Top 10 2-1/8 in. Satin Nickel Closet Door Finger Pull – Pocket & Bi-Fold Door Hardware

As an Amazon Associate I earn from qualifying purchases.

1. KOVOSCH

#ad

Easy Snap-in Installation, KOVOSCH 6 Pack Closet Door Finger Pull Satin Nickel- 2-1/8” Round Sliding Finger Door Pull

#ad
KOVOSCH #ad - Easy installation: easy and quick snap-in installation No Nails Required. Durable: kovosch closet door finger pull Is Made Of Stamped Steel To Outlast Years Of Use.

Refund or replacement For Any Quality Problem. Free of sharp edge: the surface and all edges of kovosch Finger Pull Are Finely Chamfered With Hand Polished By Hours, It Touches Soft, Smooth And Quality Feeling. Universal: these stamped steel mortise cup pulls are designed for Use On By-Passing Closet Door Systems. Universal design is used on By-Passing Sliding Panel Doors Of Closets And Furniture. The door pulls fits a 5/16”depth x 2-1/8" Diameter Opening Hole. Reliable quality: if there is any quality problem, Please Feel Free To Contact Us.
BrandKOVOSCH #ad
ManufacturerKOVOSCH #ad

2. DonYoung

#ad

Sliding Door, 6PCS Closet Door Finger Pull Satin Nickel- 2-1/8”, Easy Snap-in Circular Sliver Closet Door Pulls, Pocket Door, Perfect for Cabinet Door, Bi-Pass Door, No Nails Needed

#ad
DonYoung #ad - Attention: we suggest that buyers install 2 finger pull on each single door. Guaranteewhether to buy or not, our company provide 24-hour online service so as to solve the customers' worries behind.

Our customer service Team will figure out the issue and provide a satisfying solution accordingly. Item arrives damaged/ missing parts receivedIf the above issue occurs, whether pre-sale and after-sale, please email us via amazon immediately. Package contents 6 x door finger Pulls. Material & dimensionsmade of stamped steel, satin nickel. Inner diameter: 2. 0'', depth: 03", outer diameter: 2-2/5'', diameter Opening Hole: 2-1/12". Especially for on pocket door, bi-parting door systems, sliding barn door, cabinets and TV stand door. No nails needed, easy to install. Designsnap-in design. Qualityall products are tested and inspected strictly before being released on the market.
BrandDonYoung #ad
ManufacturerBillion Hardware #ad
Part NumberGDPS006

3. HOMOTEK

#ad

Satin Nickle Finish, No nail require Fits a 5/16”Depth x 2-1/8" Diameter Opening Hole, HOMOTEK 2 Pack Closet Door Finger Pull 2-1/8”, Easy Snap in Installation

#ad
HOMOTEK #ad - Reliable quality - your experience with the product is our guideline. If you are not fully satisfied, simply send them back for a NEW set or a full refund! No questions asked!3 popular finishes are Available For Your Choice.

Satin nickel, Oil Rubbed Bronze, Black. Universal-these stamped steel mortise cup pulls are designed for use on By-Passing Closet Door Systems. Universal design is used on By-Passing Sliding Panel Doors Of Closets And Furniture. Enough for use- 2 pieces in total. If you shall have any concerns, send us an e-mail and we will get to you within 24 HOURS. Easy to install-easy snap in installation No nail require. Installation note-item overall size: 2-7/16 x 3/8”. These closet door pulls fit a 2-1/8 in. Outside diameter And a Depth Of 5/16 In. Hole. Refer to our Drawing For More Details.
BrandHOMOTEK #ad
ManufacturerHOMOTEK #ad
Part NumberFP-001-SN-2PK

4. DonYoung

#ad

Sliding Door, Easy Snap-in Circular Sliver Closet Door Pulls, 4PCS Closet Door Finger Pull Satin Nickel- 2-1/8”, Pocket Door, Perfect for Cabinet Door, No Nails Needed, Bi-Pass Door

#ad
DonYoung #ad - Designsnap-in design. No nails needed, easy to install. Especially for on pocket door, sliding barn door, bi-parting door systems, cabinets and TV stand door. Guaranteewhether to buy or not, whether pre-sale and after-sale, our company provide 24-hour online service so as to solve the customers' worries behind.

Attention: we suggest that buyers install 2 finger pull on each single door. Package contents 4 x door finger Pulls. Material & dimensionsmade of stamped steel, outer diameter: 2-2/5'', Satin Nickel. Qualityall products are tested and inspected strictly before being released on the market. Item arrives damaged/ Missing parts receivedIf the above issue occurs, please email us via amazon immediately. Inner Diameter: 2. 0'', depth: 03", diameter opening Hole: 2-1/12". Our customer service Team will figure out the issue and provide a satisfying solution accordingly.
BrandDonYoung #ad
ManufacturerBillion Hardware #ad
Part NumberGDPS004

5. Design House

#ad

Design House Hardware 202788 2-1/8" Closet Finger-Pull Pocket, Satin Nickel

#ad
Design House #ad - Made of steel to outlast years of use. This finger-pull pocket measures 2-1/2-inches in diameter. Finished with satin nickel to match any decor or closet color. Ideal for sliding closet doors, this pocket allows you to smoothly open and close the door when needed. This finger-pull pocket measures 2-1/2-inches in diameter. Finished with satin nickel to match any decor or closet color. Made of steel to outlast years of use.
BrandDesign House #ad
ManufacturerDesign House #ad
Height2.44 Inches
Length2.44 Inches
Weight0.1 Pounds
Width0.39 Inches
Part Number202788
Model202788
Warranty1-Year limited warranty

6. KOVOSCH

#ad

KOVOSCH 8 Pack Closet Door Finger Pull Satin Nickel, 2-1/8” Round Sliding Closet Finger Door Pulls, Easy Snap in Installation

#ad
KOVOSCH #ad - Durable: kovosch closet door finger pull Is Made Of Stamped Steel To Outlast Years Of Use. Free of sharp edge: the surface and all edges of kovosch Finger Pull Are Finely Chamfered With Hand Polished By Hours, It Touches Soft, Smooth And Quality Feeling. Easy installation: easy and quick snap-in installation No Nails Required. Universal: these stamped steel mortise cup pulls are designed for Use On By-Passing Closet Door Systems. Universal design is used on By-Passing Sliding Panel Doors Of Closets And Furniture. The door pulls fits a 5/16”depth x 2-1/8" Diameter Opening Hole.
BrandKOVOSCH #ad
ManufacturerKOVOSCH #ad
Part NumberSN002

7. HOMOTEK

#ad

Satin Nickle Finish,Fits a 5/16”Depth x 2-1/8" Diameter Opening Hole, Easy Snap in Installation, HOMOTEK 4 Pack Closet Door Finger Pull 2-1/8”

#ad
HOMOTEK #ad - Reliable quality - your experience with the product is our guideline. Outside diameter And a Depth Of 5/16 In. Hole. Refer to our Drawing For More Details. Universal-these stamped steel mortise cup pulls are designed for use on By-Passing Closet Door Systems.

Universal design is used on By-Passing Sliding Panel Doors Of Closets And Furniture. Enough for use- 4 pieces in total. 4 popular finishes are Available For Your Choice. Satin nickel/ oil Rubbed Bronze/Antique Brass/Chrome. Easy to install-easy snap in installation No nail require. If you shall have any concerns, send us an e-mail and we will get to you within 24 HOURS. If you are not fully satisfied, simply send them back for a NEW set or a full refund! No questions asked! Installation note-item overall size: 2-7/16 x 3/8”. These closet door pulls fit a 2-1/8 in.
BrandHOMOTEK #ad
ManufacturerHOMOTEK #ad
Height0.38 Inches
Length2.5 Inches
Weight0.04 Pounds
Width2.5 Inches
Part NumberFP001

8. PRIME-LINE

#ad

Stamped Steel, Pack of 2, Satin Nickel Finish, Prime-Line N 7209 Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter

#ad
PRIME-LINE #ad - These closet door pulls have a 2-1/8 in. Stamped steel construction. These stamped steel mortise cup pulls are designed for use on by-passing closet door systems. Includes small fasteners. Satin nickel finish. Outside diameter and a depth of 5/16 in.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height0.31 Inches
Length2.12 Inches
Width2.12 Inches
Part NumberN 7209
ModelN 7209
WarrantyGoods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

9. Enconker

#ad

Easy Snap-in Installation for 5/16”Depth x 2-1/8" Diameter Opening Hole, Round Insert Bypass Closet Door Handle, Sliding Door Hardware Satin Nickel, Enconker 6 Pack Closet Door Finger Pull 2-1/8”

#ad
Enconker #ad - Widely used-our stamped steel mortise cup pulls can be widely used for sliding door, wardrobe, by-passing closet door systems and furniture that allows you to open and close the doors more smoothly. Easy installation-no nails required, easy and quick pop in installation.

If our products have any quality problems, please feel free to contact us, we will provide you with a satisfactory solution within 24 hours. Professional manufacturing-we have been in professional hardware manufacturing for over 10 years. Individually each packing in plastic bag to prevent scratches. Guarantee-we will bring you outstanding shopping experience during pre-sale and after-sale.

Our r&d team will make thousands of tests for surface and steel materials before manufacturing that can make our products for long term use of years. Packing-6*door finger pulls no screws needed. The door pull fits a 5/16’’ Depth*2-1/8” Opening Hole. Made of high-quality stamped steel. The surface and edges are soft and smooth touch.
BrandEnconker #ad
ManufacturerEnconker #ad

10. NUK3Y PRODUCTS K3

#ad

4-Pack Satin Nickel, Nuk3y Easy Snap in Closet Door Finger Pull, 2-1/8"

#ad
NUK3Y PRODUCTS K3 #ad - 4 pack. Fits a 2-1/8 in. Steel Construction. Diameter hole. Varity Finishes. Easy snap in installation No nail require.
BrandNUK3Y PRODUCTS K3 #ad
ManufacturerNuk3y #ad
Height2.5 Inches
Length2.5 Inches
Width0.75 Inches