Teensy 3.5 Without Pins

#ad
PJRC MK64FX512 #ad - Microcontroller chip MK64FX512VMD12. 120 mhz arm cortex-m4 with floating point unit 512k flash, 4k eeprom microcontroller chip mk64fx512vmd12 1 can bus port 16 general purpose dma channels 5 volt tolerance on all digital i/o pins 62 i/o pins 42 breadboard friendly 25 analog inputs to 2 adcs with 13 bits resolution 2 analog outputs dacs with 12 bit resolution 20 pwm outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, capable of full 100 Mbit/sec speed Native 4 bit SDIO micro SD card port I2S Audio Port, 192K RAM, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 3 I2C Ports Real Time Clock 120 mhz arm cortex-m4 with Floating Point Unit.

512k flash, 192k ram, 4k eePROM.

#ad



PJRC Teensy 4.0 Without pins

#ad
PJRC #ad - Teensy 4. 0 features an arm cortex-m7 processor at 600 MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. 2 usb ports, both 480 MBit/sec. 1024k ram 512k is tightly coupled. 2048k flash 64k reserved for recovery & EEPROM emulation. 3 can bus 1 with CAN FD. 1024k ram 512k is tightly coupled 2048k flash 64k reserved for recovery & eeprom emulation 2 usb ports, all interrrupt capable 14 analog pins, all with 16 word fifo 3 i2c, all with 4 byte fifo 7 serial, both 480 mbit/sec 3 can bus 1 with can fd 2 i2s digital Audio 1 S/PDIF Digital Audio 1 SDIO 4 bit native SD 3 SPI, all with 4 byte FIFO 32 general purpose DMA channels 31 PWM pins 40 digital pins, 2 ADCs on chip Cryptographic Acceleration Random Number Generator RTC for date/time Programmable FlexIO Pixel Processing Pipeline Peripheral cross triggering Power On/Off management Actual size is 1.

4 by 07 inch, same form-factor as Teensy 3. 2. 2 i2s digital Audio.

#ad



PJRC Teensy 3.2

#ad
PJRC 6485230 #ad - 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. 2 i2s digital Audio. 2 usb ports, both 480 MBit/sec. Each Teensy 3. 2 comes pre-flashed with a bootloader so you can program it using the on-board usb connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy! The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects.

2048k flash 64k reserved for recovery & EEPROM emulation. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. 3 uarts serial ports spi, i2c, can bus, i2s, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.

PJRC Teensy 3.2 #ad - 3v add-on boards that require a little more power. Additionally, if it is used within the Teensy 3. 1 limits of operation, the Teensy 3. 2 and 3.

#ad



DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield

#ad
DEPEPE #ad - 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. Made of copper and plastic. 2 i2s digital Audio. Package contains: 15pcs 40pin male headers 15pcs 40pin female headers Pitch: 2. 54mm number of pins: 40pin 1024k ram 512k is tightly coupled. 2 usb ports, both 480 MBit/sec.

7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Great tools for arduino prototype shield. 3 uarts serial ports spi, i2s, can bus, i2c, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.

DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield #ad - 3v add-on boards that require a little more power. Come with 15pcs male headers and 15pcs female headers. 3 can bus 1 with CAN FD. Pitch: 2. 54mm, number of pins: 40pin. 2048k flash 64k reserved for recovery & EEPROM emulation.

#ad



Teensy 3.5 with pins

#ad
PJRC #ad - 2 usb ports, both 480 MBit/sec. 120mhz arm cortex-m4 with floating point unit 512K Flash, 192K RAM, 4K EEPROM. 6 serial ports 2 with fifo and fast baud rates 3 sPI Ports 1 with FIFO 3 I2C Ports Real-Time Clock. Usb full speed 12mbit/sec port ethernet mac, capable of full 100mbit/sec speed Native 4-bit SDIO micro SD card port I2S Audio Port, 4-Channel Digital Audio Input & Output 14 Hardware Timers.

Pitch: 2. 54mm, number of pins: 40pin. 3 uarts serial ports spi, i2s, i2c, can bus, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3v add-on boards that require a little more power.

Teensy 3.5 with pins #ad - Come with 15pcs male headers and 15pcs female headers. 1 can bus port 16 general purpose dma channels 5v tolerance on all digital i/o pins 62 i/o pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13-bit resolution 2 Analog Outputs DACs with 12-bit resolution 20 PWM Outputs Teensy 3. 6 has 22 PWM.

1024k ram 512k is tightly coupled. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM.

#ad



Audio Adaptor Board for Teensy 3.0 - 3.6

#ad
PJRC . #ad - 2 i2s digital Audio. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. 3 uarts serial ports spi, i2s, i2c, can bus, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, wiz820io ethernet, with the ability to directly power an ESP8266 Wifi, and other 3.

3v add-on boards that require a little more power. Come with 15pcs male headers and 15pcs female headers. The sgtl5000 chip operates in "slave mode, " where all its clock pins are inputs. Pitch: 2. 54mm, number of pins: 40pin. Type of row: single row, type of pin: straight. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers.

Audio Adaptor Board for Teensy 3.0 - 3.6 #ad - All 3 clocks are created by the Teensy. 3 can bus 1 with CAN FD. Usb full speed 12mbit/sec port ethernet mac, capable of full 100mbit/sec speed Native 4-bit SDIO micro SD card port I2S Audio Port, 4-Channel Digital Audio Input & Output 14 Hardware Timers. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, and 3 clocks, LRCLK 44.

#ad



Teensy 3.6 Without Pins

#ad
PJRC #ad - 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs. The sgtl5000 chip operates in "slave mode", and 3 clocks, where all its clock pins are inputs. 180 mhz arm cortex-m4 with Floating Point Unit. 2048k flash 64k reserved for recovery & EEPROM emulation.

Teensy 3. 5 with microcontroller Chip MK64FX512VMD12. 2 usb ports, both 480 MBit/sec. Type of row: single row, type of pin: straight. Made of copper and plastic. 32 bit arm cortex-m4 72 mhz cpu m4 = dsp extensions 256k flash Memory, 64K RAM, 2K EEPROM. All 3 clocks are created by the Teensy. 1m flash, 256k ram, 4k eePROM.

Teensy 3.6 Without Pins #ad - The i2c pins sda and scl are used to control the chip and adjust parameters. Great tools for arduino prototype shield. Pitch: 2. 54mm, number of pins: 40pin. 120mhz arm cortex-m4 with floating point unit 512K Flash, 192K RAM, 4K EEPROM. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, LRCLK 44.

#ad



Teensy 3.6 with pins

#ad
PJRC #ad - This audio adapter lets you easily add high quality 16 bit, 44. 1 khz sample rate cD quality audio to your projects with a Teensy 3. 2, 3. 5 or 3. 6. The audio chip connects to teensy v3 using 7 signals. 3 can bus 1 with CAN FD. 1m flash, 256k ram, 4k eePROM. 2 i2s digital Audio. 180 mhz arm cortex-m4 with floating point unit 1m flash, capable of full 100 mbit/sec speed native 4 bit sdio micro sd card port i2s audio port, 4k eeprom microcontroller chip mk66fx1m0vmd18 usb high speed 480 mbit/sec port 2 can bus ports 32 general purpose dma channels 22 pwm outputs 4 i2c ports 11 touch sensing inputs 62 i/o pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs DACs with 12 bit resolution 22 PWM Outputs USB Full Speed 12 Mbit/sec Port Ethernet mac, 256K RAM, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports 2 with FIFO & Fast Baud Rates 3 SPI Ports 1 with FIFO 4 I2C Ports Real Time Clock 1024k ram 512k is tightly coupled.

Great tools for arduino prototype shield. 2 usb ports, both 480 MBit/sec. 1 can bus port 16 general purpose dma channels 5v tolerance on all digital i/o pins 62 i/o pins 42 breadboard friendly 25 Analog Inputs to 2 ADCs with 13-bit resolution 2 Analog Outputs DACs with 12-bit resolution 20 PWM Outputs Teensy 3.

Teensy 3.6 with pins #ad - 6 has 22 PWM. 6 serial ports 2 with fifo and fast baud rates 3 sPI Ports 1 with FIFO 3 I2C Ports Real-Time Clock. Pitch: 2.

#ad



Teensy LC USB Development Board Without Pins

#ad
PJRC DEV-13305 #ad - Type of row: single row, type of pin: straight. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Microcontroller chip MK66FX1M0VMD18. 2 i2s digital Audio. Note: the teensy lc does not come with a micro-B USB cable. Teensy 3. 5 with microcontroller Chip MK64FX512VMD12. 6 serial ports 2 with fifo and fast baud rates 3 sPI Ports 1 with FIFO 3 I2C Ports Real-Time Clock.

The sgtl5000 chip operates in "slave mode", and 3 clocks, where all its clock pins are inputs. 180 mhz arm cortex-m4 with Floating Point Unit. Microcontroller chip MK66FX1M0VMD18. Great tools for arduino prototype shield. All 3 clocks are created by the Teensy. All of this functionality is jammed into a 1. 4 x 0

Teensy LC USB Development Board Without Pins #ad - 7 inch board with all headers on a 01" grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC apart from the Teensy 3. 1? first off, this version has been streamlined to be as cost effective as possible. Obviously, the lc doesn't share a lot of power that the 3.

#ad



Teensy 4.0 With Pins

#ad
PJRC #ad - 3 uarts serial ports spi, i2c, i2s, can bus, IR modulator I2S for high quality audio interface. The teensy 3. 2 adds a more powerful 3. 3 volt regulator, with the ability to directly power an ESP8266 Wifi, WIZ820io Ethernet, and other 3.3v add-on boards that require a little more power. Come with 15pcs male headers and 15pcs female headers.

3 can bus 1 with can fd, 2 i2S Digital Audio. Usb full speed 12mbit/sec port ethernet mac, capable of full 100mbit/sec speed Native 4-bit SDIO micro SD card port I2S Audio Port, 4-Channel Digital Audio Input & Output 14 Hardware Timers. 6 serial ports 2 with fifo and fast baud rates 3 sPI Ports 1 with FIFO 3 I2C Ports Real-Time Clock.

Teensy 4.0 With Pins #ad - . 3 uarts serial ports spi, i2c, & I2S I2S for high quality audio interface. 7 timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers. Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. Great tools for arduino prototype shield.

#ad



Teensy 3.2 with Pins

#ad
PJRC . #ad - Type of row: single row, type of pin: straight. The 32 bit processor brings a few other features to the table as well, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, such as multiple channels of Direct Memory Access, and all pins have interrupt capability.

The sgtl5000 chip operates in "slave mode", and 3 clocks, where all its clock pins are inputs. 180 mhz arm cortex-m4 with Floating Point Unit. The teensy 3. 2 brings a 32 bit arm cortex microprocessor into the mix so you can do some serious number crunching. All 3 clocks are created by the Teensy. 2 usb ports both 480 MBit/Sec.

Teensy 3.2 with Pins #ad - Audio data uses i2s signals, tx to headphones and/or line out and RX from line in or mic, LRCLK 44. 1 khz, bclk 1. 41 mhz and mclK 11. 29 mhz. 3 can bus 1 with CAN FD. Also, it can provide system voltage of 3. 3v to other devices at up to 100mA. 21 high resolution analog inputs 13 bits usable, 16 bit hardware 34 Digital I/O Pins 5V tolerance on Digital Inputs 12 PWM outputs.

#ad