Top 10 AMTECH NC-559-V2-TF tacky Flux – Welding Equipment & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Amtech

#ad

AMTECH NC-559-V2-TF clean-free tacky flux for hand-soldering Tin/Lead, 10g syringe kit

#ad
Amtech #ad - Keep in a room temperature - do not refrigerate. Use supplied dispensing tip and plunger to manually control the flow. Loaded with fire-retardant properties step-activated as heat increases - soldering Sn10/Pb88/Ag2 is no different from Sn63/Pb37 although alloys operate within 100°C difference.

Excellent tackiness - holds components in-place allowing easy repositioning using technics like "dancing" a component with hot air. Genuine product made in the usa by amtech manufacturING LLC, every original shipment includes AMTECH Soldering Profiles card. Rosin-based, low activity no-clean tacky solder flux specifically designed for hand-operations with leaded alloys - manual Sn/Pb rework, with any basic, stencil hand-printing and tin/lead BGA reballing. Mighty action - a noticeable booster for copper ions while wicking the workspace.

Suitable for any level of training, readily available amateur soldering tools. Exceptional wetting - takes over tin/lead alloy, puts an operator in control. Fills the workspace with distinctive pleasant pine scent -  has been a prime choice for electronics and automotive repair industry for a decade. High temp - quickly breaks-up lead-free joints for further leaded repair without losing properties up to 300°C/600°F. Optimal viscosity - 36-48 malcom @ 10 rpm/25°c x103mpa/s allowing smooth flow from a syringe.
BrandAmtech #ad
ManufacturerAMTECH MANUFACTURING LLC #ad
Part NumberTF-V2-010-KIT

2. Amtech

#ad

AMTECH NC-559-V2 no-clean tacky solder flux, 30cc kit

#ad
Amtech #ad - Highly praised by advanced reworks community for mighty long-lasting action and easy cleaning - clear residue evaporates with hot air and doesn't short components. Optimal viscosity - 40-52 malcom @ 10 rpm/25°c x103mpa/s. Applicable for a syringe, BGA sphere attachment and reballing using standard tin/lead alloys not designed for lead-free.

Do not discard original nozzle cap, tightly close the cap while not using the flux. Activated residue is clear and non-corrosive - can be left on board for multiple SMT assemblies manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from air and subsequently cause corrosion. Surface insulation resistant. Use supplied blunt metal dispensing tip and plunger to manually control the flow.

Rol0 flux classification - rosin based, rework, stencil printing, low activity no-clean tacky solder flux for professional/industrial use. No copper mirror breakthrough. Wide process window - excellent performance on flip chip bumping and chip scale packaging sites. Industrial air syringe is intended for pneumatic dispensing machines, the flux is trapped inside with a piston stopper - do not remove the piston as it seals the flux from the air. Halide-free
BrandAmtech #ad
ManufacturerAMTECH MANUFACTURING LLC #ad
Part Number16160W
Model16160W-TF-NC559V2-030S

3. Amtech

#ad

AMTECH NC-559-ASM-TF no-clean tacky solder flux ROL0 10cc kit USA 16095K

#ad
Amtech #ad - Highly praised by advanced reworks community for mighty long-lasting action and easy cleaning - clear residue evaporates with hot air and doesn't short components. A plunger is to push on the piston and not necessary snuggly fitting AMTECH syringe, a plunger can be loose. Low electrochemical migration
BrandAmtech #ad
ManufacturerInventec Perfomance Chemicals USA #ad
Part Number16095K
Model16095K-TF-NC559ASM-010S

4. Amtech

#ad

10cc kit, AMTECH NC-559-V2 no-clean tacky solder flux

#ad
Amtech #ad - Genuine product made in the usa by amtech manufacturing llc. This product is high-temperature compatible. Low electrochemical migration
BrandAmtech #ad
ManufacturerInventec Perfomance Chemicals USA #ad
Part Number16150W
Model16150W-TF-NC559V2-010S

5. Amtech

#ad

30cc syringe kit, AMTECH RMA-223-TF universal no-clean tacky solder flux ROL0

#ad
Amtech #ad - Reach compliant. Every original shipment would include AMTECH Soldering Profiles card. No copper mirror breakthrough. Do not discard original nozzle cap, tighten the cap inside the nozzle while not using the flux. Contains uV-tracer for fast detection of splatter.

Industrial air syringe is intended for pneumatic dispensing machines, the flux is trapped inside with a piston stopper - do not remove the piston as it seals the flux from the air. Use supplied blunt metal dispensing tip and plunger to manually control the flow. Surface insulation resistant. Applicable for a syringe, stencil printing, BGA sphere attachment and reballing using standard tin/lead alloys won't solder lead-free metals. Activated residue is amber and non-corrosive - can be left on board for multiple SMT assemblies manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from the air and subsequently cause corrosion.

Rol0 flux classification - rosin based, rework, low activity no-clean tacky solder flux for professional/industrial use. Halide-free
BrandAmtech #ad
ManufacturerInventec Performance Chemicals USA #ad
Weight30 Grams
Part Number16420K
Model16425K-TF-RMA223-030S

6. Amtech

#ad

10g syringe kit, AMTECH NC-559-V2 no-clean tacky solder flux for hand-soldering Tin/Lead

#ad
Amtech #ad - Keep in a room temperature - do not refrigerate. Rosin-based, stencil hand-printing and tin/lead bga reballing. Excellent tackiness - holds components in-place yet allowing an easy repositioning using technics like "dancing" a component with hot air.

Clear residue can be easily removed with hot air, can be left on board for multiple SMT assemblies manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, doesn't short components, foam swab and basic solvents like d-limonene or isopropanol. Optimal viscosity - 40-52 malcom @ 10 rpm/25°c x103mpa/s allowing smooth flow from a syringe. Loaded with fire-retardant properties step-activated or curtailed as heat increases or subsides - soldering Sn10/Pb88/Ag2 is no different from Sn62/Pb37 although alloys operate within 100°C range difference.

Suitable for any level of training, with any basic, low activity no-clean tacky solder flux specifically designed for hand-operations with leaded alloys - manual Sn/Pb rework, readily available amateur soldering tools. Use supplied dispensing tip and plunger to manually control the flow. Low electrochemical migration
BrandAmtech #ad
ManufacturerAMTECH MANUFACTURING LLC #ad
Weight0.02 Pounds
Part Number16150
ModelNC-559-V2-TF

7. Amtech

#ad

30g syringe kit, AMTECH NC-559-ASM-TF clean-free universal industrial tacky flux with UV-tracer

#ad
Amtech #ad - Surface insulation resistant. Genuine product made in the usa by amtech manufacturing llc, do not remove the piston stopper! Do not discard original nozzle cap, every original shipment includes AMTECH Soldering Profiles card.

Rol0 classification - non-corrosive, doesn't short components, can be left on board for multiple SMT assemblies manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from air and subsequently cause corrosion. No copper mirror breakthrough. Long process window - continue a project where it was left of, once heated the flux should flow again! Industrial viscosity - 40-52 malcom @ 10 rpm/25°c x103mpa/s providing for smooth flow. Low electrochemical migration
BrandAmtech #ad
ManufacturerAMTECH MANUFACTURING LLC #ad
Part NumberTF-ASM-030-KIT

8. Amtech

#ad

10cc syringe kit, AMTECH VS-213-A-TF universal no-clean tacky solder flux ROL0

#ad
Amtech #ad - Compatible with leaded and/or lead-free alloy systems up to 250°C/500°F. Every original shipment would include AMTECH Soldering Profiles card.

Surface insulation resistant. Industrial air syringe is intended for pneumatic dispensing machines, the flux is trapped inside with a piston stopper - do not remove the piston as it seals the flux from the air. The most recent and the most up-to-date no-clean tacky flux formulation by AMTECH. Vs-213a-tf is reach compliant, halogen-free and universal - a no-clean flux for demands of XXI century. Do not discard original nozzle cap, tighten the cap inside the nozzle while not using the flux. Halide-free
BrandAmtech #ad
ManufacturerInventec Performance Chemicals USA #ad
Part Number16701K
Model16701K-TF-VS213A-010S

9. YIHUA

#ad

YIHUA 8786D I 2 in 1 Hot Air Rework and Soldering Iron Station with °F /°C, Cool/Hot Air Conversion, Digital Temperature Correction and Sleep Function

#ad
YIHUA #ad - Questions and Suggestions are welcome. Choose yihua with confidence- this product includes quality accessories and tools to provide an optimal experience for your work. A dual system with advanced designs - this station combines soldering station and hot air rework station for versatile uses when it provides dual display system & dual power switch and other advanced software functions.

Comply with UL StandardU. S. Important Evaluation for Safety Electric Appliances. Caution: must not be plugged directly into a 220V~240V electrical outlet. Plus, our team is providing professional assistance 24/7 right on Amazon. Intelligent temperature control - with the high-end precision PID program, the station can monitor and correct the actual temperatures at high speed with fast temperature compensation to provide the accuracy that your projects ask for.

Should the hot air gun stop putting out air unusually during use, the program will automatically set an alarm and cut off the power to the heating element to ensure safety. 12-month usA Warranty Exclusive. Anti-static design/ esd safe Design - It can help prevent static or leakage damage to components. Note: spare parts are readily available in this store. Exclusive fail-safe protection- this is an upgraded & exclusive safety design. This model works on 110-127V with its USA plug.
BrandYIHUA #ad
ManufacturerYIHUA #ad

10. ChipQuik

#ad

SMD291, Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip

#ad
ChipQuik #ad - Use with existing rework equipment or temp controlled soldering irons. Remove qfds, plccs, soics and chip components without costly equipment. Special removal alloy has excellent wetting ability. Safe, affordable, easy and won't damage sensitive components. Low melting temperature.
BrandChipQuik #ad
ManufacturerChipquik #ad
Height1.25 Inches
Length5.5 Inches
Weight1 Pounds
Width3 Inches
Part NumberSMD291
ModelSMD291