DEWALT DWA5102 Impact Ready Masonry Bit, 1/4″ x 4″ x 6″

#ad
Dewalt DWA5102 #ad - DEWALT DWA5102 Impact Ready Masonry Bit, 1/4" x 4" x 6" #ad - 1/4" hex Shank. Speed tip allows for quick penetration. Commonly used for tap con installation, and brick/block fastening. The dewalt dwa5102 1/4" x 4" x 6" impact ready masonry Bit features an innovative flute design leading to faster material removal for easier drilling. Designed with a 1/4" hex shank for use in impact drivers.

It offers a speed tip which penetrates material quickly. Innovative flute design.

#ad



Bosch IMC06 1/4" Impact MultiConstruction Drill Bit

#ad
Bosch IMC06 #ad - Sharp ground cutting edges - designed for advanced performance. These accessories were engineered by Bosch to provide high-quality carbide heads and advanced sharp ground cutting edges for fast drilling in a wide variety of materials. The bits have steep flutes for material removal in wood and a variety of other materials, providing outstanding versatility.

Bosch impact drill bits provide users with significant convenience and are designed to be the best choice for multipurpose bits. These bits are designed for clean starts and easy-to-use applications. Steep flutes - deliver fast material removal. Hex shanks - allows use in impactors and hammer drill/drivers for added versatility.

Bosch IMC06 1/4" Impact MultiConstruction Drill Bit #ad - Multi-application design - offers drilling in in wood and a variety of other materials. Robust high-quality carbide head - provides fast drilling in materials from masonry to plastic. They have been designed with hex shanks for outstanding bit grip, allowing use in hammer drills and impact drivers.

#ad



Hard-to-Find Fastener 014973237035 Concrete Stud Anchors, 1/4 x 3, Piece-8

#ad
Hard-to-Find Fastener 014973237035 #ad - Sharp ground cutting edges - designed for advanced performance. Finish: Zinc. We also sell coated and stainless products for additional rust resistance. Hex shanks - allows use in impactors and hammer drill/drivers for added versatility. Material: Steel. Multi-application design - offers drilling in in wood and a variety of other materials.

Diameter: 1/4". We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Drill size: 1/4 inch. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

Hard-to-Find Fastener 014973237035 Concrete Stud Anchors, 1/4 x 3, Piece-8 #ad - We stock a wide variety of fasteners ideal for many applications arround the home, automotives, farm, business, and in industry. Length: 3 inches. Robust high-quality carbide head - provides fast drilling in materials from masonry to plastic. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh.

Steep flutes - deliver fast material removal.

#ad



Hard-to-Find Fastener 014973211714 Phillips Flat Tapcon Screws, 1/4 x 1-3/4-Inch, 25-Piece

#ad
Hard-to-Find Fastener 014973211714 #ad - Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. Length: 1-3/4 inch. Material: Steel. Diameter: 1/4". Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.

Sharp ground cutting edges - designed for advanced performance. Length: 3 inches. Diameter: 1/4 inch. Material: Steel. Hex shanks - allows use in impactors and hammer drill/drivers for added versatility. Diameter: 1/4". We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel.

Hard-to-Find Fastener 014973211714 Phillips Flat Tapcon Screws, 1/4 x 1-3/4-Inch, 25-Piece #ad - Steep flutes - deliver fast material removal. Robust high-quality carbide head - provides fast drilling in materials from masonry to plastic. Head style: flat Phillips. We stock a wide variety of fasteners ideal for many applications around the home, farm, automotive, business, and in industry. Finish: Blue ruspert.

#ad



Wej-It Nail-It DN1411 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4" Diameter, 1-1/4" Length Pack Of 100

#ad
Wej-It DN-1411 #ad - Finish: Zinc. The company, founded more than 60 years ago, is headquartered in Norwalk, CT. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations. Sharp ground cutting edges - designed for advanced performance. Steep flutes - deliver fast material removal. For more information, see the specifications sheet.

Wej-It Nail-It DN1411 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4" Diameter, 1-1/4" Length Pack Of 100 #ad - Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, brick, concrete, and stone. Ultimate tensile strength for a static load is 800 lb. Meets fed. Gsa ffs-325 group v, Type 2, Class 2 specifications. Diameter: 1/4". Drive anchor provides a secure hold in concrete, brick, block, and stone.

Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer sold separately to expand and grip the mounting material. Drill size: 1/4 inch. Robust high-quality carbide head - provides fast drilling in materials from masonry to plastic. Material: Steel. Diameter: 1/4".

#ad



Hard-to-Find Fastener 014973237011 Concrete Stud Anchors, 1/4 x 2-1/4, Piece-12

#ad
Hard-to-Find Fastener 014973237011 #ad - Drive anchor provides a secure hold in concrete, brick, block, and stone. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer sold separately to expand and grip the mounting material. Material: Steel. Diameter: 1/4". We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel.

Hard-to-Find Fastener 014973237011 Concrete Stud Anchors, 1/4 x 2-1/4, Piece-12 #ad - In 3, 000-psi unreinforced stone aggregate concrete. Length: 1-3/4 inch. Sharp ground cutting edges - designed for advanced performance. Finish: Zinc. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. Finish: Blue ruspert. Ultimate tensile strength for a static load is 800 lb.

Steep flutes - deliver fast material removal. We also sell coated and stainless products for additional rust resistance. Diameter: 1/4 inch. Drill size: 1/4 inch. Multi-application design - offers drilling in in wood and a variety of other materials. Length: 2-1/4 inches.

#ad



Cash Acme U713 Sharkbite Push Fit Disconnect Tongs, 3/4"

#ad
SharkBite 421344 #ad - Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Drill size: 1/4 inch. Material: Steel. Perfect for joining copper, cpvc or pe-rt pipe, PEX, SharkBite is the no fuss way to fix small leaks or plumb a whole house.

Multi-application design - offers drilling in in wood and a variety of other materials. The sharkbite plumbing fitting is the easiest way to join copper, CPVC, HDPE, or PEX pipe in any combination. Diameter: 1/4". Ultimate tensile strength for a static load is 800 lb. No soldering, no clamps, no glue. Cash Acme.

Cash Acme U713 Sharkbite Push Fit Disconnect Tongs, 3/4" #ad - Our sharkbite push-to-Connect fittings can be removed and reused up to four times. Gsa ffs-325 group v, Type 2, Class 2 specifications. Material: Steel. Length: 2-1/4 inches. Drive anchor provides a secure hold in concrete, block, brick, and stone. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer sold separately to expand and grip the mounting material.

No soldering, clamps, unions, or glue required.

#ad



DEWALT DW5221 1/8-Inch by 3-Inch Carbide Hammer Drill Bit

#ad
Dewalt DW5221 #ad - Material: Steel. Length: 2-1/4 inches. Diameter: 1/4 inch. Drill size: 1/4 inch. Multi-application design - offers drilling in in wood and a variety of other materials. Finish: Zinc. Ultimate tensile strength for a static load is 800 lb. Three flats on shank eliminate bit slipping in chuck. Diameter: 1/4". Rock carbide tip maximizes carbide surface contact for longer bit life.

Four flute design cleans debris out for fast, efficient drilling. Gsa ffs-325 group v, Type 2, Class 2 specifications. Finish: Zinc. One year warranty, one year service contract, 30 day no-risk trial. Length: 3 inches. Diameter: 1/4". Spec. Diameter: 1/4". Drive anchor provides a secure hold in concrete, brick, block, and stone.

DEWALT DW5221 1/8-Inch by 3-Inch Carbide Hammer Drill Bit #ad - Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer sold separately to expand and grip the mounting material. Finish: Blue ruspert.

#ad



DEWALT DW5236 1/2-Inch x 12-Inch Carbide Hammer Drill Bits

#ad
Dewalt DW5236 #ad - Easy to use. Meets fed. Drive anchor provides a secure hold in concrete, block, brick, and stone. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer sold separately to expand and grip the mounting material. Use one-fourth or less of listed maximum values for safe working loads as required by local regulations.

Drill size: 1/4 inch. Sharp ground cutting edges - designed for advanced performance. Shark bite push fit Disconnect Tongs, 3/4 In. Diameter: 1/4". Rock carbide tip maximizes carbide surface contact for longer bit life. Four flute design cleans debris out for fast, efficient drilling. Rock carbide tip maximizes carbide surface contact for longer bit life.

DEWALT DW5236 1/2-Inch x 12-Inch Carbide Hammer Drill Bits #ad - Four flute design cleans debris out for fast, efficient drilling. Cash Acme. Robust high-quality carbide head - provides fast drilling in materials from masonry to plastic. U713. Length: 3 inches. Three flats on shank eliminate bit slipping in chuck.

#ad



IRWIN Tools 1869518 Impact Performance Series Quick Change Bit Extension, 1/4-Inch Shank, 18-Inch Length

#ad
IRWIN 1869518 #ad - Plus, the 1/4" quick-change shank works with impact drivers and reduces slipping in standard drill chucks. Drive anchor provides a secure hold in concrete, brick, block, and stone. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer sold separately to expand and grip the mounting material.

Black oxide finish resists corrosion and increases life of extension. These extensions have a large chuck that withstands the high torque of impact drivers, and the black oxide finish resists corrosion and increases life of the extension. Diameter: 1/4". Gsa ffs-325 group v, Type 2, Class 2 specifications. Irwin impact performance series Quick-Change Extensions are engineered for maximum durability and long life with impact drivers.

IRWIN Tools 1869518 Impact Performance Series Quick Change Bit Extension, 1/4-Inch Shank, 18-Inch Length #ad - Drill size: 1/4 inch. Length: 2-1/4 inches. Steep flutes - deliver fast material removal. Large chuck withstands higher torque demands of impact drills. Improved carbide tip provides up to 2X longer life. Meets fed. Length: 1-3/4 inch.

#ad



Bosch TI2143IM 1/4-Inch Impact Tough Titanium Drill Bit,

#ad
Bosch TI2143IM #ad - Diameter: 1/4". Easy to use. Multi-application design - offers drilling in in wood and a variety of other materials. Electricians, plumbers and hvac pros will appreciate the tough construction of the bit, rated for heavy-gauge carbon steels, as well as light gauge metal and hardwood applications. Ultimate tensile strength for a static load is 800 lb.

Sharp ground cutting edges - designed for advanced performance. One year warranty, one year service contract, 30 day no-risk trial. Material: Steel. Designed for use in the higher torque impact drill/drivers, they have an upgraded tip design for no-skate starts and a titanium cooling shield thanks to the titanium nitrate coating.

Bosch TI2143IM 1/4-Inch Impact Tough Titanium Drill Bit, #ad - Designed for heavy-gauge and high-carbon steel. Three flats on shank eliminate bit slipping in chuck. Diameter: 1/4". Rock carbide tip maximizes carbide surface contact for longer bit life. Four flute design cleans debris out for fast, efficient drilling. Finish: Zinc. Length: 1-3/4 inch. Drill size: 1/4 inch.

#ad