrees, And Rubber Pads In The Base Hold The Guide In Place.
BrandWolfcraft #ad
ManufacturerWolfcraft #ad
Height11.75 Inches
Length5.25 Inches
Weight3 Pounds
Width5.5 Inches
Part Number4525404
WarrantyLimited Lifetime

3. CertBuy


Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Portable Drill Guide with Chuck, CertBuy Portable Drill Press for Hand Drill

CertBuy #ad - Diy project tool: we know that the success of many diy projects depends on drilling straight and accurate holes, Complete control, self-centering and precise depth setting for repetitive drilling.

Hold round materials securely, round pipe, DIY, smooth wall drilling, no slipping. Widely use: the drill bit guide can be used for wood, etc. Convenience: no need to fix, just use when docking, suitable for electric drills with a chuck range greater than 8mm. So buy one angle hand drill stand for your work. Accuracy: this tool provides accurate drilling results, adjustable from 45-90 degree, you can add a whole new level of accuracy with this angle drill guide jig when drilling holes with your standard hand drill. Adjustable: our drill jig for straight holes are adjustable to meet your needs, adjustable angle from 45 degrees to 90 degrees.
BrandCertBuy #ad
ManufacturerCertBuy #ad
Part NumberWWUS-Drillguide

4. Milescraft


Milescraft 1312 DrillBlock- Handheld Drill Guide

Milescraft #ad - Centerlines ensure accurate alignment when drilling into various surfaces. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces. Package dimensions:3. 05"l x 5. 33"w x 14. 48"h.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height1.25 Inches
Length8 Inches
Weight0.8 Pounds
Width2.75 Inches
Part Number13120103

5. General Tools


Silver, Portable & Lightweight, Folds Flat for Storage, General Tools 36/37 Precision Drill Guide For 3/8-Inch or 1/2-Inch Power Drills

General Tools #ad - A slide lock facilitates sanding and buffing. Works with dowels- v-groove for positioning round stock, pipe or tubing. Built in protractor- drills accurate right-angled or variable-angled holes with the built-in protractor scale. Stable- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing. Adjustable- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position. Positive stop- built-in depth stop for accurate drill depth.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height2 Inches
Length13 Inches
Weight0.01 Pounds
Width6 Inches
Part Number36/37



BEAMNOVA Drill Press Stand for Hand Drill Benchtop Industrial Kit Tool Holder 90 Degree Clamp Workbench Repair Tool

BEAMNOVA #ad - 3 size collars - the drill collar can be adjusted to suit a variety of tools, and the stand is supplied with 3 different size collar inserts to suit smaller drills. Widely fits - beamnova heavy-duty drill stand is designed for power drills of collar diameter from 38mm to 43mm(1.

5'' to 1. 69'' with supplied reducing bush. Does not fit most cordless drill, which does not have a collar for clamping. With this drill stand, drilling at surfaces, round workpieces, and boards can be done with absolute precision. Note: suitable for most corded drills that have a collar for holding. Money-saving - substantially costs less than purchasing a full drill press. It also features a depth adjustment scale and an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter.

User-friendly - it has a sturdy column bar and the base has slots for fitting a machine vice and 4 clamping points for mounting firmly with your worktable. Adjustable - includes separate adjustments for limiting press depth and drill height, so you can change drill position with minimal risk of over-drilling into the stand. This drill press stand has all the necessary features expected in a full-size drill press stand.
ManufacturerBEAMNOVA #ad
Height4.33 Inches
Length16.54 Inches
Width7.87 Inches
Part NumberBI0B04M375-0FBA

7. Kings County Tools


Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

Kings County Tools #ad - Precise use – a reliable depth stop is included to ensure each task goes as expected. Just use your drill – a hand-held drill now gets the control of a drill press with this steel and plastic jig. Standard size - 3/8" shaft and chuck are used for this quick tool conversion while it works smooth with no wobble. Boring, in a good way - angle boring up to 45-degrees is easily controlled and moved in 5-degree increments. Add to tool chest – this drill guide makes a great addition to any tool chest and is portable for when necessary.
BrandKings County Tools #ad
ManufacturerKings County Tools #ad
Height3 Inches
Length7 Inches
Width18 Inches
Part Number91G01.05



Impact Ready DWARA120, DEWALT Right Angle Attachment

DEWALT #ad - The right angle drill adaptor features Best-in-Class Performance and Accessibility, with 1. 5-inch front-to-back design. The right angle drill attachment has magnetism for fastener retention. Dewalt right angle attachment is engineered for use in Impact Drivers, allowing users to drill or drive.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height8.75 Inches
Length3.9 Inches
Weight0.3 Pounds
Width1.88 Inches
Part NumberDWARA120

9. Ejoyous


Multi-Angle Drill Guide Attachment Mobile Drill Stand Portable 45 Degree Adjustable Angle Drill Press Machine Stand Guide Rail Base

Ejoyous #ad - Mobile drill stand is made of high quality steel and aluminum, long service life; Small size and portable design, high strength, strong and durable, easy to store and carry.

A drill guide that can be used in horizontal, perfect for straight or angled drilling, vertical or angular position, drilling on the edge of a board or on round stock. Adjustable angle drill machine stand is composed of rotatable double guide rods, which can be adjusted to accurately drill holes at an angle of up to 45°. Multi-angle drill guide rod itself has a spring, which can be quickly reset when repeated drilling. With 4 screw holes, it is convenient to use as a fixed drill floor with depth limiter, easy to use.
BrandEjoyous #ad
ManufacturerEjoyous #ad
Height0.39 Inches
Length0.39 Inches
Width0.39 Inches
Part NumberEjoyous231gqednpr135



3/8" And 1/2" Power Drills, CIPCO PRO TOOL Multi-Angle Drill Guide Power Drill Stand with Chuck for 1/4”

CIPCO PRO TOOL #ad - Non-slip feet : prevent slipping and marring on the work surface, that can be removed to mount with screws when needed. Holds round materials securely : V-groove, Metal base and three v-grooves for drilling on round stock.

Please refer to the installation instructions and usage instructions in the video. Adjustable angle settings : angle readout for setting drilling angles to 45°, 75°, 60°, and 90°. All metal head : attaches to all 1/4”, 3/8" and 1/2" Power drills and it also includes a 3/8" Capacity chuck with key. Whether it’s on the wall, on the ceiling, at a slant, or in round materials, exact drilling is easy. Depth stop & large handle : adjustable depth stop and spring action control of the head.
ManufacturerCIPCO PRO TOOL #ad
Height2.56 Inches
Length11.81 Inches
Weight3.12 Pounds
Width5.9 Inches