Top 10 Bathroom Fan Timer Switch – Electronics Features

As an Amazon Associate I earn from qualifying purchases.

1. Leviton


Leviton LTB30-1LZ Decora 1800W Incandescent/20A Resistive-Inductive 1HP Preset 5-10-15-30 Minute Countdown Timer Switch, White/Ivory/Light Almond faceplates included

Leviton #ad - Can be used for lighting, hot tubs, heat lamps, attic and exhaust fans. Installation instructions included and 3 way only Works with Vizia + Remote VP0SR sold separately. Simple press and hold override timer function. 120 vac, 600 watts cfl, 1hp, single pole 3 way or more locations, 60 Hertz, 5A LED, 20A resistive/inductive, 1800 watts Incandescent, neutral required. White assembled on device, ivory and light almond included colors may vary. 4 presets: 5-10-15-30 minutes.
BrandLeviton #ad
ManufacturerLeviton #ad
Height4.5 Inches
Length3 Inches
Weight0.68 Pounds
Width4.5 Inches
Part NumberZPV-4202
Warranty2 Year Limited



1-5-10-15-20-30 Min Settings with Manual Override, ENERLITES Countdown Timer Switch for bathroom fans and household lights, UL Listed, HET06A-R, Always On Blue LED, Neutral Wire Required, White

ENERLITES #ad - Specifications: ul listed, motor: 1/4 hp, fluorescent: 800va light bulbs, supports LED/CFL: Incandescent: 800W, neutral wire required, Single Pole Switch.

Blue led light stays on, closet, easy to locate in darkness. Wall Plate sold separately. Replaces standard in wall light switches, fan switches or spring loaded timers for energy saving, convenience and lighting and fan control. Ideal for bathroom, laundry room, spa; Due to the bright LED light, pantry, garage, bedrooms are not recommended for this feature. Automate the shut off operations of all types of lights including LEDs, CFLs, fans and heaters at the time pre-set. Six pre-set options: 1min, 10min, 5min, 15min, 20min or 30min; Simply push the button to set countdown time preference.
ManufacturerTop Greener Inc #ad
Height2.73 Inches
Length1.71 Inches
Width1.7 Inches
Part NumberHET06A-R-W

3. GE


Ideal for Lights, Exhaust Fans, GE Push-Button Countdown Timer Switch, 15318, Heaters, Wall Plate Included, No Neutral Wire Needed, 5-15-30 Minute/1-2-4 Hour, ON/Off

GE #ad - Includes a single décor wall plate and fits most single or multi-gang rocker plates. Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer.

Ratings – 125vac 60 Hz: 6. 4a resistive, 800va ballast, 800W Tungsten, 1/4 HP. Led lights will stay on when wired device is ON without an end time. Blue led indicator lights show last used preset blinks every 20 seconds. Timer is great for use with lights, exhaust fans, and heaters. Choose from the following preset countdowns: 5 min, 30 min, 15 min, 2 hour, 1 hour, or 4 hour. On/off push button also allows you to turn the wired device ON or OFF without an end time. Easy direct wire installation; does not require a neutral wire ground wire is required. Compatible with incandescent, CFL and LED bulbs.
BrandGE #ad
ManufacturerJasco Products Company, LLC #ad
Height6.88 Inches
Length2.24 Inches
Weight2.3 Pounds
Width4.78 Inches
Part Number15318



Mechanical Switch,for Bathroom Fan,Lights Timer, 2 Free Plate White and Silver Metallic, BN-LINK Heavy Duty 60-Minute in-Wall Spring Loaded Countdown Timer

BN-LINK #ad - Works with lamps, 625 w ballast, fans and other appliances. Easily installs in place of existing wall switch, Fits any single or multi-Gang decorator or toggle switch plate. Automatically turns off after selected time, up to 60 minutes. Directly wire this timer into a standard light switch standard toggle or decorator plate. Wall plate Included. Ratings: 125-volt, 2500-watt resistive/8-Amp, 1000-Watt tungsten/5-Amp, 60 Hz.20-amp, 1 HP.
BrandBN-LINK #ad
ManufacturerCentury Products #ad
Height2 Inches
Length4.1 Inches
Weight0.35 Pounds
Width2 Inches
Part NumberBND-60/U48



Night Light LED Indicator, Wall Light Timer Switch, Bathroom Timer Switch, Fan Switch Timer, Neutral Wire Required, White, ENERLITES HET06-R-2PCS Countdown Timer Switch, 2-Pack, 5 min – 4 hrs

ENERLITES #ad - Neutral wire required*, 15a resistive, 1-Year, UL Listed. Mode 2: led stays on during the selected time delay then shuts off. Timer light switch: controls the ON/OFF operation of lights, fans, air conditioner and heaters according to the countdown time set.

Mode 1: blue led light flashes twice indicating setting success then stays off. Countdown timer: six preset countdown time options: 5, 10, 2 or 4 hrs; Bottom button for re-set. Energy efficient: ideal energy saving solution for bedroom, sprinkle system, exhaust fans, garage and laundry room applications. Specifications: 120v, 1000w tungsten, 1/2hp motor, electronic ballast/led 5a or 600w. Conserve energy and only leave the motor on as needed. Replaces any standard wall switch, 30 or 60 mins, fits any standard decorator wall plate.
ManufacturerEnerlites #ad
Height4 Inches
Length1.73 Inches
Width1.47 Inches
Part NumberHET06-W-2PCS

6. Maxxima


Maxxima 1875 Watt 7 Button Countdown Timer Switch Maximum 60 Minutes Delay, Wall Plate included, 1/2 HP Perfect for Bathroom Exhaust Fans

Maxxima #ad - Incandescent 1800 watt, flourescent 1200va. Fan motor 1/2hp, voltage - 120vac, 60Hz, Single Pole Circuit Load. Never worry about leaving lights or bathroom fans on for long periods of time. The timer indicator led will flash for the last 10 Seconds of the selected time, letting you know when its about to shut off - timer can also be set to Constant On Mode. Etl approved, wall Plate, indoor use Only, Mounting Screws included.6 pre-set times ranging from 1-60 Minutes, to have your lights remain on, and then automatically turn off.
BrandMaxxima #ad
ManufacturerMaxxima #ad
Weight0.07 Pounds
Part NumberMEW-PT1800



ENERLITES Countdown Timer Switch for bathroom fans and household lights, Always On Blue LED, HET06A, Neutral Wire Required, White, 2 Pack, 1-5-10-15-20-30 Min Settings with Manual Override, UL Listed

ENERLITES #ad - Bathroom timer switch neutral wire required* incandescent: 800W; Fluorescent: 800VA light bulbs ; Motor: 1/4HP; Single pole ; Wall Plate included. Not suggested for bedroom due to bright LED night light.

Save energy and never leave the lights and fan on longer than needed. Countdown timer switch replaces standard in wall light switch, fan switch or spring loaded timer for energy saving, convenience and lighting control / fan control. Led night light indicator stays on, pantry, easy locating in darkness. Ideal for bathroom, garage, closet, and laundry room.7 button timer switch includes push button to set the countdown timer switch: 1 min, 10 min, 15 min, ideal for bathroom, 5 min, 20 min or 30 min, laundry room fan or light control. In wall countdown timer automatically turns off all types of ventilation fans, ceiling fans, motors and lights including LEDs/CFLs at the time you set.
ManufacturerENERLITES #ad
Height2.5 Inches
Length6.25 Inches
Weight0.77 Pounds
Width5.25 Inches
Part NumberHET06A-W-2PCS

8. Lutron


Single-Pole, MA-T51-WH, White, Lutron Maestro Countdown Timer for Fans or Halogen and Incandescent Bulbs

Lutron #ad - Includes 1 maestro Countdown Timer; coordinating wallplate sold separately. Tap on to start timer, touch rocker to adjust countdown time. For use with incandescent and Halogen bulbs only. Saves energy by automatically turning off a fan or light. Control up to 3 amp fan or up to 600 watts of incandescent halogen bulbs; minimum requirement of 03 amps or 40 Watts. Use with exhaust fans to reduce moisture, mold and mildew in bathrooms. Use with lighting to ensure lights are never left on for a long period of time.
BrandLutron #ad
ManufacturerLutron #ad
Height0.3 Inches
Length4.69 Inches
Weight0.25 Pounds
Width2.94 Inches
Part NumberMA-T51-WH
Warranty1 year limited warranty on materials and manufacture

9. Etoolcity


Etoolcity Preset 1-5-15-20-30 Min Settings, Manual On/Off, 1800W, Neutral Wire Required, LED Indicator, Countdown Timer Switch, Ideal for Bathroom Exhaust Fans and Lights

Etoolcity #ad - Also capable to remind users which option is now working. Automatic & manual control: simply push buttons of 1/5/10/15/20/30 minutes to set countdown time preference.

Led light indicates selected: blue LED lights will stay on, easy to locate in darkness. Ratings- 120/220 vac, 50-60 Hz. Easy direct wire installation: fits into any standard eletrical 1-gang wall box. Neutral wire required. Versatile application: timer switch is great for household use with bathroom lights and exhaust fans, suction pumps, air conditioner and other appliances. On/off push buttons also allow users to manually turn the wired appliance ON or OFF without an end time. Safe and reliable: made from flame-retarding materials, this timer switch has UL-listed components and higher power allowance up to 1800W.
BrandEtoolcity #ad
ManufacturerEtoolcity #ad
Height1.68 Inches
Length2.32 Inches
Width1.6 Inches



5 min – 4 hours, HET06-4H-W, Wall Light Timer Switch, Bathroom Timer Switch, Fan Switch Timer, White, UL Listed, ENERLITES Countdown Timer Switch, Night Light LED Indicator, Neutral Wire Required

ENERLITES #ad - Energy saving - 100% satisfaction and never worry about wasting energy in unoccupied rooms, with 1-year. Descriptions - 120 vac, 60 hz. Wall Plate sold separately. Operating temperature: 32°f to 131°f 0°C to 55°C Humidity: 95%RH, non-condensing.

Incandescent: 1800w. Neutral wire required. Countdown timer switch – press a button to set a countdown time for your light or bedroom ceiling fan, heater, and bathroom exhaust fan. Never worry about wasting energy in unoccupied rooms. Mode 1: blue led light flashes twice indicating setting success then stays off. 6 preset options - pick a timer option from 5 min, 2 hour, 60 min, 30 min, 10 min, and 4 hour time lapse; or use the manual button to turn your LED/Fluorescent light bulb manually on and off. Fluorescent: 1200va. Mode 2: led stays on during the selected time delay then shuts off. Motor ½hp.
ManufacturerTop Greener Inc #ad
Height4.72 Inches
Length2.95 Inches
Width2.17 Inches
Part NumberHET06-4H-W