Top 10 Breakout Board MACH3 – Motion Detectors

As an Amazon Associate I earn from qualifying purchases.

1. SainSmart

#ad

SainSmart 4 Axis Mach3 USB CNC Motion Controller Card Interface Breakout Board MC3D3 V2.1

#ad
SainSmart #ad - General-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other devices.

Support for connecting electronic handwheel. General-purpose opto-couplers isolation input: can connect the limit switch, home switch, auto tool zero, emergency stop switch, etc. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor. Have 0-10v signal output, you can use mach3 software to control the spindle motor speed.
BrandSainSmart #ad
ManufacturerSainSmart #ad
Part Number019211
Model4331030127

2. KOOBOOK

#ad

KOOBOOK 1Pcs 5 Axis CNC Breakout Board Mach3 Interface Board with Optical Coupler for MACH3 Stepper Motor Driver(With USB Cable)

#ad
KOOBOOK #ad - Fully support mach3 and other computer software that supports parallel port control. The board prints all port names at a glance. To ensure computer security. Can be connected to the common or common yang, the input level is 5V driver. Usb power supply and peripheral power supply are separated to ensure computer security. All input signals are isolated by optical diaphragm, tool setting, limit, which can be connected to emergency stop, etc. The peripheral wide voltage input, 12-24V, and anti-reverse function.
BrandKOOBOOK #ad
ManufacturerKOOBOOK #ad
Part NumberKB033

3. RATTM MOTOR

#ad

5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

#ad
RATTM MOTOR #ad - The computer lpt port supplies the power individually, the computer and machine tool isolate effectively. It makes the data more secure, separating from the power supply of other parts. A special high speed chip is used to process the input and output I/O signals.

Meanwhile, if your laptop does not have its own parallel port, which is allowed to controlling output, you need purchase a PCI LPT converte Card.2. 4. Therefore, with further insurance of security and stability. Among the optical coupling isolation, communicating with the host computer, B. Some of the output port is reusable functinality. 1. There are 12 output signal, one port only can be used as one function. 5. This board only support LPT port, supporting as many as 6 axis linkage.

It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals. Name:mach3 control board, this card only support LPT WIN-XP computer, not support win7/8/10 system. 3. There are 5 input signals, the p11and p12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, which are isolated by the optical coupling.
BrandRATTM MOTOR #ad
ManufacturerChangzhou Rattm Motor Co.,Ltd #ad
Part Number4V

4. Garosa

#ad

MACH3 USB Interface CNC Motion Control Card Breakout Board Controller with Strong Anti-Interference Ability

#ad
Garosa #ad - Security: all the input signal isolation by the light lotus, etc. Can be accessed by emergency stop, limit, back to zero, the knife, to ensure computer security.

Support: it is able to support various versions of MACH3 software, support for the latest version. Compatibility: compatible for windows xp, for WIN7, support for 64-bit systems, for WIN10, for WIN8, support for laptops, support for tablets. Anti-interference:the frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, strong anti-interference ability. Output: the interface board can output 0~10V analog signals, and can also be configured as 0~5V output.
BrandGarosa #ad
ManufacturerGarosa #ad
Height1.97 Inches
Length2.76 Inches
Weight0.02 Pounds
Width1.97 Inches
Part NumberGarosaxrzekv9m0q

5. UCONTRO

#ad

Spindle speed analog, PWM output control, Stepper Motor, UCONTRO CNC 3 Axis 200KHz Ethernet MACH3 Breakout Board Motion Control Card, Can connect Servo Motor, MPG interface

#ad
UCONTRO #ad - 2 ways programmable input ports. 1 way standard mpg interface, pWM output control, 1 port 0-10V spindle speed analog output interface. Dc electrical isolation, Optocoupler isolation. 10 ways programmable output ports. Up to 200khz stepper motor control pulse output.
BrandUCONTRO #ad
ManufacturerUCONTRO #ad
Part NumberNVEM
ModelNVEM

6. Thincol

#ad

15-32VDC, CNC Breakout Board, CNC Plasma Cutting Machine, CNC Lathe, MACH3 4-Axis 6-Axis CNC Controller Motion Control Breakout Board Adapter, for CNC Engraving Machine

#ad
Thincol #ad - It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals. Some of the output port is reusable functionality. The.

Among the optical coupling isolation, communicating with the host computer, which can be used for connecting main shaft encoder, the P11 and P12 are high-speed, or the same demanding. There are 5 input signals, which are isolated by the optical coupling. A special high speed chip is used to process the input and output I/O signals. The cir. There are 3 replays, which can support mach3 control software programming.

The computer LPT po. The relay's on or off can be controlled through the control of MACH3 software. On the interface board, there is a D/A circuit, with PWM to a 0-10V. The output port is parallel port P1, which can output the PWM signal within 2. 5khz. Meanwhile, one port only can be used as one function. Each relay has attracted indicating lamp, P3 and P4, P2, which is more intuitive and convenient.
BrandThincol #ad
ManufacturerThincol #ad
Height0 Inches
Length0 Inches
Weight0.33 Pounds
Width0 Inches
Part NumberThincolrnodgbtmkq

7. UCONTRO

#ad

Support Resume from Breakpoint and Spindle Speed Feedback, 10 3 Axis, Work with Windows 7, UCONTRO Mach3 USB 3 Axis CNC Motion Control Card Breakout Board 2000 KHz 2 MHz

#ad
UCONTRO #ad - Support all versions of Mach3. Support spindle speed feedback. Full support USB hot-swappable. Could resume from Breakpoint. Supports 4-axis linkage, can connect servo driver/stepper driver.
BrandUCONTRO #ad
ManufacturerUCONTRO #ad
Part NumberMK3
ModelMK3

8. Alinory

#ad

Alinory Optical Coupling Stepper Motor Breakout Board Anti-Reverse PWM Output 12-24v Wide Voltage Mach3 Breakout Board 17 Ports Electricity Conversion Circuit

#ad
Alinory #ad - The output port is P17 port. One-way relay output port can control the spindle switch. 12-24v wide peripheral voltage input, with anti-reverse connection function. Fully support for mACH3 and other computer software that supports parallel port control. Usb power supply and peripheral power supply are separated to ensure computer security. All input signals are isolated by optical coupling, limit, tool setting, and can be connected to emergency stop, etc.
BrandAlinory #ad
ManufacturerAlinory #ad
Height2.36 Inches
Length9.06 Inches
Weight0.74 Pounds
Width4.72 Inches
Part NumberAlinoryrbk6ygv19e

9. Sign Smart (SainSmart)

#ad

SainSmart 5 Axis Breakout Board for Stepper Motor Driver CNC Mill

#ad
Sign Smart (SainSmart) #ad - The two-stage signal processing, signal transmission smooth, powerful anti-jamming. Five-axis job leD display, visual display products, working condition. The maximum matching 5-axis stepper motor driver. Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc. 5 input interface to define the emergency stop, limit, points in the knife, etc.
BrandSign Smart (SainSmart) #ad
ManufacturerSign Smart (SainSmart) #ad
Part NumberCECOMINOD047429
ModelCECOMINOD047429

10. UCONTRO

#ad

UCONTRO SUMACH CNC 4 Axis USB Motion Control Card Breakout Board 150 KHz MACH3 5V DC Analog PWM support MPG for DIY 3020 3040 6040 Machine

#ad
UCONTRO #ad - This motion control card could be a perfect replacement for motion control cards on YOOCNC CNC Machine and other brand engraving machines. Can support 4 axis stepper systems, 150 KHz pulse output for every axis;. Could transfer data to Computer through USB port;. 7 ports photoelectric isolated input interface; 1 ports photoelectric isolated output interface; 1 port 0-10V spindle speed analog output interface can change to PWM output;. Support all version of Mach3;.
BrandUCONTRO #ad
ManufacturerUCONTRO #ad