Top 10 Dremel Bits for Metal – Cutting Burrs

As an Amazon Associate I earn from qualifying purchases.

1. Lukcase


10 Pcs 1/8" Shank, 1/4" Head Length Tungsten Steel for Woodworking,Drilling, Polishing by Lukcase, Engraving, Double Cut Carbide Rotary Burr Set

Lukcase #ad - Carbide die grinder bits: these carbide rotary burr set, cutting diameter 1/4'', with 1/8'' shank is made from Tungsten Carbide. Total length:45-50mm, shank Length 35mm, Shank Diameter 1/8''.

An ideal choice for your DIY woodworking, engraving, carving, and polishing. Adaptability: 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel. Double cut design: the groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum. Long working life: packed with plastic storage case for safety storage and protection.
BrandLukcase #ad
ManufacturerLukcase #ad
Part NumberSP001

2. K Kwokker


Wood Carving, K Kwokker Tungsten Carbide Burrs 1/8 inch Diamond Files Carving Bit HRA85 for Dremel Rotary Drill Air Die Grinder 1/4inch Head Machining Hardness fits Rotary Drill DIY, Metal Polishing

K Kwokker #ad - Easy to cutting, durability. 1/8'' shake 1/4" cutting dia carbide rotary burr set k kwokker 10pcs rotary burrs. Warmth tips the speed of the rotary tools usually is 6000-50000 revolutions per minute, long service life, reduce the inefficiency turnover.

Safe and efficient, glass fiber, aluminum, plastic, metal, stone, Like a Hot Knife Thru Butter Suitable for the processing of woodworking, porcelain and other material.110 different types of drill bits, Cutting dia: 6mm1/4", meet your different needs. Very well made and tough as nails, nice tungsten Carbide Made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection.

This is a essential tungsten carbide burrs kit for woodworkers & enthusiasts. Note: when using the woodworking accessories, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are recommended to prevent stab wounds. Shank dia: 3mm1/8'', fits Dremel tools and most small rotary tools.
BrandK Kwokker #ad
ManufacturerK Kwokker #ad
Length4 Centimeters

3. Dremel


Dremel 689-01, Perfect for use Wood, Metal, and Glass 11 Piece, Carving and Engraving Rotary Tool Accessory Kit

Dremel #ad - Turn your dremel rotary tool into a wood carver, metal engraver, 106 1/16" engraving bit, 108 1/32" engraving bit, 7103 5/64" Diamond Wheel Point, 107 3/32" Engraving Bit, and glass etcher! Engraving and carving accessories include 105 1/32" engraving bit, 7134 5/64" Diamond Carving Bit.

Usa-based customer service – available by chat, email, phone or visit us at our service center in Racine, WI. Grinding and sharpening accessories include 83142 9/32" grinding stone, 83702 1/8" Grinding Stone, 83322 1/8" Grinding Stone, 84922 3/16" Grinding Stone. This kit includes a reusable storage box and 11 accessories. Carving & engraving accessory set comes in a reusable accessory storage box with 11 rotary accessories ideal for etching, grinding, engraving, and sharpening.
BrandDremel #ad
ManufacturerDremel #ad
Height0 Inches
Length0 Inches
Weight0.3 Pounds
Width0 Inches
Part Number689-01

4. Dremel


Dremel 9904 Tungsten Carbide Cutter

Dremel #ad - 1/8" shank. Use the sides of the cutter rather than the tip for effective cutting the tip cuts poorly and can break under pressure. Use on hardened steel, fired ceramics and other hard materials.

For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit. Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics. Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking. 1/8" maximum cutting head. Secure objects to a stable surface while working.
BrandDremel #ad
ManufacturerDremel #ad
Height0.2 Inches
Length1.6 Inches
Weight0.02 Pounds
Width0.8 Inches
Part Number9904
Warranty1 Year Parts and Labor

5. Carving Expert


Carving Expert 9pcs Abrasive Mounted Stone For Dremel Rotary Tools Grinding Stone Wheel Head Dremel Accessories 1/8 Inch Shank

Carving Expert #ad - Package included: 9 * polishing tool. Material : Stone, Metal;. Column-shape * 3, bullet-shape * 3, T-shape * 3. Suit for polishing and grinding of metallic or non-metallic products. Shank diameter: 3. 0 mm. Fits most normal rotary tools for sanding, sharpening, polishing, grinding, deburring.
BrandCarving Expert #ad
ManufacturerCarving Expert #ad
Height5 Inches
Length5 Inches
Weight250 Grams
Width5 Inches
Part Number1



Carbide Burrs Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs

JESTUOUS #ad - Used with handheld electric or pneumatic tool drive, for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs. Assorted shapes include: ball, rounded cylinder, cone, flat top cylinder. For cast iron, alloy steel, stainless steel, plastics, carbon steel, cast steel, metal and other materials. With tungsten carbide material, sharp and sturdy, processing all kinds of metal and non-metal. Carbide burr kits shank diameter:3mm1/8 inch, Cutting edge diameter:3mm1/8 inch, and 20pcs/set.
ManufacturerTungsten technology inc #ad
Height0.6 Inches
Length4 Inches
Weight0.01 Pounds
Width2.6 Inches
Part NumberXZC-20PC-1/4-ZF
ModelDIY Crafts ® 5903

7. Dremel


Lock Starter Kit, 1 1/2-Inch 38.1 mm Wheel Diameter, 5 piece Fiberglass Reinforced Cut-off Wheels and EZ402 mandrel included, Dremel EZ406-02, Rotary Tool Cutting Disc Accessories, EZ

Dremel #ad - Usa-based customer service – available by chat, phone or visit us at our service center in Racine, email, WI. Cut-off wheels are reinforced with fiberglass for increased durability to cut, trim and groove into a variety of metals including hardened steel.

Working diameter: 1-1/2" 38. 1 mm, blade thickness:. 045” 1. 1mm, blade Material: Fiberglas. For use with dremel ez402 mandrel only. The ez456 cut-off wheels last 2X longer than current fiberglass-reinforced cut-off discs. Ideal for easily cutting or slotting bolts, thin wood, screws or sheet metal, ceramic and plastic.

Dremel ez406-02 includes one ez402 ez - lock mandrel and five EZ456 Fiberglass reinforced cut-off wheels. Dremel accessories are also color-coded into usage categories, to find more Cutting accessories look the Red color code. The dremel the ez-lock is the first patented system of its kind, eliminating the need for a screw and a screwdriver.
BrandDremel #ad
ManufacturerDremel #ad
Height2 Inches
Length1.5 Inches
Weight0 Pounds
Width0.1 Inches
Part NumberEZ406-02
WarrantyAs Labeled

8. Coocicyi


545 Diamond Cutting Wheel 22mm 25pcs with 402 Mandrel 3mm 5pcs and Screwdriver for Dremel Rotary Tool

Coocicyi #ad - Application: designed for dremel rotary tools and replacement EZ545/544 lock Dremel cut off wheel. Multi-purpose: this diamond grit cutting wheel are suitable for doing DIY, sawing, marble concrete, cutting, carving, brick, porcelain, jade, ceramics, sharpening and filing hard materials including all kinds of precious stones, epoxy and other hard woods.

It may become very hot when cutting, add some water to keep it cool. Size: the cutting discs diameter: 22mm; Thickness: 06mm; mandrel Diameter: 3. 0mm; screwdriver: 98mm. It is completely coated with fine diamond particles, breathing holes is for reducing heat and removing debris, perfect for making slots and slits.

High quality and durable: the aluminum oxide cut off discs are thin and sharp. Attention: for your safety, please must wear gloves and goggles and be care around spark when using mandrel dremel diamond cutting tools. But not recommended for metal.
BrandCoocicyi #ad
ManufacturerCoocicyi #ad
Height0.39 Inches
Length7.09 Inches
Width3.94 Inches



Engraving, Drilling, DIY Wood-working Carving, HOMEIDOL 10pcs 1/8 inches Shank Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Rotary Tool for Grinder Drill, Soft Metal Polishing

HOMEIDOL #ad - Double design: double groove because the lines are crossed, more suitable for the object density is relatively low. Suitable for most tools: 10 pieces double cut solid carbide Rotary Burr Set carbide burr set, fits most small rotary tools, Woodworking Drilling Carving Engraving, making DIY carving fans much easier to do the wood working job.

Long working life: lasts long working life, high-quality finish, long service life, packed with nice plastic case for safety storage and protection. High productivity: processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.

Material: tungsten carbide, cutting edge diameter: 6 mm1/4 inch, shank diameter: 3 mm1/8 inch, Total length: 45-50 mm1.77-2 inch. Please check the size before you buy it. Aluminum material on! With cross-grain chip quickly, in the grinding and carving time. For example: Carbide burr straight used in the wooden. High efficiency, good economic returns. Plastic.
ManufacturerHOMEIDOL #ad
Part NumberCJ01-WJ20-RY

10. Dremel


Dremel 9903 Tungsten Carbide Cutter

Dremel #ad - The product is tungsten carbide Cutter, 1/8" Diameter With 1/8" Shank. For use on both hardened steel and stainless steel. Rotary tool accessory for shaping, smoothing and material removal. May also be used on plastics, hardwoods and other hard materials. For use on cast iron, nonferrous metals and fired ceramics.
BrandDremel #ad
ManufacturerDremel #ad
Height0.6 Inches
Length4 Inches
Weight0.02 Pounds
Width2 Inches
Part Number9903
Warranty1 Year